{
  "type": "designer",
  "version": "1.5.0",
  "documents": [
    {
      "schemaVersion": 1,
      "kind": "assembly",
      "id": "e9a1c0de-0000-4000-8000-000000000001",
      "up": "z",
      "units": {
        "length": "mm"
      },
      "meta": {
        "name": "Single-cylinder engine",
        "generator": "engine-app",
        "description": "A four-stroke side-valve single: the crank turns the rod and piston, a 20 to 40 tooth gear pair turns the camshaft at half speed, and its lobes lift the tappets and valves against their springs."
      },
      "parameters": {
        "crank": {
          "value": 0,
          "unit": "deg",
          "min": 0,
          "max": 720,
          "step": 1,
          "label": "Crank angle",
          "group": "Motion",
          "description": "Where the crankshaft stands in the four-stroke cycle: two turns, from top dead centre on the intake stroke"
        },
        "liftIn": {
          "value": "if(cos(crank / 2 - 55) > cos(66), 2 * (1 + cos(180 * acos(cos(crank / 2 - 55)) / 66)), 0)",
          "unit": "mm",
          "group": "Motion",
          "label": "Intake cam lift",
          "description": "How far the intake lobe lifts its tappet off the base circle at this crank angle"
        },
        "valveIn": {
          "value": "max(0, if(cos(crank / 2 - 55) > cos(66), 2 * (1 + cos(180 * acos(cos(crank / 2 - 55)) / 66)), 0) - 0.05)",
          "unit": "mm",
          "group": "Motion",
          "label": "Intake valve lift",
          "description": "How far the intake valve stands off its seat: the cam's lift less the tappet clearance"
        },
        "liftEx": {
          "value": "if(cos(crank / 2 - 305) > cos(66), 2 * (1 + cos(180 * acos(cos(crank / 2 - 305)) / 66)), 0)",
          "unit": "mm",
          "group": "Motion",
          "label": "Exhaust cam lift",
          "description": "How far the exhaust lobe lifts its tappet off the base circle at this crank angle"
        },
        "valveEx": {
          "value": "max(0, if(cos(crank / 2 - 305) > cos(66), 2 * (1 + cos(180 * acos(cos(crank / 2 - 305)) / 66)), 0) - 0.05)",
          "unit": "mm",
          "group": "Motion",
          "label": "Exhaust valve lift",
          "description": "How far the exhaust valve stands off its seat: the cam's lift less the tappet clearance"
        }
      },
      "configurations": [
        {
          "id": "intake",
          "name": "Intake",
          "values": {
            "crank": 90
          }
        },
        {
          "id": "compression",
          "name": "Compression",
          "values": {
            "crank": 270
          }
        },
        {
          "id": "power",
          "name": "Power",
          "values": {
            "crank": 450
          }
        },
        {
          "id": "exhaust",
          "name": "Exhaust",
          "values": {
            "crank": 630
          }
        }
      ],
      "components": [
        {
          "id": "block",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000002",
            "part": "block"
          }
        },
        {
          "id": "head",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000f",
            "part": "head"
          }
        },
        {
          "id": "cover",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000010",
            "part": "cover"
          }
        },
        {
          "id": "bearingA",
          "name": "Main bearing, flywheel side",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000013",
            "part": "bearing"
          }
        },
        {
          "id": "bearingB",
          "name": "Main bearing, gear side",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000013",
            "part": "bearing"
          }
        },
        {
          "id": "crankshaft",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000003",
            "part": "crankshaft"
          }
        },
        {
          "id": "crankGear",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000008",
            "part": "crankGear"
          }
        },
        {
          "id": "gearKey",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000015",
            "part": "key",
            "parameters": {
              "shaftDiameter": 20,
              "length": 8
            }
          }
        },
        {
          "id": "flywheel",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000e",
            "part": "flywheel"
          }
        },
        {
          "id": "flywheelKey",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000015",
            "part": "key",
            "parameters": {
              "shaftDiameter": 18,
              "length": 10
            }
          }
        },
        {
          "id": "starterCup",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000018",
            "part": "starterCup"
          }
        },
        {
          "id": "starterScrew",
          "name": "Starter cup screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M4",
              "length": 8
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "starterCup",
              "connector": "screws"
            }
          }
        },
        {
          "id": "rod",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000004",
            "part": "rod"
          }
        },
        {
          "id": "rodCap",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000d",
            "part": "rodCap"
          }
        },
        {
          "id": "capScrew",
          "name": "Rod cap screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "length": 16
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "rodCap",
              "connector": "bolts"
            }
          }
        },
        {
          "id": "piston",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000005",
            "part": "piston"
          }
        },
        {
          "id": "gudgeonPin",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000006",
            "part": "gudgeonPin"
          }
        },
        {
          "id": "circlipA",
          "name": "Circlip, back",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000002c",
            "part": "circlip"
          }
        },
        {
          "id": "circlipB",
          "name": "Circlip, front",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000002c",
            "part": "circlip"
          }
        },
        {
          "id": "ring1",
          "name": "Compression ring 1",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000016",
            "part": "pistonRing"
          }
        },
        {
          "id": "ring2",
          "name": "Compression ring 2",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000016",
            "part": "pistonRing"
          }
        },
        {
          "id": "ring3",
          "name": "Oil ring",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000016",
            "part": "pistonRing"
          }
        },
        {
          "id": "camshaft",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000007",
            "part": "camshaft"
          }
        },
        {
          "id": "camGear",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000009",
            "part": "camGear"
          }
        },
        {
          "id": "tappetIn",
          "name": "Intake tappet",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000a",
            "part": "tappet"
          }
        },
        {
          "id": "valveIn",
          "name": "Intake valve",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000b",
            "part": "valve"
          }
        },
        {
          "id": "retainerIn",
          "name": "Intake spring retainer",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000c",
            "part": "retainer"
          }
        },
        {
          "id": "seatIn",
          "name": "Intake spring seat",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000017",
            "part": "springSeat"
          }
        },
        {
          "id": "springIn",
          "name": "Intake valve spring",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000014",
            "part": "spring",
            "parameters": {
              "length": "22.2 - valveIn"
            }
          }
        },
        {
          "id": "tappetEx",
          "name": "Exhaust tappet",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000a",
            "part": "tappet"
          }
        },
        {
          "id": "valveEx",
          "name": "Exhaust valve",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000b",
            "part": "valve"
          }
        },
        {
          "id": "retainerEx",
          "name": "Exhaust spring retainer",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000000c",
            "part": "retainer"
          }
        },
        {
          "id": "seatEx",
          "name": "Exhaust spring seat",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000017",
            "part": "springSeat"
          }
        },
        {
          "id": "springEx",
          "name": "Exhaust valve spring",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000014",
            "part": "spring",
            "parameters": {
              "length": "22.2 - valveEx"
            }
          }
        },
        {
          "id": "headBolt",
          "name": "Head bolt",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "length": 30
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "head",
              "connector": "bolts"
            }
          }
        },
        {
          "id": "coverScrew",
          "name": "Cover screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M5",
              "length": 16
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "cover",
              "connector": "plateBolts"
            }
          }
        },
        {
          "id": "gearCoverScrew",
          "name": "Cover screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M5",
              "length": 16
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "cover",
              "connector": "roundBolts"
            }
          }
        },
        {
          "id": "sparkPlug",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000011",
            "part": "sparkPlug"
          }
        },
        {
          "id": "chestCover",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000001d",
            "part": "chestCover"
          }
        },
        {
          "id": "chestCoverScrew",
          "name": "Chest cover screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M4",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "chestCover",
              "connector": "screws"
            }
          }
        },
        {
          "id": "exhaust",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000001b",
            "part": "exhaust"
          }
        },
        {
          "id": "exhaustScrew",
          "name": "Exhaust flange screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M4",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "exhaust",
              "connector": "screws"
            }
          }
        },
        {
          "id": "carburettor",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000001a",
            "part": "carburettor"
          }
        },
        {
          "id": "carburettorScrew",
          "name": "Carburettor flange screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M4",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "carburettor",
              "connector": "screws"
            }
          }
        },
        {
          "id": "airFilter",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000001e",
            "part": "airFilter"
          }
        },
        {
          "id": "wingNut",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000001f",
            "part": "wingNut"
          }
        },
        {
          "id": "ignition",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000019",
            "part": "ignition"
          }
        },
        {
          "id": "ignitionScrew",
          "name": "Coil bracket screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M4",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "ignition",
              "connector": "screws"
            }
          }
        },
        {
          "id": "coreScrew",
          "name": "Coil core screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M4",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "ignition",
              "connector": "coreScrews"
            }
          }
        },
        {
          "id": "plugCap",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000001c",
            "part": "plugCap"
          }
        },
        {
          "id": "fillerCap",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000020",
            "part": "fillerCap"
          }
        },
        {
          "id": "drainPlug",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000021",
            "part": "drainPlug"
          }
        },
        {
          "id": "nameplate",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000022",
            "part": "nameplate"
          }
        },
        {
          "id": "governorArm",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000023",
            "part": "governorArm"
          }
        },
        {
          "id": "flywheelMagnet",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000024",
            "part": "flywheelMagnet"
          }
        },
        {
          "id": "headGasket",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000025",
            "part": "headGasket"
          }
        },
        {
          "id": "coverGasket",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000025",
            "part": "coverGasket"
          }
        },
        {
          "id": "chestGasket",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000025",
            "part": "chestGasket"
          }
        },
        {
          "id": "exhaustGasket",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000025",
            "part": "exhaustGasket"
          }
        },
        {
          "id": "intakeGasket",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000025",
            "part": "intakeGasket"
          }
        },
        {
          "id": "governorLink",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000026",
            "part": "governorLink"
          }
        },
        {
          "id": "fuelTank",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000027",
            "part": "fuelTank"
          }
        },
        {
          "id": "tankScrew0",
          "name": "Fuel tank screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M5",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "fuelTank",
              "connector": "screws0"
            }
          }
        },
        {
          "id": "tankScrew1",
          "name": "Fuel tank screw",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000012",
            "part": "screw",
            "parameters": {
              "size": "M5",
              "length": 10
            }
          },
          "replicate": {
            "connector": "seat",
            "to": {
              "component": "fuelTank",
              "connector": "screws1"
            }
          }
        },
        {
          "id": "tankCap",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000002a",
            "part": "tankCap"
          }
        },
        {
          "id": "fuelTap",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000028",
            "part": "fuelTap"
          }
        },
        {
          "id": "hoseEnds",
          "name": "Hose ends and clamps",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-00000000002b",
            "part": "hoseEnds"
          }
        },
        {
          "id": "fuelHose",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000029",
            "part": "fuelHose"
          }
        },
        {
          "id": "governorSpring",
          "name": "Governor damper spring",
          "source": {
            "document": "e9a1c0de-0000-4000-8000-000000000014",
            "part": "spring",
            "parameters": {
              "wireDiameter": 0.5,
              "diameter": 4.2,
              "activeCoils": 8,
              "length": 16.5
            }
          }
        }
      ],
      "joints": [
        {
          "id": "headGasketSeat",
          "type": "fastened",
          "component": "headGasket",
          "connector": "bottom",
          "to": {
            "component": "block",
            "connector": "deck"
          }
        },
        {
          "id": "headSeat",
          "type": "fastened",
          "component": "head",
          "connector": "gasket",
          "to": {
            "component": "headGasket",
            "connector": "top"
          }
        },
        {
          "id": "coverGasketSeat",
          "type": "fastened",
          "component": "coverGasket",
          "connector": "bottom",
          "to": {
            "component": "block",
            "connector": "front"
          }
        },
        {
          "id": "coverSeat",
          "type": "fastened",
          "component": "cover",
          "connector": "inside",
          "to": {
            "component": "coverGasket",
            "connector": "top"
          }
        },
        {
          "id": "bearingASeat",
          "type": "fastened",
          "component": "bearingA",
          "connector": "outer",
          "to": {
            "component": "block",
            "connector": "bearing"
          }
        },
        {
          "id": "bearingBSeat",
          "type": "fastened",
          "component": "bearingB",
          "connector": "outer",
          "to": {
            "component": "cover",
            "connector": "bearing"
          }
        },
        {
          "id": "crank",
          "type": "revolute",
          "component": "crankshaft",
          "connector": "drive",
          "to": {
            "frame": {
              "origin": [
                0,
                70,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "flip": true,
          "angle": "crank"
        },
        {
          "id": "crankGearSeat",
          "type": "fastened",
          "component": "crankGear",
          "connector": "seat",
          "to": {
            "component": "crankshaft",
            "connector": "gearSeat"
          },
          "offset": 0.05
        },
        {
          "id": "gearKeySeat",
          "type": "fastened",
          "component": "gearKey",
          "connector": "bottom",
          "to": {
            "component": "crankshaft",
            "connector": "gearKey"
          }
        },
        {
          "id": "flywheelSeat",
          "type": "fastened",
          "component": "flywheel",
          "connector": "seat",
          "to": {
            "component": "crankshaft",
            "connector": "flywheelSeat"
          },
          "offset": 0.05
        },
        {
          "id": "flywheelKeySeat",
          "type": "fastened",
          "component": "flywheelKey",
          "connector": "bottom",
          "to": {
            "component": "crankshaft",
            "connector": "flywheelKey"
          }
        },
        {
          "id": "starterCupSeat",
          "type": "fastened",
          "component": "starterCup",
          "connector": "seat",
          "to": {
            "component": "flywheel",
            "connector": "starter"
          }
        },
        {
          "id": "bigEnd",
          "type": "revolute",
          "component": "rod",
          "connector": "big",
          "to": {
            "component": "crankshaft",
            "connector": "pin"
          },
          "angle": "-asin(24 * sin(crank) / 90) - crank",
          "offset": 1
        },
        {
          "id": "capSeat",
          "type": "fastened",
          "component": "rodCap",
          "connector": "parting",
          "to": {
            "component": "rod",
            "connector": "parting"
          }
        },
        {
          "id": "bore",
          "type": "slider",
          "component": "piston",
          "connector": "crown",
          "to": {
            "component": "block",
            "connector": "deck"
          },
          "flip": true,
          "offset": "-1 + 24 * cos(crank) + sqrt(8100 - 576 * sin(crank) ^ 2) - 114"
        },
        {
          "id": "pinSeat",
          "type": "fastened",
          "component": "gudgeonPin",
          "connector": "end",
          "to": {
            "component": "piston",
            "connector": "boss"
          },
          "offset": -13
        },
        {
          "id": "circlipASeat",
          "type": "fastened",
          "component": "circlipA",
          "connector": "side",
          "to": {
            "component": "piston",
            "connector": "clipA"
          }
        },
        {
          "id": "circlipBSeat",
          "type": "fastened",
          "component": "circlipB",
          "connector": "side",
          "to": {
            "component": "piston",
            "connector": "clipB"
          }
        },
        {
          "id": "ring1Seat",
          "type": "fastened",
          "component": "ring1",
          "connector": "top",
          "to": {
            "component": "piston",
            "connector": "crown"
          },
          "flip": true,
          "offset": -3.05
        },
        {
          "id": "ring2Seat",
          "type": "fastened",
          "component": "ring2",
          "connector": "top",
          "to": {
            "component": "piston",
            "connector": "crown"
          },
          "flip": true,
          "offset": -6.55
        },
        {
          "id": "ring3Seat",
          "type": "fastened",
          "component": "ring3",
          "connector": "top",
          "to": {
            "component": "piston",
            "connector": "crown"
          },
          "flip": true,
          "offset": -10.05
        },
        {
          "id": "cam",
          "type": "revolute",
          "component": "camshaft",
          "connector": "drive",
          "to": {
            "frame": {
              "origin": [
                42,
                59,
                42.848571
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "flip": true,
          "angle": "-crank * 20 / 40"
        },
        {
          "id": "camGearSeat",
          "type": "fastened",
          "component": "camGear",
          "connector": "seat",
          "to": {
            "component": "camshaft",
            "connector": "gearSeat"
          },
          "offset": 0.05
        },
        {
          "id": "tappetInBore",
          "type": "slider",
          "component": "tappetIn",
          "connector": "top",
          "to": {
            "component": "block",
            "connector": "valveIn"
          },
          "flip": true,
          "offset": "-56.101429 + liftIn"
        },
        {
          "id": "valveInGuide",
          "type": "slider",
          "component": "valveIn",
          "connector": "top",
          "to": {
            "component": "block",
            "connector": "valveIn"
          },
          "flip": true,
          "offset": "0.05 + valveIn"
        },
        {
          "id": "retainerInSeat",
          "type": "fastened",
          "component": "retainerIn",
          "connector": "top",
          "to": {
            "component": "valveIn",
            "connector": "top"
          },
          "flip": true,
          "offset": -53.05
        },
        {
          "id": "seatInSeat",
          "type": "fastened",
          "component": "seatIn",
          "connector": "top",
          "to": {
            "component": "block",
            "connector": "springIn"
          }
        },
        {
          "id": "springInSeat",
          "type": "fastened",
          "component": "springIn",
          "connector": "top",
          "to": {
            "component": "seatIn",
            "connector": "bottom"
          },
          "offset": 0.15
        },
        {
          "id": "tappetExBore",
          "type": "slider",
          "component": "tappetEx",
          "connector": "top",
          "to": {
            "component": "block",
            "connector": "valveEx"
          },
          "flip": true,
          "offset": "-56.101429 + liftEx"
        },
        {
          "id": "valveExGuide",
          "type": "slider",
          "component": "valveEx",
          "connector": "top",
          "to": {
            "component": "block",
            "connector": "valveEx"
          },
          "flip": true,
          "offset": "0.05 + valveEx"
        },
        {
          "id": "retainerExSeat",
          "type": "fastened",
          "component": "retainerEx",
          "connector": "top",
          "to": {
            "component": "valveEx",
            "connector": "top"
          },
          "flip": true,
          "offset": -53.05
        },
        {
          "id": "seatExSeat",
          "type": "fastened",
          "component": "seatEx",
          "connector": "top",
          "to": {
            "component": "block",
            "connector": "springEx"
          }
        },
        {
          "id": "springExSeat",
          "type": "fastened",
          "component": "springEx",
          "connector": "top",
          "to": {
            "component": "seatEx",
            "connector": "bottom"
          },
          "offset": 0.15
        },
        {
          "id": "plugSeat",
          "type": "fastened",
          "component": "sparkPlug",
          "connector": "seat",
          "to": {
            "component": "head",
            "connector": "plug.plug"
          }
        },
        {
          "id": "chestGasketSeat",
          "type": "fastened",
          "component": "chestGasket",
          "connector": "bottom",
          "to": {
            "component": "block",
            "connector": "window"
          }
        },
        {
          "id": "chestCoverSeat",
          "type": "fastened",
          "component": "chestCover",
          "connector": "seat",
          "to": {
            "component": "chestGasket",
            "connector": "top"
          }
        },
        {
          "id": "exhaustGasketSeat",
          "type": "fastened",
          "component": "exhaustGasket",
          "connector": "bottom",
          "to": {
            "component": "block",
            "connector": "portEx"
          }
        },
        {
          "id": "exhaustSeat",
          "type": "fastened",
          "component": "exhaust",
          "connector": "seat",
          "to": {
            "component": "exhaustGasket",
            "connector": "top"
          }
        },
        {
          "id": "intakeGasketSeat",
          "type": "fastened",
          "component": "intakeGasket",
          "connector": "bottom",
          "to": {
            "component": "block",
            "connector": "portIn"
          }
        },
        {
          "id": "carburettorSeat",
          "type": "fastened",
          "component": "carburettor",
          "connector": "seat",
          "to": {
            "component": "intakeGasket",
            "connector": "top"
          }
        },
        {
          "id": "airFilterSeat",
          "type": "fastened",
          "component": "airFilter",
          "connector": "seat",
          "to": {
            "component": "carburettor",
            "connector": "outlet"
          }
        },
        {
          "id": "wingNutSeat",
          "type": "fastened",
          "component": "wingNut",
          "connector": "seat",
          "to": {
            "component": "airFilter",
            "connector": "nut"
          }
        },
        {
          "id": "ignitionSeat",
          "type": "fastened",
          "component": "ignition",
          "connector": "seat",
          "to": {
            "component": "block",
            "connector": "magneto"
          }
        },
        {
          "id": "plugCapSeat",
          "type": "fastened",
          "component": "plugCap",
          "connector": "terminal",
          "to": {
            "component": "sparkPlug",
            "connector": "terminal"
          },
          "offset": 0.05
        },
        {
          "id": "fillerCapSeat",
          "type": "fastened",
          "component": "fillerCap",
          "connector": "seat",
          "to": {
            "component": "block",
            "connector": "filler"
          }
        },
        {
          "id": "drainPlugSeat",
          "type": "fastened",
          "component": "drainPlug",
          "connector": "seat",
          "to": {
            "component": "block",
            "connector": "drain"
          }
        },
        {
          "id": "nameplateSeat",
          "type": "fastened",
          "component": "nameplate",
          "connector": "seat",
          "to": {
            "component": "block",
            "connector": "nameplate"
          }
        },
        {
          "id": "governorArmSeat",
          "type": "fastened",
          "component": "governorArm",
          "connector": "seat",
          "to": {
            "component": "block",
            "connector": "governor"
          }
        },
        {
          "id": "magnetSeat",
          "type": "fastened",
          "component": "flywheelMagnet",
          "connector": "seat",
          "to": {
            "component": "flywheel",
            "connector": "magnet"
          },
          "offset": 0.05
        },
        {
          "id": "fuelTankSeat",
          "type": "fastened",
          "component": "fuelTank",
          "connector": "seat",
          "to": {
            "component": "block",
            "connector": "tank"
          }
        },
        {
          "id": "tankCapSeat",
          "type": "fastened",
          "component": "tankCap",
          "connector": "seat",
          "to": {
            "component": "fuelTank",
            "connector": "neck"
          }
        },
        {
          "id": "fuelTapSeat",
          "type": "fastened",
          "component": "fuelTap",
          "connector": "seat",
          "to": {
            "component": "fuelTank",
            "connector": "tap"
          }
        },
        {
          "id": "hoseEndsSeat",
          "type": "fastened",
          "component": "hoseEnds",
          "connector": "tap",
          "to": {
            "component": "fuelTap",
            "connector": "hose"
          },
          "offset": 0.1
        },
        {
          "id": "fuelHoseSeat",
          "type": "fastened",
          "component": "fuelHose",
          "connector": "tap",
          "to": {
            "component": "hoseEnds",
            "connector": "hose"
          },
          "offset": 0.05
        },
        {
          "id": "governorLinkSeat",
          "type": "fastened",
          "component": "governorLink",
          "connector": "arm",
          "to": {
            "component": "governorArm",
            "connector": "link"
          },
          "offset": 0.05
        },
        {
          "id": "governorSpringSeat",
          "type": "fastened",
          "component": "governorSpring",
          "connector": "bottom",
          "to": {
            "component": "governorLink",
            "connector": "damper"
          },
          "offset": 0.15
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000002",
      "up": "z",
      "meta": {
        "name": "Block",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "crankcaseProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                50,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -58,
            50
          ],
          "pen": [
            {
              "type": "line",
              "id": "crankcaseProfile0",
              "to": [
                -58,
                -40
              ]
            },
            {
              "type": "filletCorner",
              "id": "crankcaseProfileRound0",
              "radius": 14
            },
            {
              "type": "line",
              "id": "crankcaseProfile1",
              "to": [
                -40,
                -58
              ]
            },
            {
              "type": "filletCorner",
              "id": "crankcaseProfileRound1",
              "radius": 14
            },
            {
              "type": "line",
              "id": "crankcaseProfile2",
              "to": [
                40,
                -58
              ]
            },
            {
              "type": "filletCorner",
              "id": "crankcaseProfileRound2",
              "radius": 14
            },
            {
              "type": "line",
              "id": "crankcaseProfile3",
              "to": [
                58,
                -40
              ]
            },
            {
              "type": "filletCorner",
              "id": "crankcaseProfileRound3",
              "radius": 14
            },
            {
              "type": "line",
              "id": "crankcaseProfile4",
              "to": [
                58,
                50
              ]
            },
            {
              "type": "filletCorner",
              "id": "crankcaseProfileRound4",
              "radius": 6
            },
            {
              "type": "close",
              "id": "crankcaseProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "crankcaseProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "crankcase",
          "type": "extrude",
          "profile": "crankcaseProfile",
          "distance": 90
        },
        {
          "id": "crankcaseBackRound",
          "type": "fillet",
          "body": "crankcase",
          "edges": {
            "between": [
              {
                "of": "crankcase",
                "role": "end"
              },
              {
                "of": "crankcase",
                "role": "side"
              }
            ],
            "count": 12
          },
          "radius": 4
        },
        {
          "id": "camCaseProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                50,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "camCaseProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 25
            }
          ]
        },
        {
          "id": "camCase",
          "type": "extrude",
          "profile": "camCaseProfile",
          "distance": 90
        },
        {
          "id": "camCaseBackRound",
          "type": "fillet",
          "body": "camCase",
          "edges": {
            "between": [
              {
                "of": "camCase",
                "role": "end"
              },
              {
                "of": "camCase",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 3
        },
        {
          "id": "gearCaseProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                50,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "gearCaseProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 50
            }
          ]
        },
        {
          "id": "gearCase",
          "type": "extrude",
          "profile": "gearCaseProfile",
          "distance": 22
        },
        {
          "id": "gearCaseBackRound",
          "type": "fillet",
          "body": "gearCase",
          "edges": {
            "between": [
              {
                "of": "gearCase",
                "role": "end"
              },
              {
                "of": "gearCase",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 3
        },
        {
          "id": "barrelProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            24,
            40
          ],
          "pen": [
            {
              "type": "line",
              "id": "barrelProfile0",
              "to": [
                36,
                40
              ]
            },
            {
              "type": "line",
              "id": "barrelProfile1",
              "to": [
                36,
                49
              ]
            },
            {
              "type": "line",
              "id": "barrelProfile2",
              "to": [
                32,
                54
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound2",
              "radius": 3
            },
            {
              "type": "line",
              "id": "barrelProfile3",
              "to": [
                32,
                70
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound3",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile4",
              "to": [
                42,
                70.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound4",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile5",
              "to": [
                42,
                72.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound5",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile6",
              "to": [
                32,
                73
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound6",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile7",
              "to": [
                32,
                78
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound7",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile8",
              "to": [
                42.666667,
                78.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound8",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile9",
              "to": [
                42.666667,
                80.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound9",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile10",
              "to": [
                32,
                81
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound10",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile11",
              "to": [
                32,
                86
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound11",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile12",
              "to": [
                43.333333,
                86.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound12",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile13",
              "to": [
                43.333333,
                88.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound13",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile14",
              "to": [
                32,
                89
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound14",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile15",
              "to": [
                32,
                94
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound15",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile16",
              "to": [
                44,
                94.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound16",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile17",
              "to": [
                44,
                96.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound17",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile18",
              "to": [
                32,
                97
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound18",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile19",
              "to": [
                32,
                102
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound19",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile20",
              "to": [
                44.666667,
                102.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound20",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile21",
              "to": [
                44.666667,
                104.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound21",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile22",
              "to": [
                32,
                105
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound22",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile23",
              "to": [
                32,
                110
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound23",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile24",
              "to": [
                45.333333,
                110.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound24",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile25",
              "to": [
                45.333333,
                112.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound25",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile26",
              "to": [
                32,
                113
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound26",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile27",
              "to": [
                32,
                118
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound27",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile28",
              "to": [
                46,
                118.45
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound28",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile29",
              "to": [
                46,
                120.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound29",
              "radius": 0.85
            },
            {
              "type": "line",
              "id": "barrelProfile30",
              "to": [
                32,
                121
              ]
            },
            {
              "type": "filletCorner",
              "id": "barrelProfileRound30",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "barrelProfile31",
              "to": [
                32,
                128
              ]
            },
            {
              "type": "line",
              "id": "barrelProfile32",
              "to": [
                24,
                128
              ]
            },
            {
              "type": "close",
              "id": "barrelProfileClose"
            }
          ]
        },
        {
          "id": "barrel",
          "type": "revolve",
          "profile": "barrelProfile",
          "axis": {
            "origin": [
              0,
              0,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        },
        {
          "id": "rearLeftBossProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 108
          },
          "pen": [
            {
              "type": "circle",
              "id": "rearLeftBossProfileRim",
              "centre": [
                -28,
                -28
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "rearLeftBoss",
          "type": "extrude",
          "profile": "rearLeftBossProfile",
          "distance": 20
        },
        {
          "id": "rearLeftBossRound",
          "type": "fillet",
          "body": "rearLeftBoss",
          "edges": {
            "between": [
              {
                "of": "rearLeftBoss",
                "role": "start"
              },
              {
                "of": "rearLeftBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 2
        },
        {
          "id": "rearRightBossProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 108
          },
          "pen": [
            {
              "type": "circle",
              "id": "rearRightBossProfileRim",
              "centre": [
                -28,
                28
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "rearRightBoss",
          "type": "extrude",
          "profile": "rearRightBossProfile",
          "distance": 20
        },
        {
          "id": "rearRightBossRound",
          "type": "fillet",
          "body": "rearRightBoss",
          "edges": {
            "between": [
              {
                "of": "rearRightBoss",
                "role": "start"
              },
              {
                "of": "rearRightBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 2
        },
        {
          "id": "midLeftBossProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 108
          },
          "pen": [
            {
              "type": "circle",
              "id": "midLeftBossProfileRim",
              "centre": [
                14,
                -31
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "midLeftBoss",
          "type": "extrude",
          "profile": "midLeftBossProfile",
          "distance": 20
        },
        {
          "id": "midLeftBossRound",
          "type": "fillet",
          "body": "midLeftBoss",
          "edges": {
            "between": [
              {
                "of": "midLeftBoss",
                "role": "start"
              },
              {
                "of": "midLeftBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 2
        },
        {
          "id": "midRightBossProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 108
          },
          "pen": [
            {
              "type": "circle",
              "id": "midRightBossProfileRim",
              "centre": [
                14,
                31
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "midRightBoss",
          "type": "extrude",
          "profile": "midRightBossProfile",
          "distance": 20
        },
        {
          "id": "midRightBossRound",
          "type": "fillet",
          "body": "midRightBoss",
          "edges": {
            "between": [
              {
                "of": "midRightBoss",
                "role": "start"
              },
              {
                "of": "midRightBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 2
        },
        {
          "id": "chestProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 50
          },
          "start": [
            28,
            -34
          ],
          "pen": [
            {
              "type": "line",
              "id": "chestProfile0",
              "to": [
                60,
                -34
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRound0",
              "radius": 5
            },
            {
              "type": "line",
              "id": "chestProfile1",
              "to": [
                60,
                34
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRound1",
              "radius": 5
            },
            {
              "type": "line",
              "id": "chestProfile2",
              "to": [
                28,
                34
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRound2",
              "radius": 5
            },
            {
              "type": "close",
              "id": "chestProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRoundStart",
              "radius": 5
            }
          ]
        },
        {
          "id": "chest",
          "type": "extrude",
          "profile": "chestProfile",
          "distance": 78
        },
        {
          "id": "deckProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 127
          },
          "start": [
            -36,
            -36
          ],
          "pen": [
            {
              "type": "line",
              "id": "deckProfile0",
              "to": [
                62,
                -36
              ]
            },
            {
              "type": "filletCorner",
              "id": "deckProfileRound0",
              "radius": 10
            },
            {
              "type": "line",
              "id": "deckProfile1",
              "to": [
                62,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "deckProfileRound1",
              "radius": 10
            },
            {
              "type": "line",
              "id": "deckProfile2",
              "to": [
                -36,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "deckProfileRound2",
              "radius": 10
            },
            {
              "type": "close",
              "id": "deckProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "deckProfileRoundStart",
              "radius": 10
            }
          ]
        },
        {
          "id": "deckPlate",
          "type": "extrude",
          "profile": "deckProfile",
          "distance": 10
        },
        {
          "id": "deckPlateRound",
          "type": "fillet",
          "body": "deckPlate",
          "edges": {
            "between": [
              {
                "of": "deckPlate",
                "role": "start"
              },
              {
                "of": "deckPlate",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 2
        },
        {
          "id": "portInPadProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -34,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            28,
            112
          ],
          "pen": [
            {
              "type": "line",
              "id": "portInPadProfile0",
              "to": [
                54,
                112
              ]
            },
            {
              "type": "filletCorner",
              "id": "portInPadProfileRound0",
              "radius": 4
            },
            {
              "type": "line",
              "id": "portInPadProfile1",
              "to": [
                54,
                134
              ]
            },
            {
              "type": "filletCorner",
              "id": "portInPadProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "portInPadProfile2",
              "to": [
                28,
                134
              ]
            },
            {
              "type": "filletCorner",
              "id": "portInPadProfileRound2",
              "radius": 4
            },
            {
              "type": "close",
              "id": "portInPadProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "portInPadProfileRoundStart",
              "radius": 4
            }
          ]
        },
        {
          "id": "portInPad",
          "type": "extrude",
          "profile": "portInPadProfile",
          "distance": 3
        },
        {
          "id": "portExPadProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                34,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            28,
            -134
          ],
          "pen": [
            {
              "type": "line",
              "id": "portExPadProfile0",
              "to": [
                54,
                -134
              ]
            },
            {
              "type": "filletCorner",
              "id": "portExPadProfileRound0",
              "radius": 4
            },
            {
              "type": "line",
              "id": "portExPadProfile1",
              "to": [
                54,
                -112
              ]
            },
            {
              "type": "filletCorner",
              "id": "portExPadProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "portExPadProfile2",
              "to": [
                28,
                -112
              ]
            },
            {
              "type": "filletCorner",
              "id": "portExPadProfileRound2",
              "radius": 4
            },
            {
              "type": "close",
              "id": "portExPadProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "portExPadProfileRoundStart",
              "radius": 4
            }
          ]
        },
        {
          "id": "portExPad",
          "type": "extrude",
          "profile": "portExPadProfile",
          "distance": 3
        },
        {
          "id": "baseProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": -76
          },
          "start": [
            -74,
            -34
          ],
          "pen": [
            {
              "type": "line",
              "id": "baseProfile0",
              "to": [
                74,
                -34
              ]
            },
            {
              "type": "filletCorner",
              "id": "baseProfileRound0",
              "radius": 10
            },
            {
              "type": "line",
              "id": "baseProfile1",
              "to": [
                74,
                46
              ]
            },
            {
              "type": "filletCorner",
              "id": "baseProfileRound1",
              "radius": 10
            },
            {
              "type": "line",
              "id": "baseProfile2",
              "to": [
                -74,
                46
              ]
            },
            {
              "type": "filletCorner",
              "id": "baseProfileRound2",
              "radius": 10
            },
            {
              "type": "close",
              "id": "baseProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "baseProfileRoundStart",
              "radius": 10
            }
          ]
        },
        {
          "id": "base",
          "type": "extrude",
          "profile": "baseProfile",
          "distance": 6
        },
        {
          "id": "baseRound",
          "type": "fillet",
          "body": "base",
          "edges": {
            "between": [
              {
                "of": "base",
                "role": "end"
              },
              {
                "of": "base",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 2
        },
        {
          "id": "footHoles",
          "type": "hole",
          "body": "base",
          "on": {
            "of": "base",
            "role": "end"
          },
          "direction": [
            1,
            0,
            0
          ],
          "at": [
            {
              "id": "leftBack",
              "x": -62,
              "y": -24
            },
            {
              "id": "leftFront",
              "x": -62,
              "y": 36
            },
            {
              "id": "rightBack",
              "x": 62,
              "y": -24
            },
            {
              "id": "rightFront",
              "x": 62,
              "y": 36
            }
          ],
          "diameter": 9,
          "counterbore": {
            "diameter": 16,
            "depth": 1
          }
        },
        {
          "id": "pedestalProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": -75
          },
          "start": [
            -32,
            -35
          ],
          "pen": [
            {
              "type": "line",
              "id": "pedestalProfile0",
              "to": [
                32,
                -35
              ]
            },
            {
              "type": "filletCorner",
              "id": "pedestalProfileRound0",
              "radius": 6
            },
            {
              "type": "line",
              "id": "pedestalProfile1",
              "to": [
                32,
                46
              ]
            },
            {
              "type": "filletCorner",
              "id": "pedestalProfileRound1",
              "radius": 6
            },
            {
              "type": "line",
              "id": "pedestalProfile2",
              "to": [
                -32,
                46
              ]
            },
            {
              "type": "filletCorner",
              "id": "pedestalProfileRound2",
              "radius": 6
            },
            {
              "type": "close",
              "id": "pedestalProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "pedestalProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "pedestal",
          "type": "extrude",
          "profile": "pedestalProfile",
          "distance": 18
        },
        {
          "id": "rib0RightProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -7.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            30,
            -71
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib0RightProfile0",
              "to": [
                70,
                -71
              ]
            },
            {
              "type": "line",
              "id": "rib0RightProfile1",
              "to": [
                70,
                -69
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib0RightProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "rib0RightProfile2",
              "to": [
                47,
                -46
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib0RightProfileRound2",
              "radius": 2
            },
            {
              "type": "line",
              "id": "rib0RightProfile3",
              "to": [
                30,
                -50
              ]
            },
            {
              "type": "close",
              "id": "rib0RightProfileClose"
            }
          ]
        },
        {
          "id": "rib0Right",
          "type": "extrude",
          "profile": "rib0RightProfile",
          "distance": 5
        },
        {
          "id": "rib0LeftProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -7.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -30,
            -71
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib0LeftProfile0",
              "to": [
                -70,
                -71
              ]
            },
            {
              "type": "line",
              "id": "rib0LeftProfile1",
              "to": [
                -70,
                -69
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib0LeftProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "rib0LeftProfile2",
              "to": [
                -47,
                -46
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib0LeftProfileRound2",
              "radius": 2
            },
            {
              "type": "line",
              "id": "rib0LeftProfile3",
              "to": [
                -30,
                -50
              ]
            },
            {
              "type": "close",
              "id": "rib0LeftProfileClose"
            }
          ]
        },
        {
          "id": "rib0Left",
          "type": "extrude",
          "profile": "rib0LeftProfile",
          "distance": 5
        },
        {
          "id": "rib1RightProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                22.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            30,
            -71
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib1RightProfile0",
              "to": [
                70,
                -71
              ]
            },
            {
              "type": "line",
              "id": "rib1RightProfile1",
              "to": [
                70,
                -69
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib1RightProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "rib1RightProfile2",
              "to": [
                47,
                -46
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib1RightProfileRound2",
              "radius": 2
            },
            {
              "type": "line",
              "id": "rib1RightProfile3",
              "to": [
                30,
                -50
              ]
            },
            {
              "type": "close",
              "id": "rib1RightProfileClose"
            }
          ]
        },
        {
          "id": "rib1Right",
          "type": "extrude",
          "profile": "rib1RightProfile",
          "distance": 5
        },
        {
          "id": "rib1LeftProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                22.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -30,
            -71
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib1LeftProfile0",
              "to": [
                -70,
                -71
              ]
            },
            {
              "type": "line",
              "id": "rib1LeftProfile1",
              "to": [
                -70,
                -69
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib1LeftProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "rib1LeftProfile2",
              "to": [
                -47,
                -46
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib1LeftProfileRound2",
              "radius": 2
            },
            {
              "type": "line",
              "id": "rib1LeftProfile3",
              "to": [
                -30,
                -50
              ]
            },
            {
              "type": "close",
              "id": "rib1LeftProfileClose"
            }
          ]
        },
        {
          "id": "rib1Left",
          "type": "extrude",
          "profile": "rib1LeftProfile",
          "distance": 5
        },
        {
          "id": "fillerBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -66,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "fillerBossProfileRim",
              "centre": [
                12,
                -12
              ],
              "radius": 12
            }
          ]
        },
        {
          "id": "fillerBoss",
          "type": "extrude",
          "profile": "fillerBossProfile",
          "distance": 11
        },
        {
          "id": "fillerBossRound",
          "type": "fillet",
          "body": "fillerBoss",
          "edges": {
            "between": [
              {
                "of": "fillerBoss",
                "role": "start"
              },
              {
                "of": "fillerBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1.5
        },
        {
          "id": "drainBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -62,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "drainBossProfileRim",
              "centre": [
                30,
                -26
              ],
              "radius": 8
            }
          ]
        },
        {
          "id": "drainBoss",
          "type": "extrude",
          "profile": "drainBossProfile",
          "distance": 7
        },
        {
          "id": "drainBossRound",
          "type": "fillet",
          "body": "drainBoss",
          "edges": {
            "between": [
              {
                "of": "drainBoss",
                "role": "start"
              },
              {
                "of": "drainBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1
        },
        {
          "id": "governorBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                55,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "governorBossProfileRim",
              "centre": [
                0,
                -5
              ],
              "radius": 9
            }
          ]
        },
        {
          "id": "governorBoss",
          "type": "extrude",
          "profile": "governorBossProfile",
          "distance": 9
        },
        {
          "id": "governorBossRound",
          "type": "fillet",
          "body": "governorBoss",
          "edges": {
            "between": [
              {
                "of": "governorBoss",
                "role": "end"
              },
              {
                "of": "governorBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1.2
        },
        {
          "id": "lower",
          "type": "boolean",
          "operation": "union",
          "body": "crankcase",
          "tools": [
            "camCase",
            "gearCase",
            "base",
            "pedestal",
            "fillerBoss",
            "drainBoss",
            "governorBoss",
            "rib0Right",
            "rib0Left",
            "rib1Right",
            "rib1Left"
          ]
        },
        {
          "id": "upper",
          "type": "boolean",
          "operation": "union",
          "body": "chest",
          "tools": [
            "deckPlate",
            "portInPad",
            "portExPad",
            "rearLeftBoss",
            "rearRightBoss",
            "midLeftBoss",
            "midRightBoss"
          ]
        },
        {
          "id": "finned",
          "type": "boolean",
          "operation": "union",
          "body": "barrel",
          "tools": [
            "chest"
          ]
        },
        {
          "id": "cast",
          "type": "boolean",
          "operation": "union",
          "body": "crankcase",
          "tools": [
            "barrel"
          ]
        },
        {
          "id": "crankCavityProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "crankCavityProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 40
            }
          ]
        },
        {
          "id": "crankCavity",
          "type": "extrude",
          "profile": "crankCavityProfile",
          "distance": 73
        },
        {
          "id": "rodCavityProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                11,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rodCavityProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 52
            }
          ]
        },
        {
          "id": "rodCavity",
          "type": "extrude",
          "profile": "rodCavityProfile",
          "distance": 22
        },
        {
          "id": "camCavityProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "camCavityProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 20.5
            }
          ]
        },
        {
          "id": "camCavity",
          "type": "extrude",
          "profile": "camCavityProfile",
          "distance": 73
        },
        {
          "id": "gearCavityProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "gearCavityProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 45
            }
          ]
        },
        {
          "id": "gearCavity",
          "type": "extrude",
          "profile": "gearCavityProfile",
          "distance": 18
        },
        {
          "id": "boreProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 30
          },
          "pen": [
            {
              "type": "circle",
              "id": "boreProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 26
            }
          ]
        },
        {
          "id": "bore",
          "type": "extrude",
          "profile": "boreProfile",
          "distance": 108
        },
        {
          "id": "tappetPocketProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 55
          },
          "start": [
            30,
            -25
          ],
          "pen": [
            {
              "type": "line",
              "id": "tappetPocketProfile0",
              "to": [
                54,
                -25
              ]
            },
            {
              "type": "line",
              "id": "tappetPocketProfile1",
              "to": [
                54,
                25
              ]
            },
            {
              "type": "line",
              "id": "tappetPocketProfile2",
              "to": [
                30,
                25
              ]
            },
            {
              "type": "close",
              "id": "tappetPocketProfileClose"
            }
          ]
        },
        {
          "id": "tappetPocket",
          "type": "extrude",
          "profile": "tappetPocketProfile",
          "distance": 11
        },
        {
          "id": "chamberProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 76
          },
          "start": [
            32,
            -26
          ],
          "pen": [
            {
              "type": "line",
              "id": "chamberProfile0",
              "to": [
                57,
                -26
              ]
            },
            {
              "type": "filletCorner",
              "id": "chamberProfileRound0",
              "radius": 4
            },
            {
              "type": "line",
              "id": "chamberProfile1",
              "to": [
                57,
                26
              ]
            },
            {
              "type": "filletCorner",
              "id": "chamberProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "chamberProfile2",
              "to": [
                32,
                26
              ]
            },
            {
              "type": "filletCorner",
              "id": "chamberProfileRound2",
              "radius": 4
            },
            {
              "type": "close",
              "id": "chamberProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "chamberProfileRoundStart",
              "radius": 4
            }
          ]
        },
        {
          "id": "chamber",
          "type": "extrude",
          "profile": "chamberProfile",
          "distance": 32
        },
        {
          "id": "windowProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                56,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -16,
            80
          ],
          "pen": [
            {
              "type": "line",
              "id": "windowProfile0",
              "to": [
                16,
                80
              ]
            },
            {
              "type": "filletCorner",
              "id": "windowProfileRound0",
              "radius": 4
            },
            {
              "type": "line",
              "id": "windowProfile1",
              "to": [
                16,
                104
              ]
            },
            {
              "type": "filletCorner",
              "id": "windowProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "windowProfile2",
              "to": [
                -16,
                104
              ]
            },
            {
              "type": "filletCorner",
              "id": "windowProfileRound2",
              "radius": 4
            },
            {
              "type": "close",
              "id": "windowProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "windowProfileRoundStart",
              "radius": 4
            }
          ]
        },
        {
          "id": "window",
          "type": "extrude",
          "profile": "windowProfile",
          "distance": 5
        },
        {
          "id": "tappetBoreInProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 60
          },
          "pen": [
            {
              "type": "circle",
              "id": "tappetBoreInProfileRim",
              "centre": [
                42,
                -14
              ],
              "radius": 5.1
            }
          ]
        },
        {
          "id": "tappetBoreIn",
          "type": "extrude",
          "profile": "tappetBoreInProfile",
          "distance": 17
        },
        {
          "id": "guideInProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 107
          },
          "pen": [
            {
              "type": "circle",
              "id": "guideInProfileRim",
              "centre": [
                42,
                -14
              ],
              "radius": 3.55
            }
          ]
        },
        {
          "id": "guideIn",
          "type": "extrude",
          "profile": "guideInProfile",
          "distance": 31
        },
        {
          "id": "pocketInProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 134
          },
          "pen": [
            {
              "type": "circle",
              "id": "pocketInProfileRim",
              "centre": [
                42,
                -14
              ],
              "radius": 11.6
            }
          ]
        },
        {
          "id": "pocketIn",
          "type": "extrude",
          "profile": "pocketInProfile",
          "distance": 4
        },
        {
          "id": "throatInProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 119
          },
          "pen": [
            {
              "type": "circle",
              "id": "throatInProfileRim",
              "centre": [
                42,
                -14
              ],
              "radius": 9
            }
          ]
        },
        {
          "id": "throatIn",
          "type": "extrude",
          "profile": "throatInProfile",
          "distance": 15.5
        },
        {
          "id": "portInProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -14,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "portInProfileRim",
              "centre": [
                41,
                123
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "portIn",
          "type": "extrude",
          "profile": "portInProfile",
          "distance": 24
        },
        {
          "id": "tappetBoreExProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 60
          },
          "pen": [
            {
              "type": "circle",
              "id": "tappetBoreExProfileRim",
              "centre": [
                42,
                14
              ],
              "radius": 5.1
            }
          ]
        },
        {
          "id": "tappetBoreEx",
          "type": "extrude",
          "profile": "tappetBoreExProfile",
          "distance": 17
        },
        {
          "id": "guideExProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 107
          },
          "pen": [
            {
              "type": "circle",
              "id": "guideExProfileRim",
              "centre": [
                42,
                14
              ],
              "radius": 3.55
            }
          ]
        },
        {
          "id": "guideEx",
          "type": "extrude",
          "profile": "guideExProfile",
          "distance": 31
        },
        {
          "id": "pocketExProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 134
          },
          "pen": [
            {
              "type": "circle",
              "id": "pocketExProfileRim",
              "centre": [
                42,
                14
              ],
              "radius": 11.6
            }
          ]
        },
        {
          "id": "pocketEx",
          "type": "extrude",
          "profile": "pocketExProfile",
          "distance": 4
        },
        {
          "id": "throatExProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 119
          },
          "pen": [
            {
              "type": "circle",
              "id": "throatExProfileRim",
              "centre": [
                42,
                14
              ],
              "radius": 9
            }
          ]
        },
        {
          "id": "throatEx",
          "type": "extrude",
          "profile": "throatExProfile",
          "distance": 15.5
        },
        {
          "id": "portExProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                14,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "portExProfileRim",
              "centre": [
                41,
                -123
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "portEx",
          "type": "extrude",
          "profile": "portExProfile",
          "distance": 24
        },
        {
          "id": "fillerBoreProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -67,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "fillerBoreProfileRim",
              "centre": [
                12,
                -12
              ],
              "radius": 8
            }
          ]
        },
        {
          "id": "fillerBore",
          "type": "extrude",
          "profile": "fillerBoreProfile",
          "distance": 31
        },
        {
          "id": "drainBoreProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -63,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "drainBoreProfileRim",
              "centre": [
                30,
                -26
              ],
              "radius": 5
            }
          ]
        },
        {
          "id": "drainBore",
          "type": "extrude",
          "profile": "drainBoreProfile",
          "distance": 11
        },
        {
          "id": "governorBoreProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                65,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "governorBoreProfileRim",
              "centre": [
                0,
                -5
              ],
              "radius": 3
            }
          ]
        },
        {
          "id": "governorBore",
          "type": "extrude",
          "profile": "governorBoreProfile",
          "distance": 9,
          "direction": [
            -1,
            0,
            0
          ]
        },
        {
          "id": "bearingHousingProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -21,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "bearingHousingProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 23.55
            }
          ]
        },
        {
          "id": "bearingHousing",
          "type": "extrude",
          "profile": "bearingHousingProfile",
          "distance": 16
        },
        {
          "id": "shaftHoleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -36,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "shaftHoleProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 11
            }
          ]
        },
        {
          "id": "shaftHole",
          "type": "extrude",
          "profile": "shaftHoleProfile",
          "distance": 5
        },
        {
          "id": "camJournalProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -21,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "camJournalProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 7.05
            }
          ]
        },
        {
          "id": "camJournal",
          "type": "extrude",
          "profile": "camJournalProfile",
          "distance": 14
        },
        {
          "id": "hollowed",
          "type": "boolean",
          "operation": "difference",
          "body": "crankcase",
          "tools": [
            "crankCavity",
            "rodCavity",
            "camCavity",
            "gearCavity",
            "bore",
            "tappetPocket",
            "chamber",
            "window",
            "tappetBoreIn",
            "guideIn",
            "pocketIn",
            "throatIn",
            "portIn",
            "tappetBoreEx",
            "guideEx",
            "pocketEx",
            "throatEx",
            "portEx",
            "fillerBore",
            "drainBore",
            "governorBore",
            "bearingHousing",
            "shaftHole",
            "camJournal"
          ]
        },
        {
          "id": "headBoltHoles",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "deckPlate",
            "role": "end"
          },
          "at": [
            {
              "id": "rearLeft",
              "x": -28,
              "y": -28
            },
            {
              "id": "rearRight",
              "x": -28,
              "y": 28
            },
            {
              "id": "midLeft",
              "x": 14,
              "y": -31
            },
            {
              "id": "midRight",
              "x": 14,
              "y": 31
            },
            {
              "id": "frontLeft",
              "x": 54,
              "y": -30
            },
            {
              "id": "frontRight",
              "x": 54,
              "y": 30
            }
          ],
          "fastener": {
            "size": "M6",
            "fit": "tapped"
          },
          "depth": 20
        },
        {
          "id": "caseBoltHoles",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "crankcase",
            "role": "start"
          },
          "at": [
            {
              "id": "lowerBack",
              "x": -42,
              "y": 42
            },
            {
              "id": "upperBack",
              "x": -42,
              "y": -42
            },
            {
              "id": "lowerFront",
              "x": 46,
              "y": 42
            },
            {
              "id": "upperMiddle",
              "x": -5.5,
              "y": -42.85
            }
          ],
          "fastener": {
            "size": "M5",
            "fit": "tapped"
          },
          "depth": 14
        },
        {
          "id": "gearCaseBoltHoles",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "gearCase",
            "role": "start"
          },
          "at": [
            {
              "id": "east",
              "x": 88,
              "y": -42.848571
            },
            {
              "id": "northEast",
              "x": 65,
              "y": -82.685739
            },
            {
              "id": "north",
              "x": 19,
              "y": -82.685739
            },
            {
              "id": "southEast",
              "x": 65,
              "y": -3.011402
            }
          ],
          "fastener": {
            "size": "M5",
            "fit": "tapped"
          },
          "depth": 14
        },
        {
          "id": "portInStuds",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "portInPad",
            "role": "end"
          },
          "direction": [
            1,
            0,
            0
          ],
          "at": [
            {
              "id": "low",
              "x": 49.5,
              "y": 115
            },
            {
              "id": "high",
              "x": 32.5,
              "y": 131
            }
          ],
          "diameter": 4.1,
          "depth": 10
        },
        {
          "id": "portExStuds",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "portExPad",
            "role": "end"
          },
          "direction": [
            1,
            0,
            0
          ],
          "at": [
            {
              "id": "low",
              "x": 49.5,
              "y": -115
            },
            {
              "id": "high",
              "x": 32.5,
              "y": -131
            }
          ],
          "diameter": 4.1,
          "depth": 10
        },
        {
          "id": "magnetoHoles",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "crankcase",
            "role": "end",
            "filter": {
              "select": "nearest",
              "point": [
                -40.305087,
                -40,
                40.305087
              ]
            }
          },
          "direction": [
            1,
            0,
            0
          ],
          "at": [
            {
              "id": "upper",
              "x": -40.305087,
              "y": 40.305087
            },
            {
              "id": "lower",
              "x": -48.790368,
              "y": 31.819805
            }
          ],
          "diameter": 4.1,
          "depth": 10
        },
        {
          "id": "tankHoles",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "crankcase",
            "role": "side",
            "from": "crankcaseProfile.crankcaseProfileClose"
          },
          "at": [
            {
              "id": "foot0",
              "x": -48,
              "y": 24
            },
            {
              "id": "foot1",
              "x": -48,
              "y": -24
            }
          ],
          "diameter": 5.1,
          "depth": 10
        },
        {
          "id": "windowScrews",
          "type": "hole",
          "body": "crankcase",
          "on": {
            "of": "chest",
            "role": "side",
            "from": "chestProfile.chestProfile1"
          },
          "direction": [
            0,
            1,
            0
          ],
          "at": [
            {
              "id": "left",
              "x": -21.5,
              "y": 92
            },
            {
              "id": "right",
              "x": 21.5,
              "y": 92
            }
          ],
          "diameter": 4.1,
          "depth": 8
        }
      ],
      "parts": [
        {
          "id": "block",
          "name": "Block",
          "body": "crankcase",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-100"
          },
          "connectors": [
            {
              "id": "deck",
              "on": {
                "of": "deckPlate",
                "role": "end"
              }
            },
            {
              "id": "front",
              "on": {
                "of": "crankcase",
                "role": "start",
                "filter": {
                  "select": "nearest",
                  "point": [
                    -58,
                    50,
                    -58
                  ]
                }
              },
              "origin": [
                0,
                0,
                0
              ]
            },
            {
              "id": "bearing",
              "on": {
                "of": "bearingHousing",
                "role": "end"
              }
            },
            {
              "id": "filler",
              "on": {
                "of": "fillerBoss",
                "role": "start"
              },
              "origin": [
                0,
                12,
                -12
              ]
            },
            {
              "id": "drain",
              "on": {
                "of": "drainBoss",
                "role": "start"
              },
              "origin": [
                0,
                30,
                -26
              ]
            },
            {
              "id": "governor",
              "on": {
                "of": "governorBoss",
                "role": "end"
              },
              "origin": [
                0,
                0,
                -5
              ]
            },
            {
              "id": "nameplate",
              "on": {
                "of": "crankcase",
                "role": "side",
                "from": "crankcaseProfile.crankcaseProfile0"
              },
              "origin": [
                0,
                -30,
                14
              ]
            },
            {
              "id": "tank",
              "on": {
                "of": "crankcase",
                "role": "side",
                "from": "crankcaseProfile.crankcaseProfileClose"
              },
              "origin": [
                -48,
                24,
                0
              ]
            },
            {
              "id": "magneto",
              "on": {
                "of": "crankcase",
                "role": "end",
                "filter": {
                  "select": "nearest",
                  "point": [
                    -40.305087,
                    -40,
                    40.305087
                  ]
                }
              },
              "origin": [
                -40.305087,
                0,
                40.305087
              ]
            },
            {
              "id": "window",
              "on": {
                "of": "chest",
                "role": "side",
                "from": "chestProfile.chestProfile1"
              },
              "origin": [
                60,
                0,
                92
              ]
            },
            {
              "id": "valveIn",
              "on": {
                "of": "deckPlate",
                "role": "end"
              },
              "origin": [
                42,
                -14,
                0
              ]
            },
            {
              "id": "springIn",
              "on": {
                "of": "chamber",
                "role": "end"
              },
              "origin": [
                42,
                -14,
                0
              ]
            },
            {
              "id": "portIn",
              "on": {
                "of": "portInPad",
                "role": "end"
              },
              "origin": [
                41,
                0,
                123
              ]
            },
            {
              "id": "valveEx",
              "on": {
                "of": "deckPlate",
                "role": "end"
              },
              "origin": [
                42,
                14,
                0
              ]
            },
            {
              "id": "springEx",
              "on": {
                "of": "chamber",
                "role": "end"
              },
              "origin": [
                42,
                14,
                0
              ]
            },
            {
              "id": "portEx",
              "on": {
                "of": "portExPad",
                "role": "end"
              },
              "origin": [
                41,
                0,
                123
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000000f",
      "up": "z",
      "meta": {
        "name": "Cylinder head",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "plateProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 137.8
          },
          "start": [
            -36,
            -36
          ],
          "pen": [
            {
              "type": "line",
              "id": "plateProfile0",
              "to": [
                62,
                -36
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound0",
              "radius": 10
            },
            {
              "type": "line",
              "id": "plateProfile1",
              "to": [
                62,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound1",
              "radius": 10
            },
            {
              "type": "line",
              "id": "plateProfile2",
              "to": [
                -36,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound2",
              "radius": 10
            },
            {
              "type": "close",
              "id": "plateProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRoundStart",
              "radius": 10
            }
          ]
        },
        {
          "id": "plate",
          "type": "extrude",
          "profile": "plateProfile",
          "distance": 13.2
        },
        {
          "id": "plateRound",
          "type": "fillet",
          "body": "plate",
          "edges": {
            "between": [
              {
                "of": "plate",
                "role": "end"
              },
              {
                "of": "plate",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 2.5
        },
        {
          "id": "fins0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                22,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -33.6,
            150
          ],
          "pen": [
            {
              "type": "line",
              "id": "fins0Profile0",
              "to": [
                -33.6,
                151
              ]
            },
            {
              "type": "line",
              "id": "fins0Profile1",
              "to": [
                -31.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound1",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile2",
              "to": [
                -31,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound2",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile3",
              "to": [
                -29,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound3",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile4",
              "to": [
                -28.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound4",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile5",
              "to": [
                -23.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound5",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile6",
              "to": [
                -23,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound6",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile7",
              "to": [
                -21,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound7",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile8",
              "to": [
                -20.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound8",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile9",
              "to": [
                -15.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound9",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile10",
              "to": [
                -15,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound10",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile11",
              "to": [
                -13,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound11",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile12",
              "to": [
                -12.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound12",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile13",
              "to": [
                -7.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound13",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile14",
              "to": [
                -7,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound14",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile15",
              "to": [
                -5,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound15",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile16",
              "to": [
                -4.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound16",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile17",
              "to": [
                0.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound17",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile18",
              "to": [
                1,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound18",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile19",
              "to": [
                3,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound19",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins0Profile20",
              "to": [
                3.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins0ProfileRound20",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins0Profile21",
              "to": [
                5.6,
                151
              ]
            },
            {
              "type": "line",
              "id": "fins0Profile22",
              "to": [
                5.6,
                150
              ]
            },
            {
              "type": "close",
              "id": "fins0ProfileClose"
            }
          ]
        },
        {
          "id": "fins0",
          "type": "extrude",
          "profile": "fins0Profile",
          "distance": 44
        },
        {
          "id": "fins1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                22,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            29.4,
            150
          ],
          "pen": [
            {
              "type": "line",
              "id": "fins1Profile0",
              "to": [
                29.4,
                151
              ]
            },
            {
              "type": "line",
              "id": "fins1Profile1",
              "to": [
                31.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound1",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile2",
              "to": [
                32,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound2",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile3",
              "to": [
                34,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound3",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile4",
              "to": [
                34.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound4",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile5",
              "to": [
                39.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound5",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile6",
              "to": [
                40,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound6",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile7",
              "to": [
                42,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound7",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile8",
              "to": [
                42.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound8",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile9",
              "to": [
                47.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound9",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile10",
              "to": [
                48,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound10",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile11",
              "to": [
                50,
                163
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound11",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile12",
              "to": [
                50.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound12",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile13",
              "to": [
                55.4,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound13",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile14",
              "to": [
                56,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound14",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile15",
              "to": [
                58,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound15",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "fins1Profile16",
              "to": [
                58.6,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "fins1ProfileRound16",
              "radius": 1.4
            },
            {
              "type": "line",
              "id": "fins1Profile17",
              "to": [
                60.6,
                151
              ]
            },
            {
              "type": "line",
              "id": "fins1Profile18",
              "to": [
                60.6,
                150
              ]
            },
            {
              "type": "close",
              "id": "fins1ProfileClose"
            }
          ]
        },
        {
          "id": "fins1",
          "type": "extrude",
          "profile": "fins1Profile",
          "distance": 44
        },
        {
          "id": "finned",
          "type": "boolean",
          "operation": "union",
          "body": "plate",
          "tools": [
            "fins0",
            "fins1"
          ]
        },
        {
          "id": "chamberBoreProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "pen": [
            {
              "type": "circle",
              "id": "chamberBoreProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 27
            }
          ]
        },
        {
          "id": "chamberBore",
          "type": "extrude",
          "profile": "chamberBoreProfile",
          "distance": 7
        },
        {
          "id": "chamberRunProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "start": [
            0,
            -26
          ],
          "pen": [
            {
              "type": "line",
              "id": "chamberRunProfile0",
              "to": [
                42,
                -26
              ]
            },
            {
              "type": "line",
              "id": "chamberRunProfile1",
              "to": [
                42,
                26
              ]
            },
            {
              "type": "line",
              "id": "chamberRunProfile2",
              "to": [
                0,
                26
              ]
            },
            {
              "type": "close",
              "id": "chamberRunProfileClose"
            }
          ]
        },
        {
          "id": "chamberRun",
          "type": "extrude",
          "profile": "chamberRunProfile",
          "distance": 7
        },
        {
          "id": "chamberInProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "pen": [
            {
              "type": "circle",
              "id": "chamberInProfileRim",
              "centre": [
                42,
                -14
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "chamberIn",
          "type": "extrude",
          "profile": "chamberInProfile",
          "distance": 7
        },
        {
          "id": "chamberExProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "pen": [
            {
              "type": "circle",
              "id": "chamberExProfileRim",
              "centre": [
                42,
                14
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "chamberEx",
          "type": "extrude",
          "profile": "chamberExProfile",
          "distance": 7
        },
        {
          "id": "chambered",
          "type": "boolean",
          "operation": "difference",
          "body": "plate",
          "tools": [
            "chamberBore",
            "chamberRun",
            "chamberIn",
            "chamberEx"
          ]
        },
        {
          "id": "plugHole",
          "type": "hole",
          "body": "plate",
          "on": {
            "of": "plate",
            "role": "end"
          },
          "at": [
            {
              "id": "plug",
              "x": 18,
              "y": 0
            }
          ],
          "diameter": 14
        },
        {
          "id": "boltHoles",
          "type": "hole",
          "body": "plate",
          "on": {
            "of": "plate",
            "role": "end"
          },
          "at": [
            {
              "id": "rearLeft",
              "x": -28,
              "y": -28
            },
            {
              "id": "rearRight",
              "x": -28,
              "y": 28
            },
            {
              "id": "midLeft",
              "x": 14,
              "y": -31
            },
            {
              "id": "midRight",
              "x": 14,
              "y": 31
            },
            {
              "id": "frontLeft",
              "x": 54,
              "y": -30
            },
            {
              "id": "frontRight",
              "x": 54,
              "y": 30
            }
          ],
          "fastener": {
            "size": "M6",
            "fit": "normal"
          }
        }
      ],
      "parts": [
        {
          "id": "head",
          "name": "Cylinder head",
          "body": "plate",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-140"
          },
          "connectors": [
            {
              "id": "gasket",
              "on": {
                "of": "plate",
                "role": "start"
              }
            },
            {
              "id": "bolts",
              "on": {
                "of": "plate",
                "role": "end"
              },
              "axis": {
                "of": "boltHoles",
                "role": "wall"
              }
            },
            {
              "id": "plug",
              "on": {
                "of": "plate",
                "role": "end"
              },
              "axis": {
                "of": "plugHole",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000010",
      "up": "z",
      "meta": {
        "name": "Gear cover",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "plateProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                58,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -58,
            50
          ],
          "pen": [
            {
              "type": "line",
              "id": "plateProfile0",
              "to": [
                -58,
                -40
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound0",
              "radius": 14
            },
            {
              "type": "line",
              "id": "plateProfile1",
              "to": [
                -40,
                -58
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound1",
              "radius": 14
            },
            {
              "type": "line",
              "id": "plateProfile2",
              "to": [
                40,
                -58
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound2",
              "radius": 14
            },
            {
              "type": "line",
              "id": "plateProfile3",
              "to": [
                58,
                -40
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound3",
              "radius": 14
            },
            {
              "type": "line",
              "id": "plateProfile4",
              "to": [
                58,
                50
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound4",
              "radius": 6
            },
            {
              "type": "close",
              "id": "plateProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "plate",
          "type": "extrude",
          "profile": "plateProfile",
          "distance": 7.2
        },
        {
          "id": "plateRound",
          "type": "fillet",
          "body": "plate",
          "edges": {
            "between": [
              {
                "of": "plate",
                "role": "start"
              },
              {
                "of": "plate",
                "role": "side"
              }
            ],
            "count": 12
          },
          "radius": 3
        },
        {
          "id": "roundProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                58,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "roundProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 50
            }
          ]
        },
        {
          "id": "round",
          "type": "extrude",
          "profile": "roundProfile",
          "distance": 7.2
        },
        {
          "id": "roundRound",
          "type": "fillet",
          "body": "round",
          "edges": {
            "between": [
              {
                "of": "round",
                "role": "start"
              },
              {
                "of": "round",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1.2
        },
        {
          "id": "domeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                42,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            57,
            42.848571
          ],
          "pen": [
            {
              "type": "line",
              "id": "domeProfile0",
              "to": [
                57,
                85.848571
              ]
            },
            {
              "type": "line",
              "id": "domeProfile1",
              "to": [
                58,
                85.848571
              ]
            },
            {
              "type": "line",
              "id": "domeProfile2",
              "to": [
                58,
                82.848571
              ]
            },
            {
              "type": "filletCorner",
              "id": "domeProfileRound2",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "domeProfile3",
              "to": [
                62,
                77.848571
              ]
            },
            {
              "type": "filletCorner",
              "id": "domeProfileRound3",
              "radius": 4
            },
            {
              "type": "line",
              "id": "domeProfile4",
              "to": [
                62,
                42.848571
              ]
            },
            {
              "type": "close",
              "id": "domeProfileClose"
            }
          ]
        },
        {
          "id": "dome",
          "type": "revolve",
          "profile": "domeProfile",
          "axis": {
            "origin": [
              42,
              0,
              42.848571
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "bossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            50.8,
            0
          ],
          "pen": [
            {
              "type": "line",
              "id": "bossProfile0",
              "to": [
                50.8,
                37
              ]
            },
            {
              "type": "line",
              "id": "bossProfile1",
              "to": [
                58,
                37
              ]
            },
            {
              "type": "line",
              "id": "bossProfile2",
              "to": [
                58,
                31
              ]
            },
            {
              "type": "filletCorner",
              "id": "bossProfileRound2",
              "radius": 3
            },
            {
              "type": "line",
              "id": "bossProfile3",
              "to": [
                70,
                29
              ]
            },
            {
              "type": "filletCorner",
              "id": "bossProfileRound3",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "bossProfile4",
              "to": [
                70,
                0
              ]
            },
            {
              "type": "close",
              "id": "bossProfileClose"
            }
          ]
        },
        {
          "id": "boss",
          "type": "revolve",
          "profile": "bossProfile",
          "axis": {
            "origin": [
              0,
              0,
              0
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "camBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                69,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "camBossProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 12
            }
          ]
        },
        {
          "id": "camBoss",
          "type": "extrude",
          "profile": "camBossProfile",
          "distance": 18.2
        },
        {
          "id": "camBossRound",
          "type": "fillet",
          "body": "camBoss",
          "edges": {
            "between": [
              {
                "of": "camBoss",
                "role": "start"
              },
              {
                "of": "camBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1.5
        },
        {
          "id": "rib0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -26.951019,
            13.328262
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib0Profile0",
              "to": [
                -48.200248,
                22.129981
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib0ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib0Profile1",
              "to": [
                -49.730982,
                18.434463
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib0ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib0Profile2",
              "to": [
                -28.481753,
                9.632744
              ]
            },
            {
              "type": "close",
              "id": "rib0ProfileClose"
            }
          ]
        },
        {
          "id": "rib0",
          "type": "extrude",
          "profile": "rib0Profile",
          "distance": 4.5
        },
        {
          "id": "rib0Round",
          "type": "fillet",
          "body": "rib0",
          "edges": {
            "between": [
              {
                "of": "rib0",
                "role": "start"
              },
              {
                "of": "rib0",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "rib1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -30,
            2
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib1Profile0",
              "to": [
                -53,
                2
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib1ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib1Profile1",
              "to": [
                -53,
                -2
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib1ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib1Profile2",
              "to": [
                -30,
                -2
              ]
            },
            {
              "type": "close",
              "id": "rib1ProfileClose"
            }
          ]
        },
        {
          "id": "rib1",
          "type": "extrude",
          "profile": "rib1Profile",
          "distance": 4.5
        },
        {
          "id": "rib1Round",
          "type": "fillet",
          "body": "rib1",
          "edges": {
            "between": [
              {
                "of": "rib1",
                "role": "start"
              },
              {
                "of": "rib1",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "rib2Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -28.481753,
            -9.632744
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib2Profile0",
              "to": [
                -49.730982,
                -18.434463
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib2ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib2Profile1",
              "to": [
                -48.200248,
                -22.129981
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib2ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib2Profile2",
              "to": [
                -26.951019,
                -13.328262
              ]
            },
            {
              "type": "close",
              "id": "rib2ProfileClose"
            }
          ]
        },
        {
          "id": "rib2",
          "type": "extrude",
          "profile": "rib2Profile",
          "distance": 4.5
        },
        {
          "id": "rib2Round",
          "type": "fillet",
          "body": "rib2",
          "edges": {
            "between": [
              {
                "of": "rib2",
                "role": "start"
              },
              {
                "of": "rib2",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "rib3Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -13.328262,
            -26.951019
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib3Profile0",
              "to": [
                -22.129981,
                -48.200248
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib3ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib3Profile1",
              "to": [
                -18.434463,
                -49.730982
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib3ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib3Profile2",
              "to": [
                -9.632744,
                -28.481753
              ]
            },
            {
              "type": "close",
              "id": "rib3ProfileClose"
            }
          ]
        },
        {
          "id": "rib3",
          "type": "extrude",
          "profile": "rib3Profile",
          "distance": 4.5
        },
        {
          "id": "rib3Round",
          "type": "fillet",
          "body": "rib3",
          "edges": {
            "between": [
              {
                "of": "rib3",
                "role": "start"
              },
              {
                "of": "rib3",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "rib4Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -2,
            -30
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib4Profile0",
              "to": [
                -2,
                -53
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib4ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib4Profile1",
              "to": [
                2,
                -53
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib4ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib4Profile2",
              "to": [
                2,
                -30
              ]
            },
            {
              "type": "close",
              "id": "rib4ProfileClose"
            }
          ]
        },
        {
          "id": "rib4",
          "type": "extrude",
          "profile": "rib4Profile",
          "distance": 4.5
        },
        {
          "id": "rib4Round",
          "type": "fillet",
          "body": "rib4",
          "edges": {
            "between": [
              {
                "of": "rib4",
                "role": "start"
              },
              {
                "of": "rib4",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "rib5Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            9.632744,
            -28.481753
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib5Profile0",
              "to": [
                18.434463,
                -49.730982
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib5ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib5Profile1",
              "to": [
                22.129981,
                -48.200248
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib5ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib5Profile2",
              "to": [
                13.328262,
                -26.951019
              ]
            },
            {
              "type": "close",
              "id": "rib5ProfileClose"
            }
          ]
        },
        {
          "id": "rib5",
          "type": "extrude",
          "profile": "rib5Profile",
          "distance": 4.5
        },
        {
          "id": "rib5Round",
          "type": "fillet",
          "body": "rib5",
          "edges": {
            "between": [
              {
                "of": "rib5",
                "role": "start"
              },
              {
                "of": "rib5",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "rib6Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            26.951019,
            -13.328262
          ],
          "pen": [
            {
              "type": "line",
              "id": "rib6Profile0",
              "to": [
                48.200248,
                -22.129981
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib6ProfileRound0",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib6Profile1",
              "to": [
                49.730982,
                -18.434463
              ]
            },
            {
              "type": "filletCorner",
              "id": "rib6ProfileRound1",
              "radius": 1.9
            },
            {
              "type": "line",
              "id": "rib6Profile2",
              "to": [
                28.481753,
                -9.632744
              ]
            },
            {
              "type": "close",
              "id": "rib6ProfileClose"
            }
          ]
        },
        {
          "id": "rib6",
          "type": "extrude",
          "profile": "rib6Profile",
          "distance": 4.5
        },
        {
          "id": "rib6Round",
          "type": "fillet",
          "body": "rib6",
          "edges": {
            "between": [
              {
                "of": "rib6",
                "role": "start"
              },
              {
                "of": "rib6",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 1.2
        },
        {
          "id": "cast",
          "type": "boolean",
          "operation": "union",
          "body": "plate",
          "tools": [
            "round",
            "dome",
            "boss",
            "camBoss",
            "rib0",
            "rib1",
            "rib2",
            "rib3",
            "rib4",
            "rib5",
            "rib6"
          ]
        },
        {
          "id": "housingProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                49,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "housingProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 23.55
            }
          ]
        },
        {
          "id": "housing",
          "type": "extrude",
          "profile": "housingProfile",
          "distance": 17,
          "direction": [
            0,
            1,
            0
          ]
        },
        {
          "id": "shaftHoleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                65,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "shaftHoleProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 10.975
            }
          ]
        },
        {
          "id": "shaftHole",
          "type": "extrude",
          "profile": "shaftHoleProfile",
          "distance": 8,
          "direction": [
            0,
            1,
            0
          ]
        },
        {
          "id": "camJournalProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                49,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "camJournalProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 7.05
            }
          ]
        },
        {
          "id": "camJournal",
          "type": "extrude",
          "profile": "camJournalProfile",
          "distance": 12,
          "direction": [
            0,
            1,
            0
          ]
        },
        {
          "id": "bored",
          "type": "boolean",
          "operation": "difference",
          "body": "plate",
          "tools": [
            "housing",
            "shaftHole",
            "camJournal"
          ]
        },
        {
          "id": "plateBolts",
          "type": "hole",
          "body": "plate",
          "on": {
            "of": "plate",
            "role": "start"
          },
          "at": [
            {
              "id": "lowerBack",
              "x": -42,
              "y": 42
            },
            {
              "id": "upperBack",
              "x": -42,
              "y": -42
            },
            {
              "id": "lowerFront",
              "x": 46,
              "y": 42
            },
            {
              "id": "upperMiddle",
              "x": -5.5,
              "y": -42.85
            }
          ],
          "fastener": {
            "size": "M5",
            "fit": "normal"
          }
        },
        {
          "id": "roundBolts",
          "type": "hole",
          "body": "plate",
          "on": {
            "of": "round",
            "role": "start"
          },
          "at": [
            {
              "id": "east",
              "x": 88,
              "y": -42.848571
            },
            {
              "id": "northEast",
              "x": 65,
              "y": -82.685739
            },
            {
              "id": "north",
              "x": 19,
              "y": -82.685739
            },
            {
              "id": "southEast",
              "x": 65,
              "y": -3.011402
            }
          ],
          "fastener": {
            "size": "M5",
            "fit": "normal"
          }
        }
      ],
      "parts": [
        {
          "id": "cover",
          "name": "Gear cover",
          "body": "plate",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-141"
          },
          "connectors": [
            {
              "id": "inside",
              "on": {
                "of": "plate",
                "role": "end"
              }
            },
            {
              "id": "bearing",
              "on": {
                "of": "housing",
                "role": "end"
              }
            },
            {
              "id": "plateBolts",
              "on": {
                "of": "plate",
                "role": "start"
              },
              "axis": {
                "of": "plateBolts",
                "role": "wall"
              }
            },
            {
              "id": "roundBolts",
              "on": {
                "of": "round",
                "role": "start"
              },
              "axis": {
                "of": "roundBolts",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000003",
      "up": "z",
      "meta": {
        "name": "Crankshaft",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "pinProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                9,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "pinProfileRim",
              "centre": [
                0,
                24
              ],
              "radius": 9.975
            }
          ]
        },
        {
          "id": "pin",
          "type": "extrude",
          "profile": "pinProfile",
          "distance": 18
        },
        {
          "id": "webAProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -9,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            36,
            0
          ],
          "pen": [
            {
              "type": "threePointArc",
              "id": "webAProfileWeight",
              "through": [
                0,
                -36
              ],
              "to": [
                -36,
                0
              ]
            },
            {
              "type": "filletCorner",
              "id": "webAProfileWeightRoundBack",
              "radius": 5
            },
            {
              "type": "line",
              "id": "webAProfileBack",
              "to": [
                -15,
                24
              ]
            },
            {
              "type": "filletCorner",
              "id": "webAProfileLobeRoundBack",
              "radius": 3
            },
            {
              "type": "threePointArc",
              "id": "webAProfileLobe",
              "through": [
                0,
                39
              ],
              "to": [
                15,
                24
              ]
            },
            {
              "type": "filletCorner",
              "id": "webAProfileLobeRoundFront",
              "radius": 3
            },
            {
              "type": "close",
              "id": "webAProfileFront"
            },
            {
              "type": "filletCorner",
              "id": "webAProfileWeightRoundFront",
              "radius": 5
            }
          ]
        },
        {
          "id": "webA",
          "type": "extrude",
          "profile": "webAProfile",
          "distance": 10
        },
        {
          "id": "webARoundInner",
          "type": "fillet",
          "body": "webA",
          "edges": {
            "between": [
              {
                "of": "webA",
                "role": "start"
              },
              {
                "of": "webA",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 1.5
        },
        {
          "id": "webARoundOuter",
          "type": "fillet",
          "body": "webA",
          "edges": {
            "between": [
              {
                "of": "webA",
                "role": "end"
              },
              {
                "of": "webA",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 1.5
        },
        {
          "id": "webBProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                19,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            36,
            0
          ],
          "pen": [
            {
              "type": "threePointArc",
              "id": "webBProfileWeight",
              "through": [
                0,
                -36
              ],
              "to": [
                -36,
                0
              ]
            },
            {
              "type": "filletCorner",
              "id": "webBProfileWeightRoundBack",
              "radius": 5
            },
            {
              "type": "line",
              "id": "webBProfileBack",
              "to": [
                -15,
                24
              ]
            },
            {
              "type": "filletCorner",
              "id": "webBProfileLobeRoundBack",
              "radius": 3
            },
            {
              "type": "threePointArc",
              "id": "webBProfileLobe",
              "through": [
                0,
                39
              ],
              "to": [
                15,
                24
              ]
            },
            {
              "type": "filletCorner",
              "id": "webBProfileLobeRoundFront",
              "radius": 3
            },
            {
              "type": "close",
              "id": "webBProfileFront"
            },
            {
              "type": "filletCorner",
              "id": "webBProfileWeightRoundFront",
              "radius": 5
            }
          ]
        },
        {
          "id": "webB",
          "type": "extrude",
          "profile": "webBProfile",
          "distance": 10
        },
        {
          "id": "webBRoundOuter",
          "type": "fillet",
          "body": "webB",
          "edges": {
            "between": [
              {
                "of": "webB",
                "role": "start"
              },
              {
                "of": "webB",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 1.5
        },
        {
          "id": "webBRoundInner",
          "type": "fillet",
          "body": "webB",
          "edges": {
            "between": [
              {
                "of": "webB",
                "role": "end"
              },
              {
                "of": "webB",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 1.5
        },
        {
          "id": "journalAProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -19,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "journalAProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 9.975
            }
          ]
        },
        {
          "id": "journalA",
          "type": "extrude",
          "profile": "journalAProfile",
          "distance": 27
        },
        {
          "id": "shoulderAProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -19,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "shoulderAProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "shoulderA",
          "type": "extrude",
          "profile": "shoulderAProfile",
          "distance": 3.95
        },
        {
          "id": "tailProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -46,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "tailProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 9
            }
          ]
        },
        {
          "id": "tail",
          "type": "extrude",
          "profile": "tailProfile",
          "distance": 18
        },
        {
          "id": "tailEndRound",
          "type": "fillet",
          "body": "tail",
          "edges": {
            "between": [
              {
                "of": "tail",
                "role": "end"
              },
              {
                "of": "tail",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1
        },
        {
          "id": "journalBProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                70,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "journalBProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 9.975
            }
          ]
        },
        {
          "id": "journalB",
          "type": "extrude",
          "profile": "journalBProfile",
          "distance": 51
        },
        {
          "id": "driveEndRound",
          "type": "fillet",
          "body": "journalB",
          "edges": {
            "between": [
              {
                "of": "journalB",
                "role": "start"
              },
              {
                "of": "journalB",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1
        },
        {
          "id": "collarProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                35.95,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "collarProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "collar",
          "type": "extrude",
          "profile": "collarProfile",
          "distance": 4
        },
        {
          "id": "crankshaft",
          "type": "boolean",
          "operation": "union",
          "body": "pin",
          "tools": [
            "webA",
            "webB",
            "journalA",
            "shoulderA",
            "tail",
            "journalB",
            "collar"
          ]
        },
        {
          "id": "pinRoundA",
          "type": "fillet",
          "body": "pin",
          "edges": {
            "between": [
              {
                "of": "pin",
                "role": "side"
              },
              {
                "of": "webA",
                "role": "start"
              }
            ],
            "count": 1
          },
          "radius": 1.2
        },
        {
          "id": "pinRoundB",
          "type": "fillet",
          "body": "pin",
          "edges": {
            "between": [
              {
                "of": "pin",
                "role": "side"
              },
              {
                "of": "webB",
                "role": "end"
              }
            ],
            "count": 1
          },
          "radius": 1.2
        },
        {
          "id": "shoulderRoundA",
          "type": "fillet",
          "body": "pin",
          "edges": {
            "between": [
              {
                "of": "shoulderA",
                "role": "side"
              },
              {
                "of": "webA",
                "role": "end"
              }
            ],
            "count": 1
          },
          "radius": 1.2
        },
        {
          "id": "oilwayProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 34.975
          },
          "pen": [
            {
              "type": "circle",
              "id": "oilwayProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 1.6
            }
          ]
        },
        {
          "id": "oilway",
          "type": "extrude",
          "profile": "oilwayProfile",
          "distance": 21.95,
          "direction": [
            0,
            0,
            -1
          ]
        },
        {
          "id": "balanceA0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -15,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "balanceA0ProfileRim",
              "centre": [
                -13,
                -27
              ],
              "radius": 3.2
            }
          ]
        },
        {
          "id": "balanceA0",
          "type": "extrude",
          "profile": "balanceA0Profile",
          "distance": 5
        },
        {
          "id": "balanceA1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -15,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "balanceA1ProfileRim",
              "centre": [
                0,
                -30
              ],
              "radius": 3.2
            }
          ]
        },
        {
          "id": "balanceA1",
          "type": "extrude",
          "profile": "balanceA1Profile",
          "distance": 5
        },
        {
          "id": "balanceA2Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -15,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "balanceA2ProfileRim",
              "centre": [
                13,
                -27
              ],
              "radius": 3.2
            }
          ]
        },
        {
          "id": "balanceA2",
          "type": "extrude",
          "profile": "balanceA2Profile",
          "distance": 5
        },
        {
          "id": "balanceB0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                15,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "balanceB0ProfileRim",
              "centre": [
                -13,
                27
              ],
              "radius": 3.2
            }
          ]
        },
        {
          "id": "balanceB0",
          "type": "extrude",
          "profile": "balanceB0Profile",
          "distance": 5
        },
        {
          "id": "balanceB1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                15,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "balanceB1ProfileRim",
              "centre": [
                0,
                30
              ],
              "radius": 3.2
            }
          ]
        },
        {
          "id": "balanceB1",
          "type": "extrude",
          "profile": "balanceB1Profile",
          "distance": 5
        },
        {
          "id": "balanceB2Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                15,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "balanceB2ProfileRim",
              "centre": [
                13,
                27
              ],
              "radius": 3.2
            }
          ]
        },
        {
          "id": "balanceB2",
          "type": "extrude",
          "profile": "balanceB2Profile",
          "distance": 5
        },
        {
          "id": "drilled",
          "type": "boolean",
          "operation": "difference",
          "body": "pin",
          "tools": [
            "oilway",
            "balanceA0",
            "balanceA1",
            "balanceA2",
            "balanceB0",
            "balanceB1",
            "balanceB2"
          ]
        },
        {
          "id": "gearKeyway",
          "type": "keyway",
          "body": "pin",
          "on": {
            "of": "journalB",
            "role": "side",
            "filter": {
              "select": "nearest",
              "point": [
                0,
                70,
                9.975
              ]
            },
            "count": 1
          },
          "at": 1.05,
          "length": 8,
          "angle": -90
        },
        {
          "id": "flywheelKeyway",
          "type": "keyway",
          "body": "pin",
          "on": {
            "of": "tail",
            "role": "side"
          },
          "at": 3,
          "length": 10,
          "angle": -90
        }
      ],
      "parts": [
        {
          "id": "crankshaft",
          "name": "Crankshaft",
          "body": "pin",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-101"
          },
          "connectors": [
            {
              "id": "drive",
              "on": {
                "of": "journalB",
                "role": "start"
              }
            },
            {
              "id": "pin",
              "on": {
                "of": "webA",
                "role": "start"
              },
              "origin": [
                0,
                0,
                24
              ]
            },
            {
              "id": "gearSeat",
              "on": {
                "of": "collar",
                "role": "start"
              }
            },
            {
              "id": "flywheelSeat",
              "on": {
                "of": "journalA",
                "role": "end"
              }
            },
            {
              "id": "gearKey",
              "on": {
                "of": "gearKeyway",
                "role": "keyway",
                "filter": {
                  "select": "facing",
                  "direction": [
                    0,
                    0,
                    1
                  ],
                  "angle": 1
                },
                "count": 1
              },
              "origin": [
                0,
                41,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            },
            {
              "id": "flywheelKey",
              "on": {
                "of": "flywheelKeyway",
                "role": "keyway",
                "filter": {
                  "select": "facing",
                  "direction": [
                    0,
                    0,
                    1
                  ],
                  "angle": 1
                },
                "count": 1
              },
              "origin": [
                0,
                -55,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000008",
      "up": "z",
      "meta": {
        "name": "Crank gear",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "gearProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                46,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "gear",
                  "id": "teeth",
                  "centre": [
                    0,
                    0
                  ],
                  "module": 2,
                  "teeth": 20,
                  "backlash": 0.1,
                  "rotation": 45.572996
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "bore",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 10
                }
              ]
            }
          ]
        },
        {
          "id": "gear",
          "type": "extrude",
          "profile": "gearProfile",
          "distance": 10
        },
        {
          "id": "keywayProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                47,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -3.05,
            0
          ],
          "pen": [
            {
              "type": "line",
              "id": "keywayProfile0",
              "to": [
                3.05,
                0
              ]
            },
            {
              "type": "line",
              "id": "keywayProfile1",
              "to": [
                3.05,
                12.575
              ]
            },
            {
              "type": "line",
              "id": "keywayProfile2",
              "to": [
                -3.05,
                12.575
              ]
            },
            {
              "type": "close",
              "id": "keywayProfileClose"
            }
          ]
        },
        {
          "id": "keyway",
          "type": "extrude",
          "profile": "keywayProfile",
          "distance": 12
        },
        {
          "id": "keyed",
          "type": "boolean",
          "operation": "difference",
          "body": "gear",
          "tools": [
            "keyway"
          ]
        }
      ],
      "parts": [
        {
          "id": "crankGear",
          "name": "Crank gear",
          "body": "gear",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-111 z20 m2"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "gear",
                "role": "end"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000000e",
      "up": "z",
      "meta": {
        "name": "Flywheel fan",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "wheelProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            9.05,
            -46.05
          ],
          "pen": [
            {
              "type": "line",
              "id": "wheelProfile0",
              "to": [
                17,
                -46.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound0",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "wheelProfile1",
              "to": [
                17,
                -47.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound1",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "wheelProfile2",
              "to": [
                60,
                -47.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound2",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "wheelProfile3",
              "to": [
                60,
                -46.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound3",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "wheelProfile4",
              "to": [
                68,
                -46.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound4",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "wheelProfile5",
              "to": [
                68,
                -60.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound5",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "wheelProfile6",
              "to": [
                63,
                -60.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound6",
              "radius": 1
            },
            {
              "type": "line",
              "id": "wheelProfile7",
              "to": [
                60.5,
                -54.05
              ]
            },
            {
              "type": "line",
              "id": "wheelProfile8",
              "to": [
                57,
                -53.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound8",
              "radius": 3
            },
            {
              "type": "line",
              "id": "wheelProfile9",
              "to": [
                20,
                -53.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound9",
              "radius": 3
            },
            {
              "type": "line",
              "id": "wheelProfile10",
              "to": [
                17,
                -56.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound10",
              "radius": 1
            },
            {
              "type": "line",
              "id": "wheelProfile11",
              "to": [
                17,
                -62.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "wheelProfileRound11",
              "radius": 1
            },
            {
              "type": "line",
              "id": "wheelProfile12",
              "to": [
                10.05,
                -62.05
              ]
            },
            {
              "type": "line",
              "id": "wheelProfile13",
              "to": [
                9.05,
                -61.05
              ]
            },
            {
              "type": "close",
              "id": "wheelProfileClose"
            }
          ]
        },
        {
          "id": "wheel",
          "type": "revolve",
          "profile": "wheelProfile",
          "axis": {
            "origin": [
              0,
              0,
              0
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "vaneProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -53.05,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            22,
            1.3
          ],
          "pen": [
            {
              "type": "threePointArc",
              "id": "vaneLeading",
              "through": [
                38.98732,
                -4.013817
              ],
              "to": [
                48.93139,
                -27.504291
              ]
            },
            {
              "type": "filletCorner",
              "id": "vaneTipLead",
              "radius": 1.1
            },
            {
              "type": "line",
              "id": "vaneTip",
              "to": [
                46.331404,
                -27.495709
              ]
            },
            {
              "type": "filletCorner",
              "id": "vaneTipTrail",
              "radius": 1.1
            },
            {
              "type": "threePointArc",
              "id": "vaneTrailing",
              "through": [
                37.353934,
                -6.036699
              ],
              "to": [
                22,
                -1.3
              ]
            },
            {
              "type": "filletCorner",
              "id": "vaneRootTrail",
              "radius": 1.1
            },
            {
              "type": "close",
              "id": "vaneRoot"
            },
            {
              "type": "filletCorner",
              "id": "vaneRootLead",
              "radius": 1.1
            }
          ]
        },
        {
          "id": "vane",
          "type": "extrude",
          "profile": "vaneProfile",
          "distance": 6
        },
        {
          "id": "vanes",
          "type": "polarPattern",
          "body": "vane",
          "axis": {
            "origin": [
              0,
              0,
              0
            ],
            "direction": [
              0,
              1,
              0
            ]
          },
          "count": 16
        },
        {
          "id": "fan",
          "type": "boolean",
          "operation": "union",
          "body": "wheel",
          "tools": [
            "vane"
          ]
        },
        {
          "id": "keywayProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -45.05,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -3.05,
            0
          ],
          "pen": [
            {
              "type": "line",
              "id": "keywayProfile0",
              "to": [
                3.05,
                0
              ]
            },
            {
              "type": "line",
              "id": "keywayProfile1",
              "to": [
                3.05,
                11.6
              ]
            },
            {
              "type": "line",
              "id": "keywayProfile2",
              "to": [
                -3.05,
                11.6
              ]
            },
            {
              "type": "close",
              "id": "keywayProfileClose"
            }
          ]
        },
        {
          "id": "keyway",
          "type": "extrude",
          "profile": "keywayProfile",
          "distance": 18
        },
        {
          "id": "magnetPocketProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -47.05,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14.999158,
            60.158335
          ],
          "pen": [
            {
              "type": "line",
              "id": "magnetPocketProfileLead",
              "to": [
                16.934533,
                67.920701
              ]
            },
            {
              "type": "threePointArc",
              "id": "magnetPocketProfileOuter",
              "through": [
                0,
                70
              ],
              "to": [
                -16.934533,
                67.920701
              ]
            },
            {
              "type": "line",
              "id": "magnetPocketProfileTrail",
              "to": [
                -14.999158,
                60.158335
              ]
            },
            {
              "type": "threePointArc",
              "id": "magnetPocketProfileInner",
              "through": [
                0,
                62
              ],
              "to": [
                14.999158,
                60.158335
              ]
            }
          ]
        },
        {
          "id": "magnetPocket",
          "type": "extrude",
          "profile": "magnetPocketProfile",
          "distance": 12
        },
        {
          "id": "keyed",
          "type": "boolean",
          "operation": "difference",
          "body": "wheel",
          "tools": [
            "keyway",
            "magnetPocket"
          ]
        },
        {
          "id": "starterHoles",
          "type": "hole",
          "body": "wheel",
          "on": {
            "of": "wheel",
            "role": "side",
            "from": "wheelProfile.wheelProfile12"
          },
          "at": [
            {
              "id": "starter0",
              "x": 11.25833,
              "y": 6.5
            },
            {
              "id": "starter1",
              "x": -11.25833,
              "y": 6.5
            },
            {
              "id": "starter2",
              "x": 0,
              "y": -13
            }
          ],
          "diameter": 4.1,
          "depth": 8
        }
      ],
      "parts": [
        {
          "id": "flywheel",
          "name": "Flywheel fan",
          "body": "wheel",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-130"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "wheel",
                "role": "side",
                "from": "wheelProfile.wheelProfile0"
              }
            },
            {
              "id": "starter",
              "on": {
                "of": "wheel",
                "role": "side",
                "from": "wheelProfile.wheelProfile12"
              }
            },
            {
              "id": "magnet",
              "on": {
                "of": "magnetPocket",
                "role": "start"
              },
              "origin": [
                0,
                0,
                62
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000004",
      "up": "z",
      "meta": {
        "name": "Connecting rod",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "bigEndProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            20.5,
            24
          ],
          "pen": [
            {
              "type": "line",
              "id": "outerRight",
              "to": [
                20.5,
                38.097872
              ]
            },
            {
              "type": "filletCorner",
              "id": "shoulderRoundRight",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "shoulderRight",
              "to": [
                9.5,
                38.097872
              ]
            },
            {
              "type": "filletCorner",
              "id": "crownRoundRight",
              "radius": 1.5
            },
            {
              "type": "threePointArc",
              "id": "crown",
              "through": [
                0,
                41
              ],
              "to": [
                -9.5,
                38.097872
              ]
            },
            {
              "type": "filletCorner",
              "id": "crownRoundLeft",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "shoulderLeft",
              "to": [
                -20.5,
                38.097872
              ]
            },
            {
              "type": "filletCorner",
              "id": "shoulderRoundLeft",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "outerLeft",
              "to": [
                -20.5,
                24
              ]
            },
            {
              "type": "line",
              "id": "partLeft",
              "to": [
                -10,
                24
              ]
            },
            {
              "type": "threePointArc",
              "id": "bore",
              "through": [
                0,
                34
              ],
              "to": [
                10,
                24
              ]
            },
            {
              "type": "close",
              "id": "partRight"
            }
          ]
        },
        {
          "id": "bigEnd",
          "type": "extrude",
          "profile": "bigEndProfile",
          "distance": 16
        },
        {
          "id": "beamProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                6,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -14,
            35
          ],
          "pen": [
            {
              "type": "line",
              "id": "beamProfile0",
              "to": [
                14,
                35
              ]
            },
            {
              "type": "line",
              "id": "beamProfile1",
              "to": [
                9,
                44
              ]
            },
            {
              "type": "filletCorner",
              "id": "beamProfileRound1",
              "radius": 7
            },
            {
              "type": "line",
              "id": "beamProfile2",
              "to": [
                6,
                98
              ]
            },
            {
              "type": "filletCorner",
              "id": "beamProfileRound2",
              "radius": 4
            },
            {
              "type": "line",
              "id": "beamProfile3",
              "to": [
                7,
                107
              ]
            },
            {
              "type": "line",
              "id": "beamProfile4",
              "to": [
                -7,
                107
              ]
            },
            {
              "type": "line",
              "id": "beamProfile5",
              "to": [
                -6,
                98
              ]
            },
            {
              "type": "filletCorner",
              "id": "beamProfileRound5",
              "radius": 4
            },
            {
              "type": "line",
              "id": "beamProfile6",
              "to": [
                -9,
                44
              ]
            },
            {
              "type": "filletCorner",
              "id": "beamProfileRound6",
              "radius": 7
            },
            {
              "type": "close",
              "id": "beamProfileClose"
            }
          ]
        },
        {
          "id": "beam",
          "type": "extrude",
          "profile": "beamProfile",
          "distance": 12
        },
        {
          "id": "smallEndProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "smallEndProfileOuter",
                  "centre": [
                    0,
                    114
                  ],
                  "radius": 11
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "smallEndProfileInner",
                  "centre": [
                    0,
                    114
                  ],
                  "radius": 6.05
                }
              ]
            }
          ]
        },
        {
          "id": "smallEnd",
          "type": "extrude",
          "profile": "smallEndProfile",
          "distance": 16
        },
        {
          "id": "rod",
          "type": "boolean",
          "operation": "union",
          "body": "bigEnd",
          "tools": [
            "beam",
            "smallEnd"
          ]
        },
        {
          "id": "fluteFrontProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                7,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -6,
            45
          ],
          "pen": [
            {
              "type": "line",
              "id": "fluteFrontProfile0",
              "to": [
                6,
                45
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteFrontProfileRound0",
              "radius": 5.4
            },
            {
              "type": "line",
              "id": "fluteFrontProfile1",
              "to": [
                3.6,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteFrontProfileRound1",
              "radius": 3
            },
            {
              "type": "line",
              "id": "fluteFrontProfile2",
              "to": [
                -3.6,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteFrontProfileRound2",
              "radius": 3
            },
            {
              "type": "close",
              "id": "fluteFrontProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "fluteFrontProfileRoundStart",
              "radius": 5.4
            }
          ]
        },
        {
          "id": "fluteFront",
          "type": "extrude",
          "profile": "fluteFrontProfile",
          "distance": 3
        },
        {
          "id": "fluteBackProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -4,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -6,
            45
          ],
          "pen": [
            {
              "type": "line",
              "id": "fluteBackProfile0",
              "to": [
                6,
                45
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteBackProfileRound0",
              "radius": 5.4
            },
            {
              "type": "line",
              "id": "fluteBackProfile1",
              "to": [
                3.6,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteBackProfileRound1",
              "radius": 3
            },
            {
              "type": "line",
              "id": "fluteBackProfile2",
              "to": [
                -3.6,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteBackProfileRound2",
              "radius": 3
            },
            {
              "type": "close",
              "id": "fluteBackProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "fluteBackProfileRoundStart",
              "radius": 5.4
            }
          ]
        },
        {
          "id": "fluteBack",
          "type": "extrude",
          "profile": "fluteBackProfile",
          "distance": 3
        },
        {
          "id": "fluted",
          "type": "boolean",
          "operation": "difference",
          "body": "bigEnd",
          "tools": [
            "fluteFront",
            "fluteBack"
          ]
        },
        {
          "id": "oilHoleProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 126
          },
          "pen": [
            {
              "type": "circle",
              "id": "oilHoleProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 1.5
            }
          ]
        },
        {
          "id": "oilHole",
          "type": "extrude",
          "profile": "oilHoleProfile",
          "distance": 7,
          "direction": [
            0,
            0,
            -1
          ],
          "body": "bigEnd",
          "join": "cut"
        },
        {
          "id": "boltRight",
          "type": "hole",
          "body": "bigEnd",
          "on": {
            "of": "bigEnd",
            "role": "side",
            "from": "bigEndProfile.partRight"
          },
          "at": [
            {
              "id": "right",
              "x": 15,
              "y": 0
            }
          ],
          "diameter": 6.1,
          "depth": 10
        },
        {
          "id": "boltLeft",
          "type": "hole",
          "body": "bigEnd",
          "on": {
            "of": "bigEnd",
            "role": "side",
            "from": "bigEndProfile.partLeft"
          },
          "at": [
            {
              "id": "left",
              "x": -15,
              "y": 0
            }
          ],
          "diameter": 6.1,
          "depth": 10
        }
      ],
      "parts": [
        {
          "id": "rod",
          "name": "Connecting rod",
          "body": "bigEnd",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-102"
          },
          "connectors": [
            {
              "id": "big",
              "on": {
                "of": "bigEnd",
                "role": "end"
              },
              "origin": [
                0,
                0,
                24
              ]
            },
            {
              "id": "parting",
              "on": {
                "of": "bigEnd",
                "role": "side",
                "from": "bigEndProfile.partRight"
              },
              "origin": [
                0,
                0,
                24
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000000d",
      "up": "z",
      "meta": {
        "name": "Rod cap",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "capProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            20.5,
            24
          ],
          "pen": [
            {
              "type": "line",
              "id": "partRight",
              "to": [
                10,
                24
              ]
            },
            {
              "type": "threePointArc",
              "id": "bore",
              "through": [
                0,
                14
              ],
              "to": [
                -10,
                24
              ]
            },
            {
              "type": "line",
              "id": "partLeft",
              "to": [
                -20.5,
                24
              ]
            },
            {
              "type": "line",
              "id": "outerLeft",
              "to": [
                -20.5,
                10
              ]
            },
            {
              "type": "filletCorner",
              "id": "bottomRoundLeft",
              "radius": 2
            },
            {
              "type": "line",
              "id": "bottom",
              "to": [
                20.5,
                10
              ]
            },
            {
              "type": "filletCorner",
              "id": "bottomRoundRight",
              "radius": 2
            },
            {
              "type": "close",
              "id": "outerRight"
            }
          ]
        },
        {
          "id": "cap",
          "type": "extrude",
          "profile": "capProfile",
          "distance": 16
        },
        {
          "id": "boltHoles",
          "type": "hole",
          "body": "cap",
          "on": {
            "of": "cap",
            "role": "side",
            "from": "capProfile.bottom"
          },
          "at": [
            {
              "id": "right",
              "x": 15,
              "y": 0
            },
            {
              "id": "left",
              "x": -15,
              "y": 0
            }
          ],
          "fastener": {
            "size": "M6",
            "fit": "normal"
          }
        }
      ],
      "parts": [
        {
          "id": "rodCap",
          "name": "Rod cap",
          "body": "cap",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-105"
          },
          "connectors": [
            {
              "id": "parting",
              "on": {
                "of": "cap",
                "role": "side",
                "from": "capProfile.partRight"
              },
              "origin": [
                0,
                0,
                24
              ]
            },
            {
              "id": "bolts",
              "on": {
                "of": "cap",
                "role": "side",
                "from": "capProfile.bottom"
              },
              "axis": {
                "of": "boltHoles",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000005",
      "up": "z",
      "meta": {
        "name": "Piston",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "skirtProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 90
          },
          "pen": [
            {
              "type": "circle",
              "id": "skirtProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 25.95
            }
          ]
        },
        {
          "id": "skirt",
          "type": "extrude",
          "profile": "skirtProfile",
          "distance": 46
        },
        {
          "id": "crownRound",
          "type": "fillet",
          "body": "skirt",
          "edges": {
            "between": [
              {
                "of": "skirt",
                "role": "end"
              },
              {
                "of": "skirt",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.8
        },
        {
          "id": "skirtRound",
          "type": "fillet",
          "body": "skirt",
          "edges": {
            "between": [
              {
                "of": "skirt",
                "role": "start"
              },
              {
                "of": "skirt",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "hollowProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 90
          },
          "pen": [
            {
              "type": "circle",
              "id": "hollowProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 22.95
            }
          ]
        },
        {
          "id": "hollow",
          "type": "extrude",
          "profile": "hollowProfile",
          "distance": 40
        },
        {
          "id": "hollowed",
          "type": "boolean",
          "operation": "difference",
          "body": "skirt",
          "tools": [
            "hollow"
          ]
        },
        {
          "id": "bossAProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -9,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "bossAProfileRim",
              "centre": [
                0,
                114
              ],
              "radius": 9
            }
          ]
        },
        {
          "id": "bossA",
          "type": "extrude",
          "profile": "bossAProfile",
          "distance": 13.95
        },
        {
          "id": "bossBProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                22.95,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "bossBProfileRim",
              "centre": [
                0,
                114
              ],
              "radius": 9
            }
          ]
        },
        {
          "id": "bossB",
          "type": "extrude",
          "profile": "bossBProfile",
          "distance": 13.95
        },
        {
          "id": "bossed",
          "type": "boolean",
          "operation": "union",
          "body": "skirt",
          "tools": [
            "bossA",
            "bossB"
          ]
        },
        {
          "id": "pinBoreProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                26.95,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "pinBoreProfileRim",
              "centre": [
                0,
                114
              ],
              "radius": 6
            }
          ]
        },
        {
          "id": "pinBore",
          "type": "extrude",
          "profile": "pinBoreProfile",
          "distance": 53.9
        },
        {
          "id": "groove0Profile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 131.4
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "groove0ProfileOuter",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 26.95
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "groove0ProfileInner",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 23.35
                }
              ]
            }
          ]
        },
        {
          "id": "groove0",
          "type": "extrude",
          "profile": "groove0Profile",
          "distance": 1.6
        },
        {
          "id": "groove1Profile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 127.9
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "groove1ProfileOuter",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 26.95
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "groove1ProfileInner",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 23.35
                }
              ]
            }
          ]
        },
        {
          "id": "groove1",
          "type": "extrude",
          "profile": "groove1Profile",
          "distance": 1.6
        },
        {
          "id": "groove2Profile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 124.4
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "groove2ProfileOuter",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 26.95
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "groove2ProfileInner",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 23.35
                }
              ]
            }
          ]
        },
        {
          "id": "groove2",
          "type": "extrude",
          "profile": "groove2Profile",
          "distance": 1.6
        },
        {
          "id": "slipperFrontProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                30,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -22,
            89
          ],
          "pen": [
            {
              "type": "line",
              "id": "slipperFrontProfile0",
              "to": [
                22,
                89
              ]
            },
            {
              "type": "line",
              "id": "slipperFrontProfile1",
              "to": [
                22,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "slipperFrontProfileRound1",
              "radius": 6
            },
            {
              "type": "line",
              "id": "slipperFrontProfile2",
              "to": [
                -22,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "slipperFrontProfileRound2",
              "radius": 6
            },
            {
              "type": "close",
              "id": "slipperFrontProfileClose"
            }
          ]
        },
        {
          "id": "slipperFront",
          "type": "extrude",
          "profile": "slipperFrontProfile",
          "distance": 13
        },
        {
          "id": "slipperBackProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -17,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -22,
            89
          ],
          "pen": [
            {
              "type": "line",
              "id": "slipperBackProfile0",
              "to": [
                22,
                89
              ]
            },
            {
              "type": "line",
              "id": "slipperBackProfile1",
              "to": [
                22,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "slipperBackProfileRound1",
              "radius": 6
            },
            {
              "type": "line",
              "id": "slipperBackProfile2",
              "to": [
                -22,
                103
              ]
            },
            {
              "type": "filletCorner",
              "id": "slipperBackProfileRound2",
              "radius": 6
            },
            {
              "type": "close",
              "id": "slipperBackProfileClose"
            }
          ]
        },
        {
          "id": "slipperBack",
          "type": "extrude",
          "profile": "slipperBackProfile",
          "distance": 13
        },
        {
          "id": "bored",
          "type": "boolean",
          "operation": "difference",
          "body": "skirt",
          "tools": [
            "pinBore",
            "groove0",
            "groove1",
            "groove2",
            "slipperFront",
            "slipperBack"
          ]
        },
        {
          "id": "clipGrooveB",
          "type": "ringGroove",
          "body": "skirt",
          "on": {
            "of": "pinBore",
            "role": "side",
            "filter": {
              "select": "nearest",
              "point": [
                0,
                10,
                120
              ]
            },
            "count": 1
          },
          "at": 13.05
        },
        {
          "id": "clipGrooveA",
          "type": "ringGroove",
          "body": "skirt",
          "on": {
            "of": "pinBore",
            "role": "side",
            "filter": {
              "select": "nearest",
              "point": [
                0,
                -10,
                120
              ]
            },
            "count": 1
          },
          "at": 13.05,
          "flip": true
        }
      ],
      "parts": [
        {
          "id": "piston",
          "name": "Piston",
          "body": "skirt",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-103"
          },
          "connectors": [
            {
              "id": "crown",
              "on": {
                "of": "skirt",
                "role": "end"
              }
            },
            {
              "id": "boss",
              "on": {
                "of": "bossA",
                "role": "start"
              },
              "origin": [
                0,
                0,
                114
              ]
            },
            {
              "id": "clipB",
              "on": {
                "of": "clipGrooveB",
                "role": "groove",
                "filter": {
                  "select": "nearest",
                  "point": [
                    0,
                    22.05,
                    120.1
                  ]
                },
                "count": 1
              },
              "origin": [
                0,
                22.05,
                114
              ]
            },
            {
              "id": "clipA",
              "on": {
                "of": "clipGrooveA",
                "role": "groove",
                "filter": {
                  "select": "nearest",
                  "point": [
                    0,
                    -22.05,
                    120.1
                  ]
                },
                "count": 1
              },
              "origin": [
                0,
                -22.05,
                114
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000006",
      "up": "z",
      "meta": {
        "name": "Gudgeon pin",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "tubeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                22,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "tubeProfileOuter",
                  "centre": [
                    0,
                    114
                  ],
                  "radius": 6
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "tubeProfileInner",
                  "centre": [
                    0,
                    114
                  ],
                  "radius": 3.5
                }
              ]
            }
          ]
        },
        {
          "id": "tube",
          "type": "extrude",
          "profile": "tubeProfile",
          "distance": 44
        }
      ],
      "parts": [
        {
          "id": "gudgeonPin",
          "name": "Gudgeon pin",
          "body": "tube",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-104"
          },
          "connectors": [
            {
              "id": "end",
              "on": {
                "of": "tube",
                "role": "end"
              },
              "origin": [
                0,
                0,
                114
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000016",
      "up": "z",
      "meta": {
        "name": "Piston ring",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "ringProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 131.45
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "ringProfileOuter",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 25.975
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "ringProfileInner",
                  "centre": [
                    0,
                    0
                  ],
                  "radius": 23.45
                }
              ]
            }
          ]
        },
        {
          "id": "ring",
          "type": "extrude",
          "profile": "ringProfile",
          "distance": 1.5
        }
      ],
      "parts": [
        {
          "id": "pistonRing",
          "name": "Piston ring",
          "body": "ring",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-106"
          },
          "connectors": [
            {
              "id": "top",
              "on": {
                "of": "ring",
                "role": "end"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000007",
      "up": "z",
      "meta": {
        "name": "Camshaft",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "shaftProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                59,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "shaftProfileRim",
              "centre": [
                42,
                42.848570571
              ],
              "radius": 7
            }
          ]
        },
        {
          "id": "shaft",
          "type": "extrude",
          "profile": "shaftProfile",
          "distance": 93
        },
        {
          "id": "intakeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -10,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            54.000342,
            35.638038
          ],
          "pen": [
            {
              "type": "cubic",
              "id": "intakeProfileFlank0",
              "control1": [
                54.346423,
                36.214013
              ],
              "control2": [
                55.340647,
                38.065972
              ],
              "to": [
                55.858417,
                39.300713
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank1",
              "control1": [
                56.376187,
                40.535455
              ],
              "control2": [
                56.785204,
                41.764114
              ],
              "to": [
                57.086897,
                42.930675
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank2",
              "control1": [
                57.38859,
                44.097235
              ],
              "control2": [
                57.58335,
                45.200939
              ],
              "to": [
                57.692701,
                46.199414
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank3",
              "control1": [
                57.802052,
                47.19789
              ],
              "control2": [
                57.826693,
                48.090708
              ],
              "to": [
                57.799892,
                48.858185
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank4",
              "control1": [
                57.773091,
                49.625662
              ],
              "control2": [
                57.695652,
                50.267815
              ],
              "to": [
                57.601085,
                50.790778
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank5",
              "control1": [
                57.506518,
                51.313741
              ],
              "control2": [
                57.395495,
                51.717968
              ],
              "to": [
                57.290484,
                52.031815
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank6",
              "control1": [
                57.185472,
                52.345662
              ],
              "control2": [
                57.086815,
                52.56989
              ],
              "to": [
                56.998154,
                52.745791
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank7",
              "control1": [
                56.909492,
                52.921693
              ],
              "control2": [
                56.830739,
                53.050123
              ],
              "to": [
                56.744737,
                53.172946
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank8",
              "control1": [
                56.658735,
                53.29577
              ],
              "control2": [
                56.564985,
                53.4137
              ],
              "to": [
                56.430016,
                53.557176
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank9",
              "control1": [
                56.295047,
                53.700652
              ],
              "control2": [
                56.118084,
                53.87005
              ],
              "to": [
                55.85908,
                54.076071
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank10",
              "control1": [
                55.600077,
                54.282091
              ],
              "control2": [
                55.2582,
                54.524672
              ],
              "to": [
                54.799119,
                54.7924
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank11",
              "control1": [
                54.340038,
                55.060128
              ],
              "control2": [
                53.763098,
                55.352526
              ],
              "to": [
                53.051072,
                55.640204
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank12",
              "control1": [
                52.339046,
                55.927881
              ],
              "control2": [
                51.491643,
                56.210087
              ],
              "to": [
                50.515983,
                56.44883
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank13",
              "control1": [
                49.540323,
                56.687572
              ],
              "control2": [
                48.436568,
                56.882047
              ],
              "to": [
                47.237175,
                56.997535
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank14",
              "control1": [
                46.037782,
                57.113023
              ],
              "control2": [
                44.743328,
                57.1489
              ],
              "to": [
                43.405962,
                57.084661
              ]
            },
            {
              "type": "cubic",
              "id": "intakeProfileFlank15",
              "control1": [
                42.068597,
                57.020423
              ],
              "control2": [
                39.98828,
                56.719566
              ],
              "to": [
                39.328674,
                56.591351
              ]
            },
            {
              "type": "threePointArc",
              "id": "intakeProfileBase",
              "through": [
                30.531871,
                34.8185
              ],
              "to": [
                54.000342,
                35.638038
              ]
            }
          ]
        },
        {
          "id": "intakeLobe",
          "type": "extrude",
          "profile": "intakeProfile",
          "distance": 8
        },
        {
          "id": "exhaustProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                18,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            44.671326,
            56.591351
          ],
          "pen": [
            {
              "type": "cubic",
              "id": "exhaustProfileFlank0",
              "control1": [
                44.01172,
                56.719566
              ],
              "control2": [
                41.931403,
                57.020423
              ],
              "to": [
                40.594038,
                57.084661
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank1",
              "control1": [
                39.256672,
                57.1489
              ],
              "control2": [
                37.962218,
                57.113023
              ],
              "to": [
                36.762825,
                56.997535
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank2",
              "control1": [
                35.563432,
                56.882047
              ],
              "control2": [
                34.459677,
                56.687572
              ],
              "to": [
                33.484017,
                56.44883
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank3",
              "control1": [
                32.508357,
                56.210087
              ],
              "control2": [
                31.660954,
                55.927881
              ],
              "to": [
                30.948928,
                55.640204
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank4",
              "control1": [
                30.236902,
                55.352526
              ],
              "control2": [
                29.659962,
                55.060128
              ],
              "to": [
                29.200881,
                54.7924
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank5",
              "control1": [
                28.7418,
                54.524672
              ],
              "control2": [
                28.399923,
                54.282091
              ],
              "to": [
                28.14092,
                54.076071
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank6",
              "control1": [
                27.881916,
                53.87005
              ],
              "control2": [
                27.704953,
                53.700652
              ],
              "to": [
                27.569984,
                53.557176
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank7",
              "control1": [
                27.435015,
                53.4137
              ],
              "control2": [
                27.341265,
                53.29577
              ],
              "to": [
                27.255263,
                53.172946
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank8",
              "control1": [
                27.169261,
                53.050123
              ],
              "control2": [
                27.090508,
                52.921693
              ],
              "to": [
                27.001846,
                52.745791
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank9",
              "control1": [
                26.913185,
                52.56989
              ],
              "control2": [
                26.814528,
                52.345662
              ],
              "to": [
                26.709516,
                52.031815
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank10",
              "control1": [
                26.604505,
                51.717968
              ],
              "control2": [
                26.493482,
                51.313741
              ],
              "to": [
                26.398915,
                50.790778
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank11",
              "control1": [
                26.304348,
                50.267815
              ],
              "control2": [
                26.226909,
                49.625662
              ],
              "to": [
                26.200108,
                48.858185
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank12",
              "control1": [
                26.173307,
                48.090708
              ],
              "control2": [
                26.197948,
                47.19789
              ],
              "to": [
                26.307299,
                46.199414
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank13",
              "control1": [
                26.41665,
                45.200939
              ],
              "control2": [
                26.61141,
                44.097235
              ],
              "to": [
                26.913103,
                42.930675
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank14",
              "control1": [
                27.214796,
                41.764114
              ],
              "control2": [
                27.623813,
                40.535455
              ],
              "to": [
                28.141583,
                39.300713
              ]
            },
            {
              "type": "cubic",
              "id": "exhaustProfileFlank15",
              "control1": [
                28.659353,
                38.065972
              ],
              "control2": [
                29.653577,
                36.214013
              ],
              "to": [
                29.999658,
                35.638038
              ]
            },
            {
              "type": "threePointArc",
              "id": "exhaustProfileBase",
              "through": [
                53.468129,
                34.8185
              ],
              "to": [
                44.671326,
                56.591351
              ]
            }
          ]
        },
        {
          "id": "exhaustLobe",
          "type": "extrude",
          "profile": "exhaustProfile",
          "distance": 8
        },
        {
          "id": "collarProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                35.95,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "collarProfileRim",
              "centre": [
                42,
                42.848570571
              ],
              "radius": 11
            }
          ]
        },
        {
          "id": "collar",
          "type": "extrude",
          "profile": "collarProfile",
          "distance": 5.95
        },
        {
          "id": "camshaft",
          "type": "boolean",
          "operation": "union",
          "body": "shaft",
          "tools": [
            "intakeLobe",
            "exhaustLobe",
            "collar"
          ]
        }
      ],
      "parts": [
        {
          "id": "camshaft",
          "name": "Camshaft",
          "body": "shaft",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-110"
          },
          "connectors": [
            {
              "id": "drive",
              "on": {
                "of": "shaft",
                "role": "start"
              },
              "origin": [
                42,
                0,
                42.848570571
              ]
            },
            {
              "id": "gearSeat",
              "on": {
                "of": "collar",
                "role": "start"
              },
              "origin": [
                42,
                0,
                42.848570571
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000009",
      "up": "z",
      "meta": {
        "name": "Cam gear",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "gearProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                46,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "gear",
                  "id": "teeth",
                  "centre": [
                    42,
                    42.848571
                  ],
                  "module": 2,
                  "teeth": 40,
                  "backlash": 0.1,
                  "rotation": 230.072996
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "bore",
                  "centre": [
                    42,
                    42.848571
                  ],
                  "radius": 7.05
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "lightening0",
                  "centre": [
                    61.052559,
                    53.848571
                  ],
                  "radius": 7
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "lightening1",
                  "centre": [
                    42,
                    64.848571
                  ],
                  "radius": 7
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "lightening2",
                  "centre": [
                    22.947441,
                    53.848571
                  ],
                  "radius": 7
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "lightening3",
                  "centre": [
                    22.947441,
                    31.848571
                  ],
                  "radius": 7
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "lightening4",
                  "centre": [
                    42,
                    20.848571
                  ],
                  "radius": 7
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "lightening5",
                  "centre": [
                    61.052559,
                    31.848571
                  ],
                  "radius": 7
                }
              ]
            }
          ]
        },
        {
          "id": "gear",
          "type": "extrude",
          "profile": "gearProfile",
          "distance": 10
        }
      ],
      "parts": [
        {
          "id": "camGear",
          "name": "Cam gear",
          "body": "gear",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-112 z40 m2"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "gear",
                "role": "end"
              },
              "origin": [
                42,
                0,
                42.848571
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000000a",
      "up": "z",
      "meta": {
        "name": "Tappet",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "tappetProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -14,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            42,
            56.898570571
          ],
          "pen": [
            {
              "type": "line",
              "id": "tappetProfile0",
              "to": [
                51.5,
                56.898570571
              ]
            },
            {
              "type": "line",
              "id": "tappetProfile1",
              "to": [
                52,
                57.398570571
              ]
            },
            {
              "type": "line",
              "id": "tappetProfile2",
              "to": [
                52,
                59.498570571
              ]
            },
            {
              "type": "filletCorner",
              "id": "tappetProfileRound2",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "tappetProfile3",
              "to": [
                47,
                60.898570571
              ]
            },
            {
              "type": "filletCorner",
              "id": "tappetProfileRound3",
              "radius": 1.2
            },
            {
              "type": "line",
              "id": "tappetProfile4",
              "to": [
                47,
                77.098570571
              ]
            },
            {
              "type": "filletCorner",
              "id": "tappetProfileRound4",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "tappetProfile5",
              "to": [
                45,
                77.298570571
              ]
            },
            {
              "type": "line",
              "id": "tappetProfile6",
              "to": [
                45,
                79.298570571
              ]
            },
            {
              "type": "line",
              "id": "tappetProfile7",
              "to": [
                46,
                79.298570571
              ]
            },
            {
              "type": "filletCorner",
              "id": "tappetProfileRound7",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "tappetProfile8",
              "to": [
                46,
                80.898570571
              ]
            },
            {
              "type": "filletCorner",
              "id": "tappetProfileRound8",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "tappetProfile9",
              "to": [
                42,
                80.898570571
              ]
            },
            {
              "type": "close",
              "id": "tappetProfileClose"
            }
          ]
        },
        {
          "id": "tappet",
          "type": "revolve",
          "profile": "tappetProfile",
          "axis": {
            "origin": [
              42,
              -14,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        },
        {
          "id": "nutProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 77.298570571
          },
          "start": [
            47.773503,
            -14
          ],
          "pen": [
            {
              "type": "line",
              "id": "nutProfile0",
              "to": [
                44.886751,
                -9
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound0",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "nutProfile1",
              "to": [
                39.113249,
                -9
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound1",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "nutProfile2",
              "to": [
                36.226497,
                -14
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound2",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "nutProfile3",
              "to": [
                39.113249,
                -19
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound3",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "nutProfile4",
              "to": [
                44.886751,
                -19
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound4",
              "radius": 0.3
            },
            {
              "type": "close",
              "id": "nutProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRoundStart",
              "radius": 0.3
            }
          ]
        },
        {
          "id": "nut",
          "type": "extrude",
          "profile": "nutProfile",
          "distance": 2
        },
        {
          "id": "nutRoundTop",
          "type": "fillet",
          "body": "nut",
          "edges": {
            "between": [
              {
                "of": "nut",
                "role": "end"
              },
              {
                "of": "nut",
                "role": "side"
              }
            ],
            "count": 12
          },
          "radius": 0.4
        },
        {
          "id": "nutRoundBottom",
          "type": "fillet",
          "body": "nut",
          "edges": {
            "between": [
              {
                "of": "nut",
                "role": "start"
              },
              {
                "of": "nut",
                "role": "side"
              }
            ],
            "count": 12
          },
          "radius": 0.4
        },
        {
          "id": "adjusted",
          "type": "boolean",
          "operation": "union",
          "body": "tappet",
          "tools": [
            "nut"
          ]
        }
      ],
      "parts": [
        {
          "id": "tappet",
          "name": "Tappet",
          "body": "tappet",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-120"
          },
          "connectors": [
            {
              "id": "top",
              "on": {
                "of": "tappet",
                "role": "side",
                "from": "tappetProfile.tappetProfile9"
              },
              "origin": [
                42,
                -14,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000000b",
      "up": "z",
      "meta": {
        "name": "Valve",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "valveProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -14,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            42,
            80.998570571
          ],
          "pen": [
            {
              "type": "line",
              "id": "valveProfile0",
              "to": [
                45.1,
                80.998570571
              ]
            },
            {
              "type": "line",
              "id": "valveProfile1",
              "to": [
                45.5,
                81.398570571
              ]
            },
            {
              "type": "line",
              "id": "valveProfile2",
              "to": [
                45.5,
                128.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "valveProfileRound2",
              "radius": 5
            },
            {
              "type": "line",
              "id": "valveProfile3",
              "to": [
                50.8,
                134.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "valveProfileRound3",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "valveProfile4",
              "to": [
                53,
                136.25
              ]
            },
            {
              "type": "filletCorner",
              "id": "valveProfileRound4",
              "radius": 0.2
            },
            {
              "type": "line",
              "id": "valveProfile5",
              "to": [
                53,
                136.65
              ]
            },
            {
              "type": "line",
              "id": "valveProfile6",
              "to": [
                52.6,
                137.05
              ]
            },
            {
              "type": "line",
              "id": "valveProfile7",
              "to": [
                42,
                137.05
              ]
            },
            {
              "type": "close",
              "id": "valveProfileClose"
            }
          ]
        },
        {
          "id": "valve",
          "type": "revolve",
          "profile": "valveProfile",
          "axis": {
            "origin": [
              42,
              -14,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        }
      ],
      "parts": [
        {
          "id": "valve",
          "name": "Valve",
          "body": "valve",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-121"
          },
          "connectors": [
            {
              "id": "top",
              "on": {
                "of": "valve",
                "role": "side",
                "from": "valveProfile.valveProfile7"
              },
              "origin": [
                42,
                -14,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000000c",
      "up": "z",
      "meta": {
        "name": "Spring retainer",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "collarProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -14,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            45.55,
            82
          ],
          "pen": [
            {
              "type": "line",
              "id": "collarProfile0",
              "to": [
                51,
                82
              ]
            },
            {
              "type": "filletCorner",
              "id": "collarProfileRound0",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "collarProfile1",
              "to": [
                51,
                84
              ]
            },
            {
              "type": "filletCorner",
              "id": "collarProfileRound1",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "collarProfile2",
              "to": [
                47.4,
                84
              ]
            },
            {
              "type": "line",
              "id": "collarProfile3",
              "to": [
                46.9,
                85.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "collarProfileRound3",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "collarProfile4",
              "to": [
                45.55,
                85.6
              ]
            },
            {
              "type": "close",
              "id": "collarProfileClose"
            }
          ]
        },
        {
          "id": "collar",
          "type": "revolve",
          "profile": "collarProfile",
          "axis": {
            "origin": [
              42,
              -14,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        }
      ],
      "parts": [
        {
          "id": "retainer",
          "name": "Spring retainer",
          "body": "collar",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-122"
          },
          "connectors": [
            {
              "id": "top",
              "on": {
                "of": "collar",
                "role": "side",
                "from": "collarProfile.collarProfile2"
              },
              "origin": [
                42,
                -14,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000017",
      "up": "z",
      "meta": {
        "name": "Valve spring seat",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "washerProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 106.5
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "washerProfileOuter",
                  "centre": [
                    42,
                    -14
                  ],
                  "radius": 9.5
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "washerProfileInner",
                  "centre": [
                    42,
                    -14
                  ],
                  "radius": 3.6
                }
              ]
            }
          ]
        },
        {
          "id": "washer",
          "type": "extrude",
          "profile": "washerProfile",
          "distance": 1.5
        }
      ],
      "parts": [
        {
          "id": "springSeat",
          "name": "Valve spring seat",
          "body": "washer",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-123"
          },
          "connectors": [
            {
              "id": "top",
              "on": {
                "of": "washer",
                "role": "end"
              },
              "origin": [
                42,
                -14,
                0
              ]
            },
            {
              "id": "bottom",
              "on": {
                "of": "washer",
                "role": "start"
              },
              "origin": [
                42,
                -14,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000011",
      "up": "z",
      "meta": {
        "name": "Spark plug",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "threadProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 139
          },
          "pen": [
            {
              "type": "circle",
              "id": "threadProfileRim",
              "centre": [
                18,
                0
              ],
              "radius": 6.95
            }
          ]
        },
        {
          "id": "thread",
          "type": "extrude",
          "profile": "threadProfile",
          "distance": 12
        },
        {
          "id": "hexProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 151
          },
          "start": [
            28.392305,
            6
          ],
          "pen": [
            {
              "type": "line",
              "id": "hexProfile0",
              "to": [
                18,
                12
              ]
            },
            {
              "type": "line",
              "id": "hexProfile1",
              "to": [
                7.607695,
                6
              ]
            },
            {
              "type": "line",
              "id": "hexProfile2",
              "to": [
                7.607695,
                -6
              ]
            },
            {
              "type": "line",
              "id": "hexProfile3",
              "to": [
                18,
                -12
              ]
            },
            {
              "type": "line",
              "id": "hexProfile4",
              "to": [
                28.392305,
                -6
              ]
            },
            {
              "type": "close",
              "id": "hexProfileClose"
            }
          ]
        },
        {
          "id": "hex",
          "type": "extrude",
          "profile": "hexProfile",
          "distance": 9
        },
        {
          "id": "hexRound",
          "type": "fillet",
          "body": "hex",
          "edges": {
            "between": [
              {
                "of": "hex",
                "role": "end"
              },
              {
                "of": "hex",
                "role": "side"
              }
            ],
            "count": 6
          },
          "radius": 0.8
        },
        {
          "id": "insulatorProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            18,
            159.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "insulatorProfile0",
              "to": [
                24.6,
                159.5
              ]
            },
            {
              "type": "line",
              "id": "insulatorProfile1",
              "to": [
                24.6,
                162
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound1",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "insulatorProfile2",
              "to": [
                23.5,
                162.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound2",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile3",
              "to": [
                23.5,
                163.8
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound3",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile4",
              "to": [
                24.3,
                164.4
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound4",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile5",
              "to": [
                24.3,
                165
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound5",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile6",
              "to": [
                23.5,
                165.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound6",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile7",
              "to": [
                23.5,
                166.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound7",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile8",
              "to": [
                24.3,
                166.8
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound8",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile9",
              "to": [
                24.3,
                167.4
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound9",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile10",
              "to": [
                23.5,
                168
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound10",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile11",
              "to": [
                23.5,
                168.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound11",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile12",
              "to": [
                24.3,
                169.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound12",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile13",
              "to": [
                24.3,
                169.8
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound13",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile14",
              "to": [
                23.5,
                170.4
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound14",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile15",
              "to": [
                23.5,
                171
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound15",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile16",
              "to": [
                24.3,
                171.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound16",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile17",
              "to": [
                24.3,
                172.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound17",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile18",
              "to": [
                23.5,
                172.8
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound18",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile19",
              "to": [
                23.5,
                173.4
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound19",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile20",
              "to": [
                24.3,
                174
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound20",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile21",
              "to": [
                24.3,
                174.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound21",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "insulatorProfile22",
              "to": [
                23.5,
                175.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound22",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile23",
              "to": [
                23.5,
                184
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound23",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "insulatorProfile24",
              "to": [
                22.2,
                185
              ]
            },
            {
              "type": "filletCorner",
              "id": "insulatorProfileRound24",
              "radius": 0.3
            },
            {
              "type": "line",
              "id": "insulatorProfile25",
              "to": [
                18,
                185
              ]
            },
            {
              "type": "close",
              "id": "insulatorProfileClose"
            }
          ]
        },
        {
          "id": "insulator",
          "type": "revolve",
          "profile": "insulatorProfile",
          "axis": {
            "origin": [
              18,
              0,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        },
        {
          "id": "terminalProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 184.5
          },
          "pen": [
            {
              "type": "circle",
              "id": "terminalProfileRim",
              "centre": [
                18,
                0
              ],
              "radius": 2.5
            }
          ]
        },
        {
          "id": "terminal",
          "type": "extrude",
          "profile": "terminalProfile",
          "distance": 6.5
        },
        {
          "id": "terminalRound",
          "type": "fillet",
          "body": "terminal",
          "edges": {
            "between": [
              {
                "of": "terminal",
                "role": "end"
              },
              {
                "of": "terminal",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.5
        },
        {
          "id": "electrodeProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 139.5
          },
          "pen": [
            {
              "type": "circle",
              "id": "electrodeProfileRim",
              "centre": [
                18,
                0
              ],
              "radius": 1
            }
          ]
        },
        {
          "id": "electrode",
          "type": "extrude",
          "profile": "electrodeProfile",
          "distance": 1.1,
          "direction": [
            0,
            0,
            -1
          ]
        },
        {
          "id": "groundProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0.9,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            23,
            139.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "groundProfile0",
              "to": [
                22.1,
                139.5
              ]
            },
            {
              "type": "line",
              "id": "groundProfile1",
              "to": [
                22.1,
                137.7
              ]
            },
            {
              "type": "filletCorner",
              "id": "groundProfileRound1",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "groundProfile2",
              "to": [
                17.4,
                137.7
              ]
            },
            {
              "type": "line",
              "id": "groundProfile3",
              "to": [
                17.4,
                136.8
              ]
            },
            {
              "type": "line",
              "id": "groundProfile4",
              "to": [
                23,
                136.8
              ]
            },
            {
              "type": "filletCorner",
              "id": "groundProfileRound4",
              "radius": 1.2
            },
            {
              "type": "close",
              "id": "groundProfileClose"
            }
          ]
        },
        {
          "id": "ground",
          "type": "extrude",
          "profile": "groundProfile",
          "distance": 1.8
        },
        {
          "id": "plug",
          "type": "boolean",
          "operation": "union",
          "body": "hex",
          "tools": [
            "thread",
            "insulator",
            "terminal",
            "electrode",
            "ground"
          ]
        }
      ],
      "parts": [
        {
          "id": "sparkPlug",
          "name": "Spark plug",
          "body": "hex",
          "material": "steel",
          "appearance": {
            "faces": [
              {
                "faces": {
                  "of": "insulator",
                  "role": "side"
                },
                "color": "#f2f0ea",
                "metallic": 0,
                "roughness": 0.25
              }
            ]
          },
          "properties": {
            "partNumber": "ENG-150"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "hex",
                "role": "start"
              },
              "origin": [
                18,
                0,
                0
              ]
            },
            {
              "id": "terminal",
              "on": {
                "of": "terminal",
                "role": "end"
              },
              "origin": [
                18,
                0,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000012",
      "up": "z",
      "meta": {
        "name": "Socket head cap screw",
        "generator": "engine-app"
      },
      "parameters": {
        "size": {
          "type": "choice",
          "value": "M6",
          "options": [
            {
              "value": "M3"
            },
            {
              "value": "M4"
            },
            {
              "value": "M5"
            },
            {
              "value": "M6"
            },
            {
              "value": "M8"
            },
            {
              "value": "M10"
            }
          ],
          "description": "The ISO metric size of the screw"
        },
        "length": {
          "value": 20,
          "unit": "mm",
          "min": 1,
          "step": 1,
          "description": "How long the screw is under its head"
        }
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "part",
          "type": "operation",
          "operation": "occt.parts.mechanical.fasteners.iso.socketHeadCapScrew",
          "params": {
            "size": {
              "expr": "size"
            },
            "length": {
              "expr": "length"
            },
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          }
        }
      ],
      "parts": [
        {
          "id": "screw",
          "name": "Socket head cap screw",
          "body": "part",
          "material": "steel",
          "properties": {
            "partNumber": "ISO 4762 {size}x{length}"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "part",
                "role": "seat"
              },
              "axis": {
                "of": "part",
                "role": "thread"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000013",
      "up": "z",
      "meta": {
        "name": "Ball bearing",
        "generator": "engine-app"
      },
      "parameters": {
        "designation": {
          "type": "choice",
          "value": "6204",
          "options": [
            {
              "value": "6203"
            },
            {
              "value": "6204"
            },
            {
              "value": "6205"
            }
          ],
          "description": "The bearing's designation, which sets its bore, outside and width"
        }
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "part",
          "type": "operation",
          "operation": "occt.parts.mechanical.bearings.iso.ballBearing",
          "params": {
            "designation": {
              "expr": "designation"
            },
            "shields": true,
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          }
        }
      ],
      "parts": [
        {
          "id": "bearing",
          "name": "Ball bearing",
          "body": "part",
          "material": "steel",
          "properties": {
            "partNumber": "{designation}-2Z"
          },
          "connectors": [
            {
              "id": "inner",
              "on": {
                "of": "part",
                "role": "innerStart"
              },
              "axis": {
                "of": "part",
                "role": "bore"
              }
            },
            {
              "id": "outer",
              "on": {
                "of": "part",
                "role": "outerStart"
              },
              "axis": {
                "of": "part",
                "role": "outside"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000014",
      "up": "z",
      "meta": {
        "name": "Valve spring",
        "generator": "engine-app"
      },
      "parameters": {
        "wireDiameter": {
          "value": 2,
          "unit": "mm",
          "min": 0.1,
          "step": 0.1,
          "description": "The diameter of the wire it is coiled from"
        },
        "diameter": {
          "value": 16,
          "unit": "mm",
          "min": 0.5,
          "step": 0.5,
          "description": "The coils' outside diameter"
        },
        "activeCoils": {
          "value": 4,
          "unit": "none",
          "min": 1,
          "step": 0.5,
          "description": "How many coils spring, besides the closed one at each end"
        },
        "length": {
          "value": 24,
          "unit": "mm",
          "min": 1,
          "step": 0.5,
          "description": "How long it stands; the valve's lift shortens it"
        }
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "part",
          "type": "operation",
          "operation": "occt.parts.mechanical.springs.compressionSpring",
          "params": {
            "wireDiameter": {
              "expr": "wireDiameter"
            },
            "diameter": {
              "expr": "diameter"
            },
            "activeCoils": {
              "expr": "activeCoils"
            },
            "length": {
              "expr": "length"
            },
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          }
        }
      ],
      "parts": [
        {
          "id": "spring",
          "name": "Valve spring",
          "body": "part",
          "material": "steel",
          "properties": {
            "partNumber": "Spring {wireDiameter}x{diameter}x{length}"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "part",
                "role": "bottom"
              }
            },
            {
              "id": "top",
              "on": {
                "of": "part",
                "role": "top"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000015",
      "up": "z",
      "meta": {
        "name": "Parallel key",
        "generator": "engine-app"
      },
      "parameters": {
        "shaftDiameter": {
          "value": 20,
          "unit": "mm",
          "min": 6,
          "step": 1,
          "description": "The diameter of the shaft the key sits in, which sets its width and height"
        },
        "length": {
          "value": 10,
          "unit": "mm",
          "min": 1,
          "step": 1,
          "description": "How long the key is, more than its width"
        }
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "part",
          "type": "operation",
          "operation": "occt.parts.mechanical.keys.din.parallelKey",
          "params": {
            "shaftDiameter": {
              "expr": "shaftDiameter"
            },
            "length": {
              "expr": "length"
            },
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          }
        }
      ],
      "parts": [
        {
          "id": "key",
          "name": "Parallel key",
          "body": "part",
          "material": "steel",
          "properties": {
            "partNumber": "DIN 6885 {shaftDiameter}x{length}"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "part",
                "role": "bottom"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000018",
      "up": "z",
      "meta": {
        "name": "Starter cup",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "cupProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            10.2,
            -62.05
          ],
          "pen": [
            {
              "type": "line",
              "id": "cupProfile0",
              "to": [
                26,
                -62.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound0",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "cupProfile1",
              "to": [
                26,
                -64.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound1",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "cupProfile2",
              "to": [
                24,
                -64.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound2",
              "radius": 1
            },
            {
              "type": "line",
              "id": "cupProfile3",
              "to": [
                24,
                -77.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound3",
              "radius": 1
            },
            {
              "type": "line",
              "id": "cupProfile4",
              "to": [
                25.5,
                -78.05
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound4",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "cupProfile5",
              "to": [
                25.5,
                -79.25
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound5",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "cupProfile6",
              "to": [
                21.5,
                -79.25
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound6",
              "radius": 0.9
            },
            {
              "type": "line",
              "id": "cupProfile7",
              "to": [
                21.5,
                -65.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound7",
              "radius": 2
            },
            {
              "type": "line",
              "id": "cupProfile8",
              "to": [
                10.2,
                -65.55
              ]
            },
            {
              "type": "filletCorner",
              "id": "cupProfileRound8",
              "radius": 0.4
            },
            {
              "type": "close",
              "id": "cupProfileClose"
            }
          ]
        },
        {
          "id": "cup",
          "type": "revolve",
          "profile": "cupProfile",
          "axis": {
            "origin": [
              0,
              0,
              0
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "screwHoles",
          "type": "hole",
          "body": "cup",
          "on": {
            "of": "cup",
            "role": "side",
            "from": "cupProfile.cupProfile8"
          },
          "at": [
            {
              "id": "screw0",
              "x": 11.25833,
              "y": 6.5
            },
            {
              "id": "screw1",
              "x": -11.25833,
              "y": 6.5
            },
            {
              "id": "screw2",
              "x": 0,
              "y": -13
            }
          ],
          "fastener": {
            "size": "M4",
            "fit": "normal"
          }
        }
      ],
      "parts": [
        {
          "id": "starterCup",
          "name": "Starter cup",
          "body": "cup",
          "material": "pressed",
          "properties": {
            "partNumber": "ENG-131"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "cup",
                "role": "side",
                "from": "cupProfile.cupProfile0"
              }
            },
            {
              "id": "screws",
              "on": {
                "of": "cup",
                "role": "side",
                "from": "cupProfile.cupProfile8"
              },
              "axis": {
                "of": "screwHoles",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000001d",
      "up": "z",
      "meta": {
        "name": "Valve chest cover",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "plateProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                60.6,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -26.5,
            74
          ],
          "pen": [
            {
              "type": "line",
              "id": "plateProfile0",
              "to": [
                26.5,
                74
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound0",
              "radius": 6
            },
            {
              "type": "line",
              "id": "plateProfile1",
              "to": [
                26.5,
                110
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound1",
              "radius": 6
            },
            {
              "type": "line",
              "id": "plateProfile2",
              "to": [
                -26.5,
                110
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound2",
              "radius": 6
            },
            {
              "type": "close",
              "id": "plateProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "plate",
          "type": "extrude",
          "profile": "plateProfile",
          "distance": 4
        },
        {
          "id": "plateRound",
          "type": "fillet",
          "body": "plate",
          "edges": {
            "between": [
              {
                "of": "plate",
                "role": "end"
              },
              {
                "of": "plate",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 1.5
        },
        {
          "id": "panelProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                64.1,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -16.5,
            80
          ],
          "pen": [
            {
              "type": "line",
              "id": "panelProfile0",
              "to": [
                16.5,
                80
              ]
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRound0",
              "radius": 4
            },
            {
              "type": "line",
              "id": "panelProfile1",
              "to": [
                16.5,
                104
              ]
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "panelProfile2",
              "to": [
                -16.5,
                104
              ]
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRound2",
              "radius": 4
            },
            {
              "type": "close",
              "id": "panelProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRoundStart",
              "radius": 4
            }
          ]
        },
        {
          "id": "panel",
          "type": "extrude",
          "profile": "panelProfile",
          "distance": 2
        },
        {
          "id": "panelRound",
          "type": "fillet",
          "body": "panel",
          "edges": {
            "between": [
              {
                "of": "panel",
                "role": "end"
              },
              {
                "of": "panel",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 0.8
        },
        {
          "id": "breatherBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                65.6,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "breatherBossProfileRim",
              "centre": [
                0,
                99
              ],
              "radius": 4.5
            }
          ]
        },
        {
          "id": "breatherBoss",
          "type": "extrude",
          "profile": "breatherBossProfile",
          "distance": 3.5
        },
        {
          "id": "breatherBossRound",
          "type": "fillet",
          "body": "breatherBoss",
          "edges": {
            "between": [
              {
                "of": "breatherBoss",
                "role": "end"
              },
              {
                "of": "breatherBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1
        },
        {
          "id": "nippleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                68.6,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "nippleProfileRim",
              "centre": [
                0,
                99
              ],
              "radius": 2.6
            }
          ]
        },
        {
          "id": "nipple",
          "type": "extrude",
          "profile": "nippleProfile",
          "distance": 9
        },
        {
          "id": "nippleRound",
          "type": "fillet",
          "body": "nipple",
          "edges": {
            "between": [
              {
                "of": "nipple",
                "role": "end"
              },
              {
                "of": "nipple",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "cast",
          "type": "boolean",
          "operation": "union",
          "body": "plate",
          "tools": [
            "panel",
            "breatherBoss",
            "nipple"
          ]
        },
        {
          "id": "breatherBoreProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                59,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "breatherBoreProfileRim",
              "centre": [
                0,
                99
              ],
              "radius": 1.4
            }
          ]
        },
        {
          "id": "breatherBore",
          "type": "extrude",
          "profile": "breatherBoreProfile",
          "distance": 19.5,
          "body": "plate",
          "join": "cut"
        },
        {
          "id": "screwHoles",
          "type": "hole",
          "body": "plate",
          "on": {
            "of": "plate",
            "role": "end"
          },
          "at": [
            {
              "id": "left",
              "x": -21.5,
              "y": 92
            },
            {
              "id": "right",
              "x": 21.5,
              "y": 92
            }
          ],
          "fastener": {
            "size": "M4",
            "fit": "normal"
          }
        }
      ],
      "parts": [
        {
          "id": "chestCover",
          "name": "Valve chest cover",
          "body": "plate",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-142"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "plate",
                "role": "start"
              },
              "origin": [
                60.6,
                0,
                92
              ]
            },
            {
              "id": "screws",
              "on": {
                "of": "plate",
                "role": "end"
              },
              "axis": {
                "of": "screwHoles",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000001b",
      "up": "z",
      "meta": {
        "name": "Exhaust",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "flangeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                42.6,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "start": [
                58.441005,
                106.584937
              ],
              "pen": [
                {
                  "type": "line",
                  "id": "flangeSide0",
                  "to": [
                    49.224376,
                    131.7384
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRound0",
                  "radius": 8
                },
                {
                  "type": "line",
                  "id": "flangeSide1",
                  "to": [
                    23.558995,
                    139.415063
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRound1",
                  "radius": 5.5
                },
                {
                  "type": "line",
                  "id": "flangeSide2",
                  "to": [
                    32.775624,
                    114.2616
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRound2",
                  "radius": 8
                },
                {
                  "type": "close",
                  "id": "flangeSideClose"
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRoundStart",
                  "radius": 5.5
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "flangeBore",
                  "centre": [
                    41,
                    123
                  ],
                  "radius": 6.5
                }
              ]
            }
          ]
        },
        {
          "id": "flange",
          "type": "extrude",
          "profile": "flangeProfile",
          "distance": 5
        },
        {
          "id": "flangeRound",
          "type": "fillet",
          "body": "flange",
          "edges": {
            "between": [
              {
                "of": "flange",
                "role": "start"
              },
              {
                "of": "flange",
                "role": "side"
              }
            ],
            "count": 9
          },
          "radius": 0.8
        },
        {
          "id": "screwHoles",
          "type": "hole",
          "body": "flange",
          "on": {
            "of": "flange",
            "role": "start"
          },
          "at": [
            {
              "id": "low",
              "x": 49.5,
              "y": -115
            },
            {
              "id": "high",
              "x": 32.5,
              "y": -131
            }
          ],
          "fastener": {
            "size": "M4",
            "fit": "normal"
          },
          "depth": 5
        },
        {
          "id": "pipeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                66,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "pipeOuter",
                  "centre": [
                    41,
                    123
                  ],
                  "radius": 8
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "pipeInner",
                  "centre": [
                    41,
                    123
                  ],
                  "radius": 6.5
                }
              ]
            }
          ]
        },
        {
          "id": "pipe",
          "type": "extrude",
          "profile": "pipeProfile",
          "distance": 24.4
        },
        {
          "id": "shellProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                123
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -6,
            75
          ],
          "pen": [
            {
              "type": "line",
              "id": "shellProfile0",
              "to": [
                -6,
                86
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound0",
              "radius": 3
            },
            {
              "type": "line",
              "id": "shellProfile1",
              "to": [
                -4.5,
                91.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "shellProfile2",
              "to": [
                -3,
                93.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound2",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "shellProfile3",
              "to": [
                -1,
                93.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound3",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "shellProfile4",
              "to": [
                0,
                92
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound4",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "shellProfile5",
              "to": [
                82,
                92
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound5",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "shellProfile6",
              "to": [
                83,
                93.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound6",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "shellProfile7",
              "to": [
                85,
                93.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound7",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "shellProfile8",
              "to": [
                86.5,
                91.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound8",
              "radius": 1
            },
            {
              "type": "line",
              "id": "shellProfile9",
              "to": [
                88,
                86
              ]
            },
            {
              "type": "filletCorner",
              "id": "shellProfileRound9",
              "radius": 3
            },
            {
              "type": "line",
              "id": "shellProfile10",
              "to": [
                88,
                75
              ]
            },
            {
              "type": "close",
              "id": "shellProfileClose"
            }
          ]
        },
        {
          "id": "muffler",
          "type": "revolve",
          "profile": "shellProfile",
          "axis": {
            "origin": [
              0,
              75,
              123
            ],
            "direction": [
              1,
              0,
              0
            ]
          }
        },
        {
          "id": "shieldProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                123
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            6,
            96
          ],
          "pen": [
            {
              "type": "line",
              "id": "shieldProfile0",
              "to": [
                76,
                96
              ]
            },
            {
              "type": "filletCorner",
              "id": "shieldProfileRound0",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "shieldProfile1",
              "to": [
                76,
                97.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shieldProfileRound1",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "shieldProfile2",
              "to": [
                6,
                97.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "shieldProfileRound2",
              "radius": 0.5
            },
            {
              "type": "close",
              "id": "shieldProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "shieldProfileRoundStart",
              "radius": 0.5
            }
          ]
        },
        {
          "id": "shield",
          "type": "revolve",
          "profile": "shieldProfile",
          "axis": {
            "origin": [
              0,
              75,
              123
            ],
            "direction": [
              1,
              0,
              0
            ]
          },
          "angle": 140
        },
        {
          "id": "shieldTurn",
          "type": "transform",
          "body": "shield",
          "rotate": [
            -12,
            0,
            0
          ],
          "pivot": [
            0,
            75,
            123
          ]
        },
        {
          "id": "tab0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                120
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            10,
            91.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "tab0Profile0",
              "to": [
                16,
                91.5
              ]
            },
            {
              "type": "line",
              "id": "tab0Profile1",
              "to": [
                16,
                96.6
              ]
            },
            {
              "type": "line",
              "id": "tab0Profile2",
              "to": [
                10,
                96.6
              ]
            },
            {
              "type": "close",
              "id": "tab0ProfileClose"
            }
          ]
        },
        {
          "id": "tab0",
          "type": "extrude",
          "profile": "tab0Profile",
          "distance": 6
        },
        {
          "id": "tab1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                120
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            66,
            91.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "tab1Profile0",
              "to": [
                72,
                91.5
              ]
            },
            {
              "type": "line",
              "id": "tab1Profile1",
              "to": [
                72,
                96.6
              ]
            },
            {
              "type": "line",
              "id": "tab1Profile2",
              "to": [
                66,
                96.6
              ]
            },
            {
              "type": "close",
              "id": "tab1ProfileClose"
            }
          ]
        },
        {
          "id": "tab1",
          "type": "extrude",
          "profile": "tab1Profile",
          "distance": 6,
          "body": "tab0",
          "join": "add"
        },
        {
          "id": "tabTurn",
          "type": "transform",
          "body": "tab0",
          "rotate": [
            58,
            0,
            0
          ],
          "pivot": [
            0,
            75,
            123
          ]
        },
        {
          "id": "outletProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -5,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "outletOuter",
                  "centre": [
                    75,
                    123
                  ],
                  "radius": 5
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "outletInner",
                  "centre": [
                    75,
                    123
                  ],
                  "radius": 3.8
                }
              ]
            }
          ]
        },
        {
          "id": "outletPath",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                75,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -5,
            123
          ],
          "face": false,
          "pen": [
            {
              "type": "line",
              "id": "outletRun",
              "to": [
                -22,
                123
              ]
            },
            {
              "type": "filletCorner",
              "id": "outletBend",
              "radius": 9
            },
            {
              "type": "line",
              "id": "outletDrop",
              "to": [
                -22,
                104
              ]
            }
          ]
        },
        {
          "id": "outlet",
          "type": "sweep",
          "profile": "outletProfile",
          "path": "outletPath"
        },
        {
          "id": "welded",
          "type": "boolean",
          "operation": "union",
          "body": "flange",
          "tools": [
            "pipe",
            "muffler",
            "shield",
            "tab0",
            "outlet"
          ]
        },
        {
          "id": "louvre0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                99.954755,
                126.507162
              ],
              "normal": [
                0,
                -0.990268,
                -0.139173
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14,
            -1.6
          ],
          "pen": [
            {
              "type": "line",
              "id": "louvre0Profile0",
              "to": [
                68,
                -1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre0ProfileRound0",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre0Profile1",
              "to": [
                68,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre0ProfileRound1",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre0Profile2",
              "to": [
                14,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre0ProfileRound2",
              "radius": 1.55
            },
            {
              "type": "close",
              "id": "louvre0ProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "louvre0ProfileRoundStart",
              "radius": 1.55
            }
          ]
        },
        {
          "id": "louvre0",
          "type": "extrude",
          "profile": "louvre0Profile",
          "distance": 6
        },
        {
          "id": "louvre1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                96.370812,
                136.353965
              ],
              "normal": [
                0,
                -0.848048,
                -0.529919
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14,
            -1.6
          ],
          "pen": [
            {
              "type": "line",
              "id": "louvre1Profile0",
              "to": [
                68,
                -1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre1ProfileRound0",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre1Profile1",
              "to": [
                68,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre1ProfileRound1",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre1Profile2",
              "to": [
                14,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre1ProfileRound2",
              "radius": 1.55
            },
            {
              "type": "close",
              "id": "louvre1ProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "louvre1ProfileRoundStart",
              "radius": 1.55
            }
          ]
        },
        {
          "id": "louvre1",
          "type": "extrude",
          "profile": "louvre1Profile",
          "distance": 6
        },
        {
          "id": "louvre2Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                89.091661,
                143.891747
              ],
              "normal": [
                0,
                -0.559193,
                -0.829038
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14,
            -1.6
          ],
          "pen": [
            {
              "type": "line",
              "id": "louvre2Profile0",
              "to": [
                68,
                -1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre2ProfileRound0",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre2Profile1",
              "to": [
                68,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre2ProfileRound1",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre2Profile2",
              "to": [
                14,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre2ProfileRound2",
              "radius": 1.55
            },
            {
              "type": "close",
              "id": "louvre2ProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "louvre2ProfileRoundStart",
              "radius": 1.55
            }
          ]
        },
        {
          "id": "louvre2",
          "type": "extrude",
          "profile": "louvre2Profile",
          "distance": 6
        },
        {
          "id": "louvre3Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                79.375934,
                147.817155
              ],
              "normal": [
                0,
                -0.173648,
                -0.984808
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14,
            -1.6
          ],
          "pen": [
            {
              "type": "line",
              "id": "louvre3Profile0",
              "to": [
                68,
                -1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre3ProfileRound0",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre3Profile1",
              "to": [
                68,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre3ProfileRound1",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre3Profile2",
              "to": [
                14,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre3ProfileRound2",
              "radius": 1.55
            },
            {
              "type": "close",
              "id": "louvre3ProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "louvre3ProfileRoundStart",
              "radius": 1.55
            }
          ]
        },
        {
          "id": "louvre3",
          "type": "extrude",
          "profile": "louvre3Profile",
          "distance": 6
        },
        {
          "id": "louvre4Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                68.903568,
                147.451452
              ],
              "normal": [
                0,
                0.241922,
                -0.970296
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14,
            -1.6
          ],
          "pen": [
            {
              "type": "line",
              "id": "louvre4Profile0",
              "to": [
                68,
                -1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre4ProfileRound0",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre4Profile1",
              "to": [
                68,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre4ProfileRound1",
              "radius": 1.55
            },
            {
              "type": "line",
              "id": "louvre4Profile2",
              "to": [
                14,
                1.6
              ]
            },
            {
              "type": "filletCorner",
              "id": "louvre4ProfileRound2",
              "radius": 1.55
            },
            {
              "type": "close",
              "id": "louvre4ProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "louvre4ProfileRoundStart",
              "radius": 1.55
            }
          ]
        },
        {
          "id": "louvre4",
          "type": "extrude",
          "profile": "louvre4Profile",
          "distance": 6
        },
        {
          "id": "louvred",
          "type": "boolean",
          "operation": "difference",
          "body": "flange",
          "tools": [
            "louvre0",
            "louvre1",
            "louvre2",
            "louvre3",
            "louvre4"
          ]
        }
      ],
      "parts": [
        {
          "id": "exhaust",
          "name": "Exhaust",
          "body": "flange",
          "material": "exhaust",
          "appearance": {
            "faces": [
              {
                "faces": {
                  "of": "shield",
                  "role": "side"
                },
                "color": "#2b2d30",
                "metallic": 0.55,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "shield",
                  "role": "start"
                },
                "color": "#2b2d30",
                "metallic": 0.55,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "shield",
                  "role": "end"
                },
                "color": "#2b2d30",
                "metallic": 0.55,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "tab0",
                  "role": "side"
                },
                "color": "#2b2d30",
                "metallic": 0.55,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "tab0",
                  "role": "start"
                },
                "color": "#2b2d30",
                "metallic": 0.55,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "tab0",
                  "role": "end"
                },
                "color": "#2b2d30",
                "metallic": 0.55,
                "roughness": 0.5
              }
            ]
          },
          "properties": {
            "partNumber": "ENG-160"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "flange",
                "role": "end"
              },
              "origin": [
                41,
                0,
                123
              ]
            },
            {
              "id": "screws",
              "on": {
                "of": "flange",
                "role": "start"
              },
              "axis": {
                "of": "screwHoles",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000001a",
      "up": "z",
      "meta": {
        "name": "Carburettor",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "flangeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -37.6,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "start": [
                58.441005,
                106.584937
              ],
              "pen": [
                {
                  "type": "line",
                  "id": "flangeSide0",
                  "to": [
                    49.224376,
                    131.7384
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRound0",
                  "radius": 8
                },
                {
                  "type": "line",
                  "id": "flangeSide1",
                  "to": [
                    23.558995,
                    139.415063
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRound1",
                  "radius": 5.5
                },
                {
                  "type": "line",
                  "id": "flangeSide2",
                  "to": [
                    32.775624,
                    114.2616
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRound2",
                  "radius": 8
                },
                {
                  "type": "close",
                  "id": "flangeSideClose"
                },
                {
                  "type": "filletCorner",
                  "id": "flangeRoundStart",
                  "radius": 5.5
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "flangeBore",
                  "centre": [
                    41,
                    123
                  ],
                  "radius": 6.5
                }
              ]
            }
          ]
        },
        {
          "id": "flange",
          "type": "extrude",
          "profile": "flangeProfile",
          "distance": 5
        },
        {
          "id": "flangeRound",
          "type": "fillet",
          "body": "flange",
          "edges": {
            "between": [
              {
                "of": "flange",
                "role": "end"
              },
              {
                "of": "flange",
                "role": "side"
              }
            ],
            "count": 9
          },
          "radius": 0.8
        },
        {
          "id": "screwHoles",
          "type": "hole",
          "body": "flange",
          "on": {
            "of": "flange",
            "role": "end"
          },
          "at": [
            {
              "id": "low",
              "x": 49.5,
              "y": 115
            },
            {
              "id": "high",
              "x": 32.5,
              "y": 131
            }
          ],
          "fastener": {
            "size": "M4",
            "fit": "normal"
          },
          "depth": 5
        },
        {
          "id": "bodyProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                41,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -42.6,
            129.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "bodyProfile0",
              "to": [
                -42.6,
                131
              ]
            },
            {
              "type": "line",
              "id": "bodyProfile1",
              "to": [
                -50,
                131
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "bodyProfile2",
              "to": [
                -50,
                137
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound2",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "bodyProfile3",
              "to": [
                -53,
                137
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound3",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "bodyProfile4",
              "to": [
                -53,
                134.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound4",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "bodyProfile5",
              "to": [
                -75,
                134.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound5",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "bodyProfile6",
              "to": [
                -75,
                138
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound6",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "bodyProfile7",
              "to": [
                -78,
                138
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound7",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "bodyProfile8",
              "to": [
                -78,
                131.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound8",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "bodyProfile9",
              "to": [
                -74,
                131.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound9",
              "radius": 3
            },
            {
              "type": "line",
              "id": "bodyProfile10",
              "to": [
                -64,
                128
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound10",
              "radius": 6
            },
            {
              "type": "line",
              "id": "bodyProfile11",
              "to": [
                -55,
                129.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bodyProfileRound11",
              "radius": 6
            },
            {
              "type": "close",
              "id": "bodyProfileClose"
            }
          ]
        },
        {
          "id": "body",
          "type": "revolve",
          "profile": "bodyProfile",
          "axis": {
            "origin": [
              41,
              0,
              123
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "bowlProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -61.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            41,
            91.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "bowlProfile0",
              "to": [
                44.5,
                91.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bowlProfileRound0",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "bowlProfile1",
              "to": [
                44.5,
                95.5
              ]
            },
            {
              "type": "line",
              "id": "bowlProfile2",
              "to": [
                55,
                95.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bowlProfileRound2",
              "radius": 4
            },
            {
              "type": "line",
              "id": "bowlProfile3",
              "to": [
                55,
                103.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "bowlProfileRound3",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "bowlProfile4",
              "to": [
                56.2,
                104.1
              ]
            },
            {
              "type": "filletCorner",
              "id": "bowlProfileRound4",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "bowlProfile5",
              "to": [
                56.2,
                105.9
              ]
            },
            {
              "type": "filletCorner",
              "id": "bowlProfileRound5",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "bowlProfile6",
              "to": [
                54,
                106.5
              ]
            },
            {
              "type": "line",
              "id": "bowlProfile7",
              "to": [
                54,
                116
              ]
            },
            {
              "type": "line",
              "id": "bowlProfile8",
              "to": [
                41,
                116
              ]
            },
            {
              "type": "close",
              "id": "bowlProfileClose"
            }
          ]
        },
        {
          "id": "bowl",
          "type": "revolve",
          "profile": "bowlProfile",
          "axis": {
            "origin": [
              41,
              -61.5,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        },
        {
          "id": "throttleBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                50,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "throttleBossProfileRim",
              "centre": [
                -58,
                123
              ],
              "radius": 3.5
            }
          ]
        },
        {
          "id": "throttleBoss",
          "type": "extrude",
          "profile": "throttleBossProfile",
          "distance": 7.5
        },
        {
          "id": "throttleLeverProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                57,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -62,
            106
          ],
          "pen": [
            {
              "type": "line",
              "id": "throttleLeverProfile0",
              "to": [
                -54,
                106
              ]
            },
            {
              "type": "filletCorner",
              "id": "throttleLeverProfileRound0",
              "radius": 3.9
            },
            {
              "type": "line",
              "id": "throttleLeverProfile1",
              "to": [
                -54,
                127
              ]
            },
            {
              "type": "filletCorner",
              "id": "throttleLeverProfileRound1",
              "radius": 3.9
            },
            {
              "type": "line",
              "id": "throttleLeverProfile2",
              "to": [
                -62,
                127
              ]
            },
            {
              "type": "filletCorner",
              "id": "throttleLeverProfileRound2",
              "radius": 3.9
            },
            {
              "type": "close",
              "id": "throttleLeverProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "throttleLeverProfileRoundStart",
              "radius": 3.9
            }
          ]
        },
        {
          "id": "throttleLever",
          "type": "extrude",
          "profile": "throttleLeverProfile",
          "distance": 2
        },
        {
          "id": "throttleLeverRound",
          "type": "fillet",
          "body": "throttleLever",
          "edges": {
            "between": [
              {
                "of": "throttleLever",
                "role": "end"
              },
              {
                "of": "throttleLever",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 0.6
        },
        {
          "id": "chokeBossProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                24.5,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "chokeBossProfileRim",
              "centre": [
                -70,
                123
              ],
              "radius": 3.5
            }
          ]
        },
        {
          "id": "chokeBoss",
          "type": "extrude",
          "profile": "chokeBossProfile",
          "distance": 7.5
        },
        {
          "id": "chokeLeverProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                23,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -74,
            119
          ],
          "pen": [
            {
              "type": "line",
              "id": "chokeLeverProfile0",
              "to": [
                -66,
                119
              ]
            },
            {
              "type": "filletCorner",
              "id": "chokeLeverProfileRound0",
              "radius": 3.9
            },
            {
              "type": "line",
              "id": "chokeLeverProfile1",
              "to": [
                -66,
                138
              ]
            },
            {
              "type": "filletCorner",
              "id": "chokeLeverProfileRound1",
              "radius": 3.9
            },
            {
              "type": "line",
              "id": "chokeLeverProfile2",
              "to": [
                -74,
                138
              ]
            },
            {
              "type": "filletCorner",
              "id": "chokeLeverProfileRound2",
              "radius": 3.9
            },
            {
              "type": "close",
              "id": "chokeLeverProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "chokeLeverProfileRoundStart",
              "radius": 3.9
            }
          ]
        },
        {
          "id": "chokeLever",
          "type": "extrude",
          "profile": "chokeLeverProfile",
          "distance": 2
        },
        {
          "id": "chokeLeverRound",
          "type": "fillet",
          "body": "chokeLever",
          "edges": {
            "between": [
              {
                "of": "chokeLever",
                "role": "start"
              },
              {
                "of": "chokeLever",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 0.6
        },
        {
          "id": "fuelNippleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                19,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "fuelNippleProfileRim",
              "centre": [
                -61.5,
                103
              ],
              "radius": 2.4
            }
          ]
        },
        {
          "id": "fuelNipple",
          "type": "extrude",
          "profile": "fuelNippleProfile",
          "distance": 10
        },
        {
          "id": "fuelNippleRound",
          "type": "fillet",
          "body": "fuelNipple",
          "edges": {
            "between": [
              {
                "of": "fuelNipple",
                "role": "start"
              },
              {
                "of": "fuelNipple",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.5
        },
        {
          "id": "fuelBeadProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                22,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "fuelBeadProfileRim",
              "centre": [
                -61.5,
                103
              ],
              "radius": 3.1
            }
          ]
        },
        {
          "id": "fuelBead",
          "type": "extrude",
          "profile": "fuelBeadProfile",
          "distance": 1.2
        },
        {
          "id": "idleScrewProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 132
          },
          "pen": [
            {
              "type": "circle",
              "id": "idleScrewProfileRim",
              "centre": [
                41,
                -68
              ],
              "radius": 2.4
            }
          ]
        },
        {
          "id": "idleScrew",
          "type": "extrude",
          "profile": "idleScrewProfile",
          "distance": 7
        },
        {
          "id": "idleHeadProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 137
          },
          "pen": [
            {
              "type": "circle",
              "id": "idleHeadProfileRim",
              "centre": [
                41,
                -68
              ],
              "radius": 3.4
            }
          ]
        },
        {
          "id": "idleHead",
          "type": "extrude",
          "profile": "idleHeadProfile",
          "distance": 2.4
        },
        {
          "id": "idleHeadRound",
          "type": "fillet",
          "body": "idleHead",
          "edges": {
            "between": [
              {
                "of": "idleHead",
                "role": "end"
              },
              {
                "of": "idleHead",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "cast",
          "type": "boolean",
          "operation": "union",
          "body": "flange",
          "tools": [
            "body",
            "bowl",
            "throttleBoss",
            "throttleLever",
            "chokeBoss",
            "chokeLever",
            "fuelNipple",
            "fuelBead",
            "idleScrew",
            "idleHead"
          ]
        },
        {
          "id": "throttleHole",
          "type": "hole",
          "body": "flange",
          "on": {
            "of": "throttleLever",
            "role": "end"
          },
          "direction": [
            0,
            1,
            0
          ],
          "at": [
            {
              "id": "link",
              "x": -58,
              "y": 110
            }
          ],
          "diameter": 2.2
        }
      ],
      "parts": [
        {
          "id": "carburettor",
          "name": "Carburettor",
          "body": "flange",
          "material": "aluminium",
          "properties": {
            "partNumber": "ENG-170"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "flange",
                "role": "start"
              },
              "origin": [
                41,
                0,
                123
              ]
            },
            {
              "id": "screws",
              "on": {
                "of": "flange",
                "role": "end"
              },
              "axis": {
                "of": "screwHoles",
                "role": "wall"
              }
            },
            {
              "id": "outlet",
              "on": {
                "of": "body",
                "role": "side",
                "from": "bodyProfile.bodyProfile8"
              },
              "origin": [
                41,
                0,
                123
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000001e",
      "up": "z",
      "meta": {
        "name": "Air cleaner",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "housingProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                41,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -78,
            123
          ],
          "pen": [
            {
              "type": "line",
              "id": "housingProfile0",
              "to": [
                -78,
                139
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound0",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "housingProfile1",
              "to": [
                -80,
                141
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "housingProfile2",
              "to": [
                -80,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound2",
              "radius": 2
            },
            {
              "type": "line",
              "id": "housingProfile3",
              "to": [
                -82,
                153
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound3",
              "radius": 1.2
            },
            {
              "type": "line",
              "id": "housingProfile4",
              "to": [
                -99,
                153
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound4",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "housingProfile5",
              "to": [
                -99.5,
                154.4
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound5",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "housingProfile6",
              "to": [
                -101.5,
                154.4
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound6",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "housingProfile7",
              "to": [
                -102,
                153
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound7",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "housingProfile8",
              "to": [
                -104,
                151
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound8",
              "radius": 4
            },
            {
              "type": "line",
              "id": "housingProfile9",
              "to": [
                -106,
                141
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound9",
              "radius": 3
            },
            {
              "type": "line",
              "id": "housingProfile10",
              "to": [
                -106.5,
                131
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound10",
              "radius": 1
            },
            {
              "type": "line",
              "id": "housingProfile11",
              "to": [
                -109,
                130
              ]
            },
            {
              "type": "filletCorner",
              "id": "housingProfileRound11",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "housingProfile12",
              "to": [
                -109,
                123
              ]
            },
            {
              "type": "close",
              "id": "housingProfileClose"
            }
          ]
        },
        {
          "id": "housing",
          "type": "revolve",
          "profile": "housingProfile",
          "axis": {
            "origin": [
              41,
              0,
              123
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "ribProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                39.8,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -103.5,
            132
          ],
          "pen": [
            {
              "type": "line",
              "id": "ribProfile0",
              "to": [
                -103.5,
                149
              ]
            },
            {
              "type": "line",
              "id": "ribProfile1",
              "to": [
                -105.6,
                149
              ]
            },
            {
              "type": "filletCorner",
              "id": "ribProfileRound1",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "ribProfile2",
              "to": [
                -107.6,
                138
              ]
            },
            {
              "type": "filletCorner",
              "id": "ribProfileRound2",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "ribProfile3",
              "to": [
                -108,
                132
              ]
            },
            {
              "type": "close",
              "id": "ribProfileClose"
            }
          ]
        },
        {
          "id": "rib",
          "type": "extrude",
          "profile": "ribProfile",
          "distance": 2.4
        },
        {
          "id": "ribs",
          "type": "polarPattern",
          "body": "rib",
          "axis": {
            "origin": [
              41,
              0,
              123
            ],
            "direction": [
              0,
              1,
              0
            ]
          },
          "count": 8
        },
        {
          "id": "ribbed",
          "type": "boolean",
          "operation": "union",
          "body": "housing",
          "tools": [
            "rib"
          ]
        }
      ],
      "parts": [
        {
          "id": "airFilter",
          "name": "Air cleaner",
          "body": "housing",
          "material": "pressed",
          "properties": {
            "partNumber": "ENG-171"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "housing",
                "role": "side",
                "from": "housingProfile.housingProfile0"
              },
              "origin": [
                41,
                0,
                123
              ]
            },
            {
              "id": "nut",
              "on": {
                "of": "housing",
                "role": "side",
                "from": "housingProfile.housingProfile12"
              },
              "origin": [
                41,
                0,
                123
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000001f",
      "up": "z",
      "meta": {
        "name": "Wing nut",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "nutProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                41,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -109,
            123
          ],
          "pen": [
            {
              "type": "line",
              "id": "nutProfile0",
              "to": [
                -109,
                129
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound0",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "nutProfile1",
              "to": [
                -117,
                127.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "nutProfileRound1",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "nutProfile2",
              "to": [
                -117,
                123
              ]
            },
            {
              "type": "close",
              "id": "nutProfileClose"
            }
          ]
        },
        {
          "id": "nut",
          "type": "revolve",
          "profile": "nutProfile",
          "axis": {
            "origin": [
              41,
              0,
              123
            ],
            "direction": [
              0,
              1,
              0
            ]
          }
        },
        {
          "id": "wingProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                122
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            29,
            -114
          ],
          "pen": [
            {
              "type": "line",
              "id": "wingProfile0",
              "to": [
                53,
                -114
              ]
            },
            {
              "type": "line",
              "id": "wingProfile1",
              "to": [
                56,
                -122
              ]
            },
            {
              "type": "filletCorner",
              "id": "wingProfileRound1",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "wingProfile2",
              "to": [
                50,
                -123
              ]
            },
            {
              "type": "filletCorner",
              "id": "wingProfileRound2",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "wingProfile3",
              "to": [
                45,
                -117
              ]
            },
            {
              "type": "filletCorner",
              "id": "wingProfileRound3",
              "radius": 2
            },
            {
              "type": "line",
              "id": "wingProfile4",
              "to": [
                37,
                -117
              ]
            },
            {
              "type": "filletCorner",
              "id": "wingProfileRound4",
              "radius": 2
            },
            {
              "type": "line",
              "id": "wingProfile5",
              "to": [
                32,
                -123
              ]
            },
            {
              "type": "filletCorner",
              "id": "wingProfileRound5",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "wingProfile6",
              "to": [
                26,
                -122
              ]
            },
            {
              "type": "filletCorner",
              "id": "wingProfileRound6",
              "radius": 2.5
            },
            {
              "type": "close",
              "id": "wingProfileClose"
            }
          ]
        },
        {
          "id": "wing",
          "type": "extrude",
          "profile": "wingProfile",
          "distance": 2
        },
        {
          "id": "wingRound",
          "type": "fillet",
          "body": "wing",
          "edges": {
            "between": [
              {
                "of": "wing",
                "role": "end"
              },
              {
                "of": "wing",
                "role": "side"
              }
            ],
            "count": 14
          },
          "radius": 0.6
        },
        {
          "id": "cast",
          "type": "boolean",
          "operation": "union",
          "body": "nut",
          "tools": [
            "wing"
          ]
        }
      ],
      "parts": [
        {
          "id": "wingNut",
          "name": "Wing nut",
          "body": "nut",
          "material": "steel",
          "properties": {
            "partNumber": "DIN 315 M6"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "nut",
                "role": "side",
                "from": "nutProfile.nutProfile0"
              },
              "origin": [
                41,
                0,
                123
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000019",
      "up": "z",
      "meta": {
        "name": "Ignition coil",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "bracketProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -40,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -48.083261,
            22.627417
          ],
          "pen": [
            {
              "type": "line",
              "id": "bracketProfile0",
              "to": [
                -31.112698,
                39.59798
              ]
            },
            {
              "type": "filletCorner",
              "id": "bracketProfileRound0",
              "radius": 6
            },
            {
              "type": "line",
              "id": "bracketProfile1",
              "to": [
                -35.355339,
                66.468037
              ]
            },
            {
              "type": "filletCorner",
              "id": "bracketProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "bracketProfile2",
              "to": [
                -49.497475,
                80.610173
              ]
            },
            {
              "type": "filletCorner",
              "id": "bracketProfileRound2",
              "radius": 3
            },
            {
              "type": "line",
              "id": "bracketProfile3",
              "to": [
                -80.610173,
                49.497475
              ]
            },
            {
              "type": "filletCorner",
              "id": "bracketProfileRound3",
              "radius": 3
            },
            {
              "type": "line",
              "id": "bracketProfile4",
              "to": [
                -66.468037,
                35.355339
              ]
            },
            {
              "type": "filletCorner",
              "id": "bracketProfileRound4",
              "radius": 4
            },
            {
              "type": "close",
              "id": "bracketProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "bracketProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "bracket",
          "type": "extrude",
          "profile": "bracketProfile",
          "distance": 1.5
        },
        {
          "id": "mountHoles",
          "type": "hole",
          "body": "bracket",
          "on": {
            "of": "bracket",
            "role": "end"
          },
          "at": [
            {
              "id": "upper",
              "x": -40.305087,
              "y": 40.305087
            },
            {
              "id": "lower",
              "x": -48.790368,
              "y": 31.819805
            }
          ],
          "diameter": 4.5,
          "depth": 1.5
        },
        {
          "id": "spacer0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -41,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "spacer0ProfileRim",
              "centre": [
                -72.831998,
                51.618795
              ],
              "radius": 4
            }
          ]
        },
        {
          "id": "spacer0",
          "type": "extrude",
          "profile": "spacer0Profile",
          "distance": 6.5
        },
        {
          "id": "spacer1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -41,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "spacer1ProfileRim",
              "centre": [
                -51.618795,
                72.831998
              ],
              "radius": 4
            }
          ]
        },
        {
          "id": "spacer1",
          "type": "extrude",
          "profile": "spacer1Profile",
          "distance": 6.5
        },
        {
          "id": "coreProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -47,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -60.542351,
            32.25808
          ],
          "pen": [
            {
              "type": "threePointArc",
              "id": "coreLegA",
              "through": [
                -57.940311,
                36.727107
              ],
              "to": [
                -55.060441,
                40.918306
              ]
            },
            {
              "type": "line",
              "id": "coreInnerA",
              "to": [
                -66.468037,
                52.325902
              ]
            },
            {
              "type": "filletCorner",
              "id": "coreInnerRoundA",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "coreBridge",
              "to": [
                -52.325902,
                66.468037
              ]
            },
            {
              "type": "filletCorner",
              "id": "coreInnerRoundB",
              "radius": 1.5
            },
            {
              "type": "line",
              "id": "coreInnerB",
              "to": [
                -40.918306,
                55.060441
              ]
            },
            {
              "type": "threePointArc",
              "id": "coreLegB",
              "through": [
                -36.727107,
                57.940311
              ],
              "to": [
                -32.25808,
                60.542351
              ]
            },
            {
              "type": "line",
              "id": "coreOuterB",
              "to": [
                -50.911688,
                79.195959
              ]
            },
            {
              "type": "filletCorner",
              "id": "coreTopRoundB",
              "radius": 2
            },
            {
              "type": "line",
              "id": "coreTop",
              "to": [
                -79.195959,
                50.911688
              ]
            },
            {
              "type": "filletCorner",
              "id": "coreTopRoundA",
              "radius": 2
            },
            {
              "type": "close",
              "id": "coreOuterA"
            }
          ]
        },
        {
          "id": "core",
          "type": "extrude",
          "profile": "coreProfile",
          "distance": 12
        },
        {
          "id": "coreScrewHoles",
          "type": "hole",
          "body": "core",
          "on": {
            "of": "core",
            "role": "end"
          },
          "at": [
            {
              "id": "screw0",
              "x": -72.831998,
              "y": 51.618795
            },
            {
              "id": "screw1",
              "x": -51.618795,
              "y": 72.831998
            }
          ],
          "diameter": 4.1,
          "depth": 12
        },
        {
          "id": "rivet0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -58.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet0ProfileRim",
              "centre": [
                -65.760931,
                58.689863
              ],
              "radius": 1.6
            }
          ]
        },
        {
          "id": "rivet0",
          "type": "extrude",
          "profile": "rivet0Profile",
          "distance": 1.3
        },
        {
          "id": "rivet0Round",
          "type": "fillet",
          "body": "rivet0",
          "edges": {
            "between": [
              {
                "of": "rivet0",
                "role": "end"
              },
              {
                "of": "rivet0",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "rivet1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -58.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet1ProfileRim",
              "centre": [
                -58.689863,
                65.760931
              ],
              "radius": 1.6
            }
          ]
        },
        {
          "id": "rivet1",
          "type": "extrude",
          "profile": "rivet1Profile",
          "distance": 1.3
        },
        {
          "id": "rivet1Round",
          "type": "fillet",
          "body": "rivet1",
          "edges": {
            "between": [
              {
                "of": "rivet1",
                "role": "end"
              },
              {
                "of": "rivet1",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "rivet2Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -58.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet2ProfileRim",
              "centre": [
                -41.7193,
                62.932504
              ],
              "radius": 1.6
            }
          ]
        },
        {
          "id": "rivet2",
          "type": "extrude",
          "profile": "rivet2Profile",
          "distance": 1.3
        },
        {
          "id": "rivet2Round",
          "type": "fillet",
          "body": "rivet2",
          "edges": {
            "between": [
              {
                "of": "rivet2",
                "role": "end"
              },
              {
                "of": "rivet2",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "rivet3Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -58.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet3ProfileRim",
              "centre": [
                -45.961941,
                67.175144
              ],
              "radius": 1.6
            }
          ]
        },
        {
          "id": "rivet3",
          "type": "extrude",
          "profile": "rivet3Profile",
          "distance": 1.3
        },
        {
          "id": "rivet3Round",
          "type": "fillet",
          "body": "rivet3",
          "edges": {
            "between": [
              {
                "of": "rivet3",
                "role": "end"
              },
              {
                "of": "rivet3",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "coilProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -43,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -67.882251,
            32.526912
          ],
          "pen": [
            {
              "type": "line",
              "id": "coilProfile0",
              "to": [
                -53.740115,
                46.669048
              ]
            },
            {
              "type": "filletCorner",
              "id": "coilProfileRound0",
              "radius": 3
            },
            {
              "type": "line",
              "id": "coilProfile1",
              "to": [
                -61.51829,
                54.447222
              ]
            },
            {
              "type": "filletCorner",
              "id": "coilProfileRound1",
              "radius": 3
            },
            {
              "type": "line",
              "id": "coilProfile2",
              "to": [
                -75.660426,
                40.305087
              ]
            },
            {
              "type": "filletCorner",
              "id": "coilProfileRound2",
              "radius": 3
            },
            {
              "type": "close",
              "id": "coilProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "coilProfileRoundStart",
              "radius": 3
            }
          ]
        },
        {
          "id": "coil",
          "type": "extrude",
          "profile": "coilProfile",
          "distance": 20
        },
        {
          "id": "coilFrontRound",
          "type": "fillet",
          "body": "coil",
          "edges": {
            "between": [
              {
                "of": "coil",
                "role": "start"
              },
              {
                "of": "coil",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 2
        },
        {
          "id": "coilBackRound",
          "type": "fillet",
          "body": "coil",
          "edges": {
            "between": [
              {
                "of": "coil",
                "role": "end"
              },
              {
                "of": "coil",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 2
        },
        {
          "id": "terminalProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -62,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "terminalProfileRim",
              "centre": [
                -64.70027,
                43.487067
              ],
              "radius": 4
            }
          ]
        },
        {
          "id": "terminal",
          "type": "extrude",
          "profile": "terminalProfile",
          "distance": 8
        },
        {
          "id": "terminalRound",
          "type": "fillet",
          "body": "terminal",
          "edges": {
            "between": [
              {
                "of": "terminal",
                "role": "end"
              },
              {
                "of": "terminal",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1
        },
        {
          "id": "leadPath",
          "type": "operation",
          "operation": "occt.shapes.wire.interpolatePoints",
          "params": {
            "points": [
              [
                -64.70027,
                -69,
                43.487067
              ],
              [
                -68.235804,
                -75,
                47.022601
              ],
              [
                -80,
                -72,
                80
              ],
              [
                -70,
                -66,
                125
              ],
              [
                -40,
                -54,
                165
              ],
              [
                -8,
                -42,
                189
              ],
              [
                17,
                -32,
                188.1
              ],
              [
                18,
                -26,
                188
              ],
              [
                18,
                -20.6,
                188
              ]
            ],
            "periodic": false,
            "tolerance": 1e-7
          }
        },
        {
          "id": "lead",
          "type": "operation",
          "operation": "occt.operations.pipeWireCylindrical",
          "params": {
            "shape": {
              "body": "leadPath"
            },
            "radius": 3.2,
            "makeSolid": true
          }
        },
        {
          "id": "assembled",
          "type": "boolean",
          "operation": "union",
          "body": "bracket",
          "tools": [
            "spacer0",
            "spacer1",
            "core",
            "rivet0",
            "rivet1",
            "rivet2",
            "rivet3",
            "coil",
            "terminal",
            "lead"
          ]
        }
      ],
      "parts": [
        {
          "id": "ignition",
          "name": "Ignition coil",
          "body": "bracket",
          "material": "steel",
          "appearance": {
            "faces": [
              {
                "faces": {
                  "of": "coil",
                  "role": "side"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "coil",
                  "role": "start"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "coil",
                  "role": "end"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "coilFrontRound",
                  "role": "round"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "coilBackRound",
                  "role": "round"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "terminal",
                  "role": "side"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "terminal",
                  "role": "end"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "terminalRound",
                  "role": "round"
                },
                "color": "#1c1d1f",
                "metallic": 0,
                "roughness": 0.55
              },
              {
                "faces": {
                  "of": "lead",
                  "role": "side"
                },
                "color": "#8a1f17",
                "metallic": 0,
                "roughness": 0.6
              },
              {
                "faces": {
                  "of": "lead",
                  "role": "start"
                },
                "color": "#8a1f17",
                "metallic": 0,
                "roughness": 0.6
              },
              {
                "faces": {
                  "of": "lead",
                  "role": "end"
                },
                "color": "#8a1f17",
                "metallic": 0,
                "roughness": 0.6
              },
              {
                "faces": {
                  "of": "bracket",
                  "role": "side"
                },
                "color": "#2b2d30",
                "metallic": 0.6,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "bracket",
                  "role": "start"
                },
                "color": "#2b2d30",
                "metallic": 0.6,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "bracket",
                  "role": "end"
                },
                "color": "#2b2d30",
                "metallic": 0.6,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "spacer0",
                  "role": "side"
                },
                "color": "#2b2d30",
                "metallic": 0.6,
                "roughness": 0.5
              },
              {
                "faces": {
                  "of": "spacer1",
                  "role": "side"
                },
                "color": "#2b2d30",
                "metallic": 0.6,
                "roughness": 0.5
              }
            ]
          },
          "properties": {
            "partNumber": "ENG-180"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "bracket",
                "role": "start"
              },
              "origin": [
                -40.305087,
                0,
                40.305087
              ]
            },
            {
              "id": "screws",
              "on": {
                "of": "bracket",
                "role": "end"
              },
              "axis": {
                "of": "mountHoles",
                "role": "wall"
              }
            },
            {
              "id": "coreScrews",
              "on": {
                "of": "core",
                "role": "end",
                "filter": {
                  "select": "nearest",
                  "point": [
                    -62.225397,
                    -59,
                    62.225397
                  ]
                }
              },
              "axis": {
                "of": "coreScrewHoles",
                "role": "wall"
              }
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000001c",
      "up": "z",
      "meta": {
        "name": "Plug cap",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "capProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            23.6,
            178
          ],
          "pen": [
            {
              "type": "line",
              "id": "capProfile0",
              "to": [
                26,
                178
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound0",
              "radius": 0.8
            },
            {
              "type": "line",
              "id": "capProfile1",
              "to": [
                26,
                195
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound1",
              "radius": 3
            },
            {
              "type": "line",
              "id": "capProfile2",
              "to": [
                18,
                195
              ]
            },
            {
              "type": "line",
              "id": "capProfile3",
              "to": [
                18,
                191.05
              ]
            },
            {
              "type": "line",
              "id": "capProfile4",
              "to": [
                20.6,
                191.05
              ]
            },
            {
              "type": "line",
              "id": "capProfile5",
              "to": [
                20.6,
                185.5
              ]
            },
            {
              "type": "line",
              "id": "capProfile6",
              "to": [
                23.6,
                185.5
              ]
            },
            {
              "type": "close",
              "id": "capProfileClose"
            }
          ]
        },
        {
          "id": "cap",
          "type": "revolve",
          "profile": "capProfile",
          "axis": {
            "origin": [
              18,
              0,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        },
        {
          "id": "armProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -6,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "armProfileRim",
              "centre": [
                18,
                188
              ],
              "radius": 4.5
            }
          ]
        },
        {
          "id": "arm",
          "type": "extrude",
          "profile": "armProfile",
          "distance": 14
        },
        {
          "id": "armRound",
          "type": "fillet",
          "body": "arm",
          "edges": {
            "between": [
              {
                "of": "arm",
                "role": "end"
              },
              {
                "of": "arm",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1
        },
        {
          "id": "boot",
          "type": "boolean",
          "operation": "union",
          "body": "cap",
          "tools": [
            "arm"
          ]
        }
      ],
      "parts": [
        {
          "id": "plugCap",
          "name": "Plug cap",
          "body": "cap",
          "material": "rubber",
          "properties": {
            "partNumber": "ENG-181"
          },
          "connectors": [
            {
              "id": "terminal",
              "on": {
                "of": "cap",
                "role": "side",
                "from": "capProfile.capProfile4"
              },
              "origin": [
                18,
                0,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000020",
      "up": "z",
      "meta": {
        "name": "Oil filler cap",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "capProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                0,
                -12
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -56,
            12
          ],
          "pen": [
            {
              "type": "line",
              "id": "capProfile0",
              "to": [
                -56,
                19.95
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound0",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "capProfile1",
              "to": [
                -66,
                19.95
              ]
            },
            {
              "type": "line",
              "id": "capProfile2",
              "to": [
                -66,
                25
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound2",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "capProfile3",
              "to": [
                -72,
                25
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound3",
              "radius": 1.2
            },
            {
              "type": "line",
              "id": "capProfile4",
              "to": [
                -74,
                22
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound4",
              "radius": 2
            },
            {
              "type": "line",
              "id": "capProfile5",
              "to": [
                -74,
                12
              ]
            },
            {
              "type": "close",
              "id": "capProfileClose"
            }
          ]
        },
        {
          "id": "cap",
          "type": "revolve",
          "profile": "capProfile",
          "axis": {
            "origin": [
              0,
              12,
              -12
            ],
            "direction": [
              1,
              0,
              0
            ]
          }
        },
        {
          "id": "fluteProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                24,
                0
              ],
              "normal": [
                0,
                1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -71.5,
            10.8
          ],
          "pen": [
            {
              "type": "line",
              "id": "fluteProfile0",
              "to": [
                -66.5,
                10.8
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRound0",
              "radius": 1.15
            },
            {
              "type": "line",
              "id": "fluteProfile1",
              "to": [
                -66.5,
                13.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRound1",
              "radius": 1.15
            },
            {
              "type": "line",
              "id": "fluteProfile2",
              "to": [
                -71.5,
                13.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRound2",
              "radius": 1.15
            },
            {
              "type": "close",
              "id": "fluteProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRoundStart",
              "radius": 1.15
            }
          ]
        },
        {
          "id": "flute",
          "type": "extrude",
          "profile": "fluteProfile",
          "distance": 2
        },
        {
          "id": "flutes",
          "type": "polarPattern",
          "body": "flute",
          "axis": {
            "origin": [
              0,
              12,
              -12
            ],
            "direction": [
              1,
              0,
              0
            ]
          },
          "count": 12
        },
        {
          "id": "fluted",
          "type": "boolean",
          "operation": "difference",
          "body": "cap",
          "tools": [
            "flute"
          ]
        },
        {
          "id": "handleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -79,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            1,
            -13.5
          ],
          "pen": [
            {
              "type": "line",
              "id": "handleProfile0",
              "to": [
                23,
                -13.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "handleProfileRound0",
              "radius": 1.45
            },
            {
              "type": "line",
              "id": "handleProfile1",
              "to": [
                23,
                -10.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "handleProfileRound1",
              "radius": 1.45
            },
            {
              "type": "line",
              "id": "handleProfile2",
              "to": [
                1,
                -10.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "handleProfileRound2",
              "radius": 1.45
            },
            {
              "type": "close",
              "id": "handleProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "handleProfileRoundStart",
              "radius": 1.45
            }
          ]
        },
        {
          "id": "handle",
          "type": "extrude",
          "profile": "handleProfile",
          "distance": 6
        },
        {
          "id": "gripped",
          "type": "boolean",
          "operation": "union",
          "body": "cap",
          "tools": [
            "handle"
          ]
        }
      ],
      "parts": [
        {
          "id": "fillerCap",
          "name": "Oil filler cap",
          "body": "cap",
          "material": "resin",
          "properties": {
            "partNumber": "ENG-190"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "cap",
                "role": "side",
                "from": "capProfile.capProfile2"
              },
              "origin": [
                0,
                12,
                -12
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000021",
      "up": "z",
      "meta": {
        "name": "Drain plug",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "threadProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -62,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "threadProfileRim",
              "centre": [
                30,
                -26
              ],
              "radius": 4.95
            }
          ]
        },
        {
          "id": "thread",
          "type": "extrude",
          "profile": "threadProfile",
          "distance": 9.5
        },
        {
          "id": "collarProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -63.5,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "collarProfileRim",
              "centre": [
                30,
                -26
              ],
              "radius": 7.5
            }
          ]
        },
        {
          "id": "collar",
          "type": "extrude",
          "profile": "collarProfile",
          "distance": 1.5
        },
        {
          "id": "hexProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -68.7,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            36.5,
            -22.247223
          ],
          "pen": [
            {
              "type": "line",
              "id": "hexProfile0",
              "to": [
                30,
                -18.494447
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound0",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "hexProfile1",
              "to": [
                23.5,
                -22.247223
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound1",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "hexProfile2",
              "to": [
                23.5,
                -29.752777
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound2",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "hexProfile3",
              "to": [
                30,
                -33.505553
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound3",
              "radius": 0.6
            },
            {
              "type": "line",
              "id": "hexProfile4",
              "to": [
                36.5,
                -29.752777
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound4",
              "radius": 0.6
            },
            {
              "type": "close",
              "id": "hexProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRoundStart",
              "radius": 0.6
            }
          ]
        },
        {
          "id": "hex",
          "type": "extrude",
          "profile": "hexProfile",
          "distance": 5.2
        },
        {
          "id": "hexRound",
          "type": "fillet",
          "body": "hex",
          "edges": {
            "between": [
              {
                "of": "hex",
                "role": "start"
              },
              {
                "of": "hex",
                "role": "side"
              }
            ],
            "count": 12
          },
          "radius": 0.6
        },
        {
          "id": "plug",
          "type": "boolean",
          "operation": "union",
          "body": "collar",
          "tools": [
            "thread",
            "hex"
          ]
        }
      ],
      "parts": [
        {
          "id": "drainPlug",
          "name": "Drain plug",
          "body": "collar",
          "material": "steel",
          "properties": {
            "partNumber": "DIN 910 M10x1"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "collar",
                "role": "end"
              },
              "origin": [
                0,
                30,
                -26
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000022",
      "up": "z",
      "meta": {
        "name": "Nameplate",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "plateProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -58.8,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -30,
            14
          ],
          "pen": [
            {
              "type": "line",
              "id": "plateProfile0",
              "to": [
                2,
                14
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound0",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "plateProfile1",
              "to": [
                2,
                34
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound1",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "plateProfile2",
              "to": [
                -30,
                34
              ]
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRound2",
              "radius": 2.5
            },
            {
              "type": "close",
              "id": "plateProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "plateProfileRoundStart",
              "radius": 2.5
            }
          ]
        },
        {
          "id": "plate",
          "type": "extrude",
          "profile": "plateProfile",
          "distance": 0.8
        },
        {
          "id": "plateRound",
          "type": "fillet",
          "body": "plate",
          "edges": {
            "between": [
              {
                "of": "plate",
                "role": "start"
              },
              {
                "of": "plate",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 0.3
        },
        {
          "id": "panelProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -58.8,
                0,
                0
              ],
              "normal": [
                -1,
                0,
                0
              ],
              "direction": [
                0,
                -1,
                0
              ]
            }
          },
          "start": [
            4,
            18
          ],
          "pen": [
            {
              "type": "line",
              "id": "panelProfile0",
              "to": [
                24,
                18
              ]
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRound0",
              "radius": 1
            },
            {
              "type": "line",
              "id": "panelProfile1",
              "to": [
                24,
                30
              ]
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "panelProfile2",
              "to": [
                4,
                30
              ]
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRound2",
              "radius": 1
            },
            {
              "type": "close",
              "id": "panelProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "panelProfileRoundStart",
              "radius": 1
            }
          ]
        },
        {
          "id": "panel",
          "type": "extrude",
          "profile": "panelProfile",
          "distance": 0.3
        },
        {
          "id": "rivet0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -58.8,
                0,
                0
              ],
              "normal": [
                -1,
                0,
                0
              ],
              "direction": [
                0,
                -1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet0ProfileRim",
              "centre": [
                27.6,
                16.4
              ],
              "radius": 1.1
            }
          ]
        },
        {
          "id": "rivet0",
          "type": "extrude",
          "profile": "rivet0Profile",
          "distance": 0.7
        },
        {
          "id": "rivet0Round",
          "type": "fillet",
          "body": "rivet0",
          "edges": {
            "between": [
              {
                "of": "rivet0",
                "role": "end"
              },
              {
                "of": "rivet0",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.45
        },
        {
          "id": "rivet1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -58.8,
                0,
                0
              ],
              "normal": [
                -1,
                0,
                0
              ],
              "direction": [
                0,
                -1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet1ProfileRim",
              "centre": [
                0.4,
                16.4
              ],
              "radius": 1.1
            }
          ]
        },
        {
          "id": "rivet1",
          "type": "extrude",
          "profile": "rivet1Profile",
          "distance": 0.7
        },
        {
          "id": "rivet1Round",
          "type": "fillet",
          "body": "rivet1",
          "edges": {
            "between": [
              {
                "of": "rivet1",
                "role": "end"
              },
              {
                "of": "rivet1",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.45
        },
        {
          "id": "rivet2Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -58.8,
                0,
                0
              ],
              "normal": [
                -1,
                0,
                0
              ],
              "direction": [
                0,
                -1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet2ProfileRim",
              "centre": [
                0.4,
                31.6
              ],
              "radius": 1.1
            }
          ]
        },
        {
          "id": "rivet2",
          "type": "extrude",
          "profile": "rivet2Profile",
          "distance": 0.7
        },
        {
          "id": "rivet2Round",
          "type": "fillet",
          "body": "rivet2",
          "edges": {
            "between": [
              {
                "of": "rivet2",
                "role": "end"
              },
              {
                "of": "rivet2",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.45
        },
        {
          "id": "rivet3Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -58.8,
                0,
                0
              ],
              "normal": [
                -1,
                0,
                0
              ],
              "direction": [
                0,
                -1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "rivet3ProfileRim",
              "centre": [
                27.6,
                31.6
              ],
              "radius": 1.1
            }
          ]
        },
        {
          "id": "rivet3",
          "type": "extrude",
          "profile": "rivet3Profile",
          "distance": 0.7
        },
        {
          "id": "rivet3Round",
          "type": "fillet",
          "body": "rivet3",
          "edges": {
            "between": [
              {
                "of": "rivet3",
                "role": "end"
              },
              {
                "of": "rivet3",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.45
        },
        {
          "id": "riveted",
          "type": "boolean",
          "operation": "union",
          "body": "plate",
          "tools": [
            "panel",
            "rivet0",
            "rivet1",
            "rivet2",
            "rivet3"
          ]
        }
      ],
      "parts": [
        {
          "id": "nameplate",
          "name": "Nameplate",
          "body": "plate",
          "material": "brass",
          "properties": {
            "partNumber": "ENG-192"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "plate",
                "role": "end"
              },
              "origin": [
                0,
                -30,
                14
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000023",
      "up": "z",
      "meta": {
        "name": "Governor arm",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "shaftProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                56.5,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "shaftProfileRim",
              "centre": [
                0,
                -5
              ],
              "radius": 2.95
            }
          ]
        },
        {
          "id": "shaft",
          "type": "extrude",
          "profile": "shaftProfile",
          "distance": 15
        },
        {
          "id": "shaftRound",
          "type": "fillet",
          "body": "shaft",
          "edges": {
            "between": [
              {
                "of": "shaft",
                "role": "end"
              },
              {
                "of": "shaft",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.5
        },
        {
          "id": "washerProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                64,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "washerProfileRim",
              "centre": [
                0,
                -5
              ],
              "radius": 5
            }
          ]
        },
        {
          "id": "washer",
          "type": "extrude",
          "profile": "washerProfile",
          "distance": 1.2
        },
        {
          "id": "armProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                67,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            2.568158,
            -10.040294
          ],
          "pen": [
            {
              "type": "line",
              "id": "armProfile0",
              "to": [
                11.933468,
                22.666448
              ]
            },
            {
              "type": "filletCorner",
              "id": "armProfileRound0",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "armProfile1",
              "to": [
                6.607552,
                24.396943
              ]
            },
            {
              "type": "filletCorner",
              "id": "armProfileRound1",
              "radius": 2.5
            },
            {
              "type": "line",
              "id": "armProfile2",
              "to": [
                -5.040294,
                -7.568158
              ]
            },
            {
              "type": "filletCorner",
              "id": "armProfileRound2",
              "radius": 3.6
            },
            {
              "type": "close",
              "id": "armProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "armProfileRoundStart",
              "radius": 3.6
            }
          ]
        },
        {
          "id": "arm",
          "type": "extrude",
          "profile": "armProfile",
          "distance": 2.5
        },
        {
          "id": "armRound",
          "type": "fillet",
          "body": "arm",
          "edges": {
            "between": [
              {
                "of": "arm",
                "role": "end"
              },
              {
                "of": "arm",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 0.5
        },
        {
          "id": "lever",
          "type": "boolean",
          "operation": "union",
          "body": "washer",
          "tools": [
            "shaft",
            "arm"
          ]
        },
        {
          "id": "linkHoles",
          "type": "hole",
          "body": "washer",
          "on": {
            "of": "arm",
            "role": "end"
          },
          "direction": [
            0,
            1,
            0
          ],
          "at": [
            {
              "id": "link0",
              "x": 5.09878,
              "y": 10.692433
            },
            {
              "id": "link1",
              "x": 7.416408,
              "y": 17.825356
            }
          ],
          "diameter": 2.2,
          "depth": 2.5
        }
      ],
      "parts": [
        {
          "id": "governorArm",
          "name": "Governor arm",
          "body": "washer",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-193"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "washer",
                "role": "start"
              },
              "origin": [
                0,
                0,
                -5
              ]
            },
            {
              "id": "link",
              "on": {
                "of": "arm",
                "role": "end"
              },
              "origin": [
                0,
                7.416408,
                17.825356
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000024",
      "up": "z",
      "meta": {
        "name": "Flywheel magnet",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "magnetProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -47.1,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            14.90615,
            60.232958
          ],
          "pen": [
            {
              "type": "line",
              "id": "magnetProfileLead",
              "to": [
                16.323495,
                65.960185
              ]
            },
            {
              "type": "threePointArc",
              "id": "magnetProfileOuter",
              "through": [
                0,
                67.95
              ],
              "to": [
                -16.323495,
                65.960185
              ]
            },
            {
              "type": "line",
              "id": "magnetProfileTrail",
              "to": [
                -14.90615,
                60.232958
              ]
            },
            {
              "type": "threePointArc",
              "id": "magnetProfileInner",
              "through": [
                0,
                62.05
              ],
              "to": [
                14.90615,
                60.232958
              ]
            }
          ]
        },
        {
          "id": "magnet",
          "type": "extrude",
          "profile": "magnetProfile",
          "distance": 11.9
        }
      ],
      "parts": [
        {
          "id": "flywheelMagnet",
          "name": "Flywheel magnet",
          "body": "magnet",
          "material": "pressed",
          "properties": {
            "partNumber": "ENG-132"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "magnet",
                "role": "start"
              },
              "origin": [
                0,
                0,
                62
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000025",
      "up": "z",
      "meta": {
        "name": "Gaskets",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "headProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 137
          },
          "start": [
            -36,
            -36
          ],
          "pen": [
            {
              "type": "line",
              "id": "headProfile0",
              "to": [
                62,
                -36
              ]
            },
            {
              "type": "filletCorner",
              "id": "headProfileRound0",
              "radius": 10
            },
            {
              "type": "line",
              "id": "headProfile1",
              "to": [
                62,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "headProfileRound1",
              "radius": 10
            },
            {
              "type": "line",
              "id": "headProfile2",
              "to": [
                -36,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "headProfileRound2",
              "radius": 10
            },
            {
              "type": "close",
              "id": "headProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "headProfileRoundStart",
              "radius": 10
            }
          ]
        },
        {
          "id": "head",
          "type": "extrude",
          "profile": "headProfile",
          "distance": 0.8
        },
        {
          "id": "headBoreProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "pen": [
            {
              "type": "circle",
              "id": "headBoreProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 27
            }
          ]
        },
        {
          "id": "headBore",
          "type": "extrude",
          "profile": "headBoreProfile",
          "distance": 3
        },
        {
          "id": "headRunProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "start": [
            0,
            -26
          ],
          "pen": [
            {
              "type": "line",
              "id": "headRunProfile0",
              "to": [
                42,
                -26
              ]
            },
            {
              "type": "line",
              "id": "headRunProfile1",
              "to": [
                42,
                26
              ]
            },
            {
              "type": "line",
              "id": "headRunProfile2",
              "to": [
                0,
                26
              ]
            },
            {
              "type": "close",
              "id": "headRunProfileClose"
            }
          ]
        },
        {
          "id": "headRun",
          "type": "extrude",
          "profile": "headRunProfile",
          "distance": 3
        },
        {
          "id": "headInProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "pen": [
            {
              "type": "circle",
              "id": "headInProfileRim",
              "centre": [
                42,
                -14
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "headIn",
          "type": "extrude",
          "profile": "headInProfile",
          "distance": 3
        },
        {
          "id": "headExProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 136
          },
          "pen": [
            {
              "type": "circle",
              "id": "headExProfileRim",
              "centre": [
                42,
                14
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "headEx",
          "type": "extrude",
          "profile": "headExProfile",
          "distance": 3
        },
        {
          "id": "headCut",
          "type": "boolean",
          "operation": "difference",
          "body": "head",
          "tools": [
            "headBore",
            "headRun",
            "headIn",
            "headEx"
          ]
        },
        {
          "id": "headBolts",
          "type": "hole",
          "body": "head",
          "on": {
            "of": "head",
            "role": "end"
          },
          "at": [
            {
              "id": "rearLeft",
              "x": -28,
              "y": -28
            },
            {
              "id": "rearRight",
              "x": -28,
              "y": 28
            },
            {
              "id": "midLeft",
              "x": 14,
              "y": -31
            },
            {
              "id": "midRight",
              "x": 14,
              "y": 31
            },
            {
              "id": "frontLeft",
              "x": 54,
              "y": -30
            },
            {
              "id": "frontRight",
              "x": 54,
              "y": 30
            }
          ],
          "diameter": 7
        },
        {
          "id": "coverPlateProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                50.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -58,
            50
          ],
          "pen": [
            {
              "type": "line",
              "id": "coverPlateProfile0",
              "to": [
                -58,
                -40
              ]
            },
            {
              "type": "filletCorner",
              "id": "coverPlateProfileRound0",
              "radius": 14
            },
            {
              "type": "line",
              "id": "coverPlateProfile1",
              "to": [
                -40,
                -58
              ]
            },
            {
              "type": "filletCorner",
              "id": "coverPlateProfileRound1",
              "radius": 14
            },
            {
              "type": "line",
              "id": "coverPlateProfile2",
              "to": [
                40,
                -58
              ]
            },
            {
              "type": "filletCorner",
              "id": "coverPlateProfileRound2",
              "radius": 14
            },
            {
              "type": "line",
              "id": "coverPlateProfile3",
              "to": [
                58,
                -40
              ]
            },
            {
              "type": "filletCorner",
              "id": "coverPlateProfileRound3",
              "radius": 14
            },
            {
              "type": "line",
              "id": "coverPlateProfile4",
              "to": [
                58,
                50
              ]
            },
            {
              "type": "filletCorner",
              "id": "coverPlateProfileRound4",
              "radius": 6
            },
            {
              "type": "close",
              "id": "coverPlateProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "coverPlateProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "cover",
          "type": "extrude",
          "profile": "coverPlateProfile",
          "distance": 0.8
        },
        {
          "id": "coverRoundProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                50.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverRoundProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 50
            }
          ]
        },
        {
          "id": "coverRound",
          "type": "extrude",
          "profile": "coverRoundProfile",
          "distance": 0.8
        },
        {
          "id": "coverJoined",
          "type": "boolean",
          "operation": "union",
          "body": "cover",
          "tools": [
            "coverRound"
          ]
        },
        {
          "id": "coverCrankProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverCrankProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 40
            }
          ]
        },
        {
          "id": "coverCrank",
          "type": "extrude",
          "profile": "coverCrankProfile",
          "distance": 3
        },
        {
          "id": "coverGearProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverGearProfileRim",
              "centre": [
                42,
                42.848571
              ],
              "radius": 45
            }
          ]
        },
        {
          "id": "coverGear",
          "type": "extrude",
          "profile": "coverGearProfile",
          "distance": 3
        },
        {
          "id": "coverBoltlowerBackProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltlowerBackProfileRim",
              "centre": [
                -42,
                -42
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltlowerBack",
          "type": "extrude",
          "profile": "coverBoltlowerBackProfile",
          "distance": 3
        },
        {
          "id": "coverBoltupperBackProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltupperBackProfileRim",
              "centre": [
                -42,
                42
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltupperBack",
          "type": "extrude",
          "profile": "coverBoltupperBackProfile",
          "distance": 3
        },
        {
          "id": "coverBoltlowerFrontProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltlowerFrontProfileRim",
              "centre": [
                46,
                -42
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltlowerFront",
          "type": "extrude",
          "profile": "coverBoltlowerFrontProfile",
          "distance": 3
        },
        {
          "id": "coverBoltupperMiddleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltupperMiddleProfileRim",
              "centre": [
                -5.5,
                42.85
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltupperMiddle",
          "type": "extrude",
          "profile": "coverBoltupperMiddleProfile",
          "distance": 3
        },
        {
          "id": "coverBolteastProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBolteastProfileRim",
              "centre": [
                88,
                42.848571
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBolteast",
          "type": "extrude",
          "profile": "coverBolteastProfile",
          "distance": 3
        },
        {
          "id": "coverBoltnorthEastProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltnorthEastProfileRim",
              "centre": [
                65,
                82.685739
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltnorthEast",
          "type": "extrude",
          "profile": "coverBoltnorthEastProfile",
          "distance": 3
        },
        {
          "id": "coverBoltnorthProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltnorthProfileRim",
              "centre": [
                19,
                82.685739
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltnorth",
          "type": "extrude",
          "profile": "coverBoltnorthProfile",
          "distance": 3
        },
        {
          "id": "coverBoltsouthEastProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                51.8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "coverBoltsouthEastProfileRim",
              "centre": [
                65,
                3.011402
              ],
              "radius": 2.75
            }
          ]
        },
        {
          "id": "coverBoltsouthEast",
          "type": "extrude",
          "profile": "coverBoltsouthEastProfile",
          "distance": 3
        },
        {
          "id": "coverCut",
          "type": "boolean",
          "operation": "difference",
          "body": "cover",
          "tools": [
            "coverCrank",
            "coverGear",
            "coverBoltlowerBack",
            "coverBoltupperBack",
            "coverBoltlowerFront",
            "coverBoltupperMiddle",
            "coverBolteast",
            "coverBoltnorthEast",
            "coverBoltnorth",
            "coverBoltsouthEast"
          ]
        },
        {
          "id": "chestProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                60,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -26.5,
            74
          ],
          "pen": [
            {
              "type": "line",
              "id": "chestProfile0",
              "to": [
                26.5,
                74
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRound0",
              "radius": 6
            },
            {
              "type": "line",
              "id": "chestProfile1",
              "to": [
                26.5,
                110
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRound1",
              "radius": 6
            },
            {
              "type": "line",
              "id": "chestProfile2",
              "to": [
                -26.5,
                110
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRound2",
              "radius": 6
            },
            {
              "type": "close",
              "id": "chestProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "chestProfileRoundStart",
              "radius": 6
            }
          ]
        },
        {
          "id": "chest",
          "type": "extrude",
          "profile": "chestProfile",
          "distance": 0.6
        },
        {
          "id": "chestWindowProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                59,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -16,
            80
          ],
          "pen": [
            {
              "type": "line",
              "id": "chestWindowProfile0",
              "to": [
                16,
                80
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestWindowProfileRound0",
              "radius": 4
            },
            {
              "type": "line",
              "id": "chestWindowProfile1",
              "to": [
                16,
                104
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestWindowProfileRound1",
              "radius": 4
            },
            {
              "type": "line",
              "id": "chestWindowProfile2",
              "to": [
                -16,
                104
              ]
            },
            {
              "type": "filletCorner",
              "id": "chestWindowProfileRound2",
              "radius": 4
            },
            {
              "type": "close",
              "id": "chestWindowProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "chestWindowProfileRoundStart",
              "radius": 4
            }
          ]
        },
        {
          "id": "chestWindow",
          "type": "extrude",
          "profile": "chestWindowProfile",
          "distance": 3
        },
        {
          "id": "chestCut",
          "type": "boolean",
          "operation": "difference",
          "body": "chest",
          "tools": [
            "chestWindow"
          ]
        },
        {
          "id": "chestHoles",
          "type": "hole",
          "body": "chest",
          "on": {
            "of": "chest",
            "role": "end"
          },
          "at": [
            {
              "id": "left",
              "x": -21.5,
              "y": 92
            },
            {
              "id": "right",
              "x": 21.5,
              "y": 92
            }
          ],
          "diameter": 4.5
        },
        {
          "id": "exhaustProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                37.6,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "start": [
                58.441005,
                106.584937
              ],
              "pen": [
                {
                  "type": "line",
                  "id": "exhaustSide0",
                  "to": [
                    49.224376,
                    131.7384
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "exhaustRound0",
                  "radius": 8
                },
                {
                  "type": "line",
                  "id": "exhaustSide1",
                  "to": [
                    23.558995,
                    139.415063
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "exhaustRound1",
                  "radius": 5.5
                },
                {
                  "type": "line",
                  "id": "exhaustSide2",
                  "to": [
                    32.775624,
                    114.2616
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "exhaustRound2",
                  "radius": 8
                },
                {
                  "type": "close",
                  "id": "exhaustSideClose"
                },
                {
                  "type": "filletCorner",
                  "id": "exhaustRoundStart",
                  "radius": 5.5
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "exhaustBore",
                  "centre": [
                    41,
                    123
                  ],
                  "radius": 6.5
                }
              ]
            }
          ]
        },
        {
          "id": "exhaust",
          "type": "extrude",
          "profile": "exhaustProfile",
          "distance": 0.6
        },
        {
          "id": "exhaustHoles",
          "type": "hole",
          "body": "exhaust",
          "on": {
            "of": "exhaust",
            "role": "start"
          },
          "at": [
            {
              "id": "low",
              "x": 49.5,
              "y": -115
            },
            {
              "id": "high",
              "x": 32.5,
              "y": -131
            }
          ],
          "diameter": 4.5
        },
        {
          "id": "intakeProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -37,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "start": [
                58.441005,
                106.584937
              ],
              "pen": [
                {
                  "type": "line",
                  "id": "intakeSide0",
                  "to": [
                    49.224376,
                    131.7384
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "intakeRound0",
                  "radius": 8
                },
                {
                  "type": "line",
                  "id": "intakeSide1",
                  "to": [
                    23.558995,
                    139.415063
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "intakeRound1",
                  "radius": 5.5
                },
                {
                  "type": "line",
                  "id": "intakeSide2",
                  "to": [
                    32.775624,
                    114.2616
                  ]
                },
                {
                  "type": "filletCorner",
                  "id": "intakeRound2",
                  "radius": 8
                },
                {
                  "type": "close",
                  "id": "intakeSideClose"
                },
                {
                  "type": "filletCorner",
                  "id": "intakeRoundStart",
                  "radius": 5.5
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "intakeBore",
                  "centre": [
                    41,
                    123
                  ],
                  "radius": 6.5
                }
              ]
            }
          ]
        },
        {
          "id": "intake",
          "type": "extrude",
          "profile": "intakeProfile",
          "distance": 0.6
        },
        {
          "id": "intakeHoles",
          "type": "hole",
          "body": "intake",
          "on": {
            "of": "intake",
            "role": "start"
          },
          "at": [
            {
              "id": "low",
              "x": 49.5,
              "y": -115
            },
            {
              "id": "high",
              "x": 32.5,
              "y": -131
            }
          ],
          "diameter": 4.5
        }
      ],
      "parts": [
        {
          "id": "headGasket",
          "name": "Head gasket",
          "body": "head",
          "material": "copper",
          "properties": {
            "partNumber": "ENG-145"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "head",
                "role": "start"
              },
              "origin": [
                0,
                0,
                0
              ]
            },
            {
              "id": "top",
              "on": {
                "of": "head",
                "role": "end"
              },
              "origin": [
                0,
                0,
                0
              ]
            }
          ]
        },
        {
          "id": "coverGasket",
          "name": "Gear cover gasket",
          "body": "cover",
          "material": "gasket",
          "properties": {
            "partNumber": "ENG-146"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "cover",
                "role": "end"
              },
              "origin": [
                0,
                0,
                0
              ]
            },
            {
              "id": "top",
              "on": {
                "of": "cover",
                "role": "start"
              },
              "origin": [
                0,
                0,
                0
              ]
            }
          ]
        },
        {
          "id": "chestGasket",
          "name": "Valve chest gasket",
          "body": "chest",
          "material": "gasket",
          "properties": {
            "partNumber": "ENG-147"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "chest",
                "role": "start"
              },
              "origin": [
                60,
                0,
                92
              ]
            },
            {
              "id": "top",
              "on": {
                "of": "chest",
                "role": "end"
              },
              "origin": [
                60,
                0,
                92
              ]
            }
          ]
        },
        {
          "id": "exhaustGasket",
          "name": "Exhaust gasket",
          "body": "exhaust",
          "material": "gasket",
          "properties": {
            "partNumber": "ENG-148"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "exhaust",
                "role": "end"
              },
              "origin": [
                41,
                0,
                123
              ]
            },
            {
              "id": "top",
              "on": {
                "of": "exhaust",
                "role": "start"
              },
              "origin": [
                41,
                0,
                123
              ]
            }
          ]
        },
        {
          "id": "intakeGasket",
          "name": "Intake gasket",
          "body": "intake",
          "material": "gasket",
          "properties": {
            "partNumber": "ENG-149"
          },
          "connectors": [
            {
              "id": "bottom",
              "on": {
                "of": "intake",
                "role": "start"
              },
              "origin": [
                41,
                0,
                123
              ]
            },
            {
              "id": "top",
              "on": {
                "of": "intake",
                "role": "end"
              },
              "origin": [
                41,
                0,
                123
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000026",
      "up": "z",
      "meta": {
        "name": "Governor link",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "legAProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                66,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "legAProfileRim",
              "centre": [
                7.416408,
                17.825356
              ],
              "radius": 0.9
            }
          ]
        },
        {
          "id": "legA",
          "type": "extrude",
          "profile": "legAProfile",
          "distance": 5.5
        },
        {
          "id": "spanProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                71.5,
                7.416408,
                17.825356
              ],
              "normal": [
                -0.083754,
                -0.576726,
                0.812633
              ],
              "direction": [
                0.996486,
                -0.048474,
                0.068301
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "spanProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 0.9
            }
          ]
        },
        {
          "id": "span",
          "type": "extrude",
          "profile": "spanProfile",
          "distance": 113.427164
        },
        {
          "id": "legBProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                55.5,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "legBProfileRim",
              "centre": [
                -58,
                110
              ],
              "radius": 0.9
            }
          ]
        },
        {
          "id": "legB",
          "type": "extrude",
          "profile": "legBProfile",
          "distance": 6.5
        },
        {
          "id": "bendAJoint",
          "type": "operation",
          "operation": "occt.shapes.solid.createSphere",
          "params": {
            "radius": 0.9,
            "center": [
              71.5,
              7.416408,
              17.825356
            ]
          }
        },
        {
          "id": "bendBJoint",
          "type": "operation",
          "operation": "occt.shapes.solid.createSphere",
          "params": {
            "radius": 0.9,
            "center": [
              62,
              -58,
              110
            ]
          }
        },
        {
          "id": "clipAProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                69.55,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "clipAProfileRim",
              "centre": [
                7.416408,
                17.825356
              ],
              "radius": 2
            }
          ]
        },
        {
          "id": "clipA",
          "type": "extrude",
          "profile": "clipAProfile",
          "distance": 0.75
        },
        {
          "id": "clipBProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                56.2,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "clipBProfileRim",
              "centre": [
                -58,
                110
              ],
              "radius": 2
            }
          ]
        },
        {
          "id": "clipB",
          "type": "extrude",
          "profile": "clipBProfile",
          "distance": 0.75
        },
        {
          "id": "collar0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                64.227861,
                -42.659085,
                88.383965
              ],
              "normal": [
                -0.083754,
                -0.576726,
                0.812633
              ],
              "direction": [
                0.996486,
                -0.048474,
                0.068301
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "collar0ProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 2.6
            }
          ]
        },
        {
          "id": "collar0",
          "type": "extrude",
          "profile": "collar0Profile",
          "distance": 1.2
        },
        {
          "id": "collar1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                62.720286,
                -53.040155,
                103.011357
              ],
              "normal": [
                -0.083754,
                -0.576726,
                0.812633
              ],
              "direction": [
                0.996486,
                -0.048474,
                0.068301
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "collar1ProfileRim",
              "centre": [
                0,
                0
              ],
              "radius": 2.6
            }
          ]
        },
        {
          "id": "collar1",
          "type": "extrude",
          "profile": "collar1Profile",
          "distance": 1.2
        },
        {
          "id": "rod",
          "type": "boolean",
          "operation": "union",
          "body": "legA",
          "tools": [
            "span",
            "legB",
            "bendAJoint",
            "bendBJoint",
            "clipA",
            "clipB",
            "collar0",
            "collar1"
          ]
        }
      ],
      "parts": [
        {
          "id": "governorLink",
          "name": "Governor link",
          "body": "legA",
          "material": "steel",
          "properties": {
            "partNumber": "ENG-194"
          },
          "connectors": [
            {
              "id": "arm",
              "on": {
                "of": "clipA",
                "role": "start"
              },
              "origin": [
                0,
                7.416408,
                17.825356
              ]
            },
            {
              "id": "damper",
              "on": {
                "of": "collar0",
                "role": "end"
              },
              "origin": [
                64.177609,
                -43.005121,
                88.871545
              ],
              "direction": [
                0.996486,
                -0.048474,
                0.068301
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000027",
      "up": "z",
      "meta": {
        "name": "Fuel tank",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "tankProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 112
          },
          "start": [
            -114,
            -36
          ],
          "pen": [
            {
              "type": "line",
              "id": "tankProfile0",
              "to": [
                -56,
                -36
              ]
            },
            {
              "type": "filletCorner",
              "id": "tankProfileRound0",
              "radius": 10
            },
            {
              "type": "line",
              "id": "tankProfile1",
              "to": [
                -56,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "tankProfileRound1",
              "radius": 10
            },
            {
              "type": "line",
              "id": "tankProfile2",
              "to": [
                -114,
                36
              ]
            },
            {
              "type": "filletCorner",
              "id": "tankProfileRound2",
              "radius": 10
            },
            {
              "type": "close",
              "id": "tankProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "tankProfileRoundStart",
              "radius": 10
            }
          ]
        },
        {
          "id": "tank",
          "type": "extrude",
          "profile": "tankProfile",
          "distance": 38
        },
        {
          "id": "tankBottomRound",
          "type": "fillet",
          "body": "tank",
          "edges": {
            "between": [
              {
                "of": "tank",
                "role": "start"
              },
              {
                "of": "tank",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 7
        },
        {
          "id": "tankTopRound",
          "type": "fillet",
          "body": "tank",
          "edges": {
            "between": [
              {
                "of": "tank",
                "role": "end"
              },
              {
                "of": "tank",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 7
        },
        {
          "id": "seamProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 130.5
          },
          "start": [
            -115.2,
            -37.2
          ],
          "pen": [
            {
              "type": "line",
              "id": "seamProfile0",
              "to": [
                -54.8,
                -37.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "seamProfileRound0",
              "radius": 11.2
            },
            {
              "type": "line",
              "id": "seamProfile1",
              "to": [
                -54.8,
                37.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "seamProfileRound1",
              "radius": 11.2
            },
            {
              "type": "line",
              "id": "seamProfile2",
              "to": [
                -115.2,
                37.2
              ]
            },
            {
              "type": "filletCorner",
              "id": "seamProfileRound2",
              "radius": 11.2
            },
            {
              "type": "close",
              "id": "seamProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "seamProfileRoundStart",
              "radius": 11.2
            }
          ]
        },
        {
          "id": "seam",
          "type": "extrude",
          "profile": "seamProfile",
          "distance": 1
        },
        {
          "id": "neckProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 148
          },
          "pen": [
            {
              "type": "circle",
              "id": "neckProfileRim",
              "centre": [
                -90,
                8
              ],
              "radius": 13
            }
          ]
        },
        {
          "id": "neck",
          "type": "extrude",
          "profile": "neckProfile",
          "distance": 9
        },
        {
          "id": "neckRound",
          "type": "fillet",
          "body": "neck",
          "edges": {
            "between": [
              {
                "of": "neck",
                "role": "end"
              },
              {
                "of": "neck",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.8
        },
        {
          "id": "tapBossProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 108
          },
          "pen": [
            {
              "type": "circle",
              "id": "tapBossProfileRim",
              "centre": [
                -70,
                -18
              ],
              "radius": 6.5
            }
          ]
        },
        {
          "id": "tapBoss",
          "type": "extrude",
          "profile": "tapBossProfile",
          "distance": 6
        },
        {
          "id": "tapBossRound",
          "type": "fillet",
          "body": "tapBoss",
          "edges": {
            "between": [
              {
                "of": "tapBoss",
                "role": "start"
              },
              {
                "of": "tapBoss",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.8
        },
        {
          "id": "strut0Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                30,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -60,
            50
          ],
          "pen": [
            {
              "type": "line",
              "id": "strut0Profile0",
              "to": [
                -38,
                50
              ]
            },
            {
              "type": "line",
              "id": "strut0Profile1",
              "to": [
                -38,
                53
              ]
            },
            {
              "type": "filletCorner",
              "id": "strut0ProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "strut0Profile2",
              "to": [
                -57,
                53
              ]
            },
            {
              "type": "filletCorner",
              "id": "strut0ProfileRound2",
              "radius": 3
            },
            {
              "type": "line",
              "id": "strut0Profile3",
              "to": [
                -57,
                120
              ]
            },
            {
              "type": "line",
              "id": "strut0Profile4",
              "to": [
                -60,
                120
              ]
            },
            {
              "type": "close",
              "id": "strut0ProfileClose"
            }
          ]
        },
        {
          "id": "strut0",
          "type": "extrude",
          "profile": "strut0Profile",
          "distance": 12
        },
        {
          "id": "strut0Hole",
          "type": "hole",
          "body": "strut0",
          "on": {
            "of": "strut0",
            "role": "side",
            "from": "strut0Profile.strut0Profile2"
          },
          "at": [
            {
              "id": "foot",
              "x": -48,
              "y": 24
            }
          ],
          "diameter": 5.5,
          "depth": 3
        },
        {
          "id": "strut1Profile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -18,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -60,
            50
          ],
          "pen": [
            {
              "type": "line",
              "id": "strut1Profile0",
              "to": [
                -38,
                50
              ]
            },
            {
              "type": "line",
              "id": "strut1Profile1",
              "to": [
                -38,
                53
              ]
            },
            {
              "type": "filletCorner",
              "id": "strut1ProfileRound1",
              "radius": 1
            },
            {
              "type": "line",
              "id": "strut1Profile2",
              "to": [
                -57,
                53
              ]
            },
            {
              "type": "filletCorner",
              "id": "strut1ProfileRound2",
              "radius": 3
            },
            {
              "type": "line",
              "id": "strut1Profile3",
              "to": [
                -57,
                120
              ]
            },
            {
              "type": "line",
              "id": "strut1Profile4",
              "to": [
                -60,
                120
              ]
            },
            {
              "type": "close",
              "id": "strut1ProfileClose"
            }
          ]
        },
        {
          "id": "strut1",
          "type": "extrude",
          "profile": "strut1Profile",
          "distance": 12
        },
        {
          "id": "strut1Hole",
          "type": "hole",
          "body": "strut1",
          "on": {
            "of": "strut1",
            "role": "side",
            "from": "strut1Profile.strut1Profile2"
          },
          "at": [
            {
              "id": "foot",
              "x": -48,
              "y": -24
            }
          ],
          "diameter": 5.5,
          "depth": 3
        },
        {
          "id": "welded",
          "type": "boolean",
          "operation": "union",
          "body": "tank",
          "tools": [
            "seam",
            "neck",
            "tapBoss",
            "strut0",
            "strut1"
          ]
        },
        {
          "id": "tapHole",
          "type": "hole",
          "body": "tank",
          "on": {
            "of": "tapBoss",
            "role": "start"
          },
          "at": [
            {
              "id": "tap",
              "x": -70,
              "y": 18
            }
          ],
          "diameter": 6.1,
          "depth": 5
        }
      ],
      "parts": [
        {
          "id": "fuelTank",
          "name": "Fuel tank",
          "body": "tank",
          "material": "pressed",
          "properties": {
            "partNumber": "ENG-195"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "strut0",
                "role": "side",
                "from": "strut0Profile.strut0Profile0"
              },
              "origin": [
                -48,
                24,
                0
              ]
            },
            {
              "id": "screws0",
              "on": {
                "of": "strut0",
                "role": "side",
                "from": "strut0Profile.strut0Profile2"
              },
              "axis": {
                "of": "strut0Hole",
                "role": "wall"
              }
            },
            {
              "id": "screws1",
              "on": {
                "of": "strut1",
                "role": "side",
                "from": "strut1Profile.strut1Profile2"
              },
              "axis": {
                "of": "strut1Hole",
                "role": "wall"
              }
            },
            {
              "id": "tap",
              "on": {
                "of": "tapBoss",
                "role": "start"
              },
              "origin": [
                -70,
                -18,
                0
              ]
            },
            {
              "id": "neck",
              "on": {
                "of": "neck",
                "role": "end"
              },
              "origin": [
                -90,
                8,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000002a",
      "up": "z",
      "meta": {
        "name": "Fuel cap",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "capProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                8,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "start": [
            -76.95,
            154
          ],
          "pen": [
            {
              "type": "line",
              "id": "capProfile0",
              "to": [
                -74,
                154
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound0",
              "radius": 0.5
            },
            {
              "type": "line",
              "id": "capProfile1",
              "to": [
                -74,
                162
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound1",
              "radius": 1.2
            },
            {
              "type": "line",
              "id": "capProfile2",
              "to": [
                -77,
                164.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "capProfileRound2",
              "radius": 2
            },
            {
              "type": "line",
              "id": "capProfile3",
              "to": [
                -90,
                164.5
              ]
            },
            {
              "type": "line",
              "id": "capProfile4",
              "to": [
                -90,
                157
              ]
            },
            {
              "type": "line",
              "id": "capProfile5",
              "to": [
                -76.95,
                157
              ]
            },
            {
              "type": "close",
              "id": "capProfileClose"
            }
          ]
        },
        {
          "id": "cap",
          "type": "revolve",
          "profile": "capProfile",
          "axis": {
            "origin": [
              -90,
              8,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          }
        },
        {
          "id": "fluteProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -75,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            6.9,
            155
          ],
          "pen": [
            {
              "type": "line",
              "id": "fluteProfile0",
              "to": [
                9.1,
                155
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRound0",
              "radius": 1.05
            },
            {
              "type": "line",
              "id": "fluteProfile1",
              "to": [
                9.1,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRound1",
              "radius": 1.05
            },
            {
              "type": "line",
              "id": "fluteProfile2",
              "to": [
                6.9,
                161
              ]
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRound2",
              "radius": 1.05
            },
            {
              "type": "close",
              "id": "fluteProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "fluteProfileRoundStart",
              "radius": 1.05
            }
          ]
        },
        {
          "id": "flute",
          "type": "extrude",
          "profile": "fluteProfile",
          "distance": 3
        },
        {
          "id": "flutes",
          "type": "polarPattern",
          "body": "flute",
          "axis": {
            "origin": [
              -90,
              8,
              0
            ],
            "direction": [
              0,
              0,
              1
            ]
          },
          "count": 16
        },
        {
          "id": "fluted",
          "type": "boolean",
          "operation": "difference",
          "body": "cap",
          "tools": [
            "flute"
          ]
        },
        {
          "id": "ventProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 164
          },
          "pen": [
            {
              "type": "circle",
              "id": "ventProfileRim",
              "centre": [
                -90,
                8
              ],
              "radius": 2.2
            }
          ]
        },
        {
          "id": "vent",
          "type": "extrude",
          "profile": "ventProfile",
          "distance": 2
        },
        {
          "id": "ventRound",
          "type": "fillet",
          "body": "vent",
          "edges": {
            "between": [
              {
                "of": "vent",
                "role": "end"
              },
              {
                "of": "vent",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.6
        },
        {
          "id": "vented",
          "type": "boolean",
          "operation": "union",
          "body": "cap",
          "tools": [
            "vent"
          ]
        }
      ],
      "parts": [
        {
          "id": "tankCap",
          "name": "Fuel cap",
          "body": "cap",
          "material": "resin",
          "properties": {
            "partNumber": "ENG-196"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "cap",
                "role": "side",
                "from": "capProfile.capProfile5"
              },
              "origin": [
                -90,
                8,
                0
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000028",
      "up": "z",
      "meta": {
        "name": "Fuel tap",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "stubProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 107.5
          },
          "pen": [
            {
              "type": "circle",
              "id": "stubProfileRim",
              "centre": [
                -70,
                -18
              ],
              "radius": 2.95
            }
          ]
        },
        {
          "id": "stub",
          "type": "extrude",
          "profile": "stubProfile",
          "distance": 5
        },
        {
          "id": "hexProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 103
          },
          "start": [
            -63.649147,
            -18
          ],
          "pen": [
            {
              "type": "line",
              "id": "hexProfile0",
              "to": [
                -66.824574,
                -12.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound0",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "hexProfile1",
              "to": [
                -73.175426,
                -12.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound1",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "hexProfile2",
              "to": [
                -76.350853,
                -18
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound2",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "hexProfile3",
              "to": [
                -73.175426,
                -23.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound3",
              "radius": 0.4
            },
            {
              "type": "line",
              "id": "hexProfile4",
              "to": [
                -66.824574,
                -23.5
              ]
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRound4",
              "radius": 0.4
            },
            {
              "type": "close",
              "id": "hexProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "hexProfileRoundStart",
              "radius": 0.4
            }
          ]
        },
        {
          "id": "hex",
          "type": "extrude",
          "profile": "hexProfile",
          "distance": 5
        },
        {
          "id": "bodyProfile",
          "type": "sketch",
          "on": {
            "plane": "XY",
            "offset": 96
          },
          "pen": [
            {
              "type": "circle",
              "id": "bodyProfileRim",
              "centre": [
                -70,
                -18
              ],
              "radius": 4.5
            }
          ]
        },
        {
          "id": "body",
          "type": "extrude",
          "profile": "bodyProfile",
          "distance": 7.5
        },
        {
          "id": "bodyRound",
          "type": "fillet",
          "body": "body",
          "edges": {
            "between": [
              {
                "of": "body",
                "role": "start"
              },
              {
                "of": "body",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 1.5
        },
        {
          "id": "outletProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -22,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "outletProfileRim",
              "centre": [
                -70,
                99
              ],
              "radius": 2.4
            }
          ]
        },
        {
          "id": "outlet",
          "type": "extrude",
          "profile": "outletProfile",
          "distance": 12
        },
        {
          "id": "outletRound",
          "type": "fillet",
          "body": "outlet",
          "edges": {
            "between": [
              {
                "of": "outlet",
                "role": "end"
              },
              {
                "of": "outlet",
                "role": "side"
              }
            ],
            "count": 1
          },
          "radius": 0.5
        },
        {
          "id": "beadProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -28,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "beadProfileRim",
              "centre": [
                -70,
                99
              ],
              "radius": 3.1
            }
          ]
        },
        {
          "id": "bead",
          "type": "extrude",
          "profile": "beadProfile",
          "distance": 1.2
        },
        {
          "id": "spindleProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -80,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "pen": [
            {
              "type": "circle",
              "id": "spindleProfileRim",
              "centre": [
                -18,
                100
              ],
              "radius": 1.8
            }
          ]
        },
        {
          "id": "spindle",
          "type": "extrude",
          "profile": "spindleProfile",
          "distance": 7
        },
        {
          "id": "leverProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                -82,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "start": [
            -20.2,
            98
          ],
          "pen": [
            {
              "type": "line",
              "id": "leverProfile0",
              "to": [
                -15.8,
                98
              ]
            },
            {
              "type": "filletCorner",
              "id": "leverProfileRound0",
              "radius": 2.1
            },
            {
              "type": "line",
              "id": "leverProfile1",
              "to": [
                -15.8,
                109
              ]
            },
            {
              "type": "filletCorner",
              "id": "leverProfileRound1",
              "radius": 2.1
            },
            {
              "type": "line",
              "id": "leverProfile2",
              "to": [
                -20.2,
                109
              ]
            },
            {
              "type": "filletCorner",
              "id": "leverProfileRound2",
              "radius": 2.1
            },
            {
              "type": "close",
              "id": "leverProfileClose"
            },
            {
              "type": "filletCorner",
              "id": "leverProfileRoundStart",
              "radius": 2.1
            }
          ]
        },
        {
          "id": "lever",
          "type": "extrude",
          "profile": "leverProfile",
          "distance": 2
        },
        {
          "id": "leverRound",
          "type": "fillet",
          "body": "lever",
          "edges": {
            "between": [
              {
                "of": "lever",
                "role": "start"
              },
              {
                "of": "lever",
                "role": "side"
              }
            ],
            "count": 8
          },
          "radius": 0.5
        },
        {
          "id": "tap",
          "type": "boolean",
          "operation": "union",
          "body": "hex",
          "tools": [
            "stub",
            "body",
            "outlet",
            "bead",
            "spindle",
            "lever"
          ]
        },
        {
          "id": "grip",
          "type": "knurl",
          "body": "hex",
          "on": {
            "of": "body",
            "role": "side"
          },
          "at": 1,
          "length": 4,
          "pitch": 0.8,
          "pattern": "straight"
        }
      ],
      "parts": [
        {
          "id": "fuelTap",
          "name": "Fuel tap",
          "body": "hex",
          "material": "brass",
          "properties": {
            "partNumber": "ENG-197"
          },
          "connectors": [
            {
              "id": "seat",
              "on": {
                "of": "hex",
                "role": "end"
              },
              "origin": [
                -70,
                -18,
                0
              ]
            },
            {
              "id": "hose",
              "on": {
                "of": "bead",
                "role": "end"
              },
              "origin": [
                -70,
                0,
                99
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-000000000029",
      "up": "z",
      "meta": {
        "name": "Fuel hose",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "path",
          "type": "operation",
          "operation": "occt.shapes.wire.interpolatePoints",
          "params": {
            "points": [
              [
                -70,
                -34.55,
                99
              ],
              [
                -70,
                -38.5,
                99
              ],
              [
                -68,
                -44.5,
                98.5
              ],
              [
                -62,
                -50.5,
                98
              ],
              [
                -50,
                -56,
                97
              ],
              [
                -30,
                -59.5,
                97
              ],
              [
                -10,
                -61.5,
                98
              ],
              [
                4,
                -61.5,
                101
              ],
              [
                10.5,
                -61.5,
                103
              ],
              [
                14.5,
                -61.5,
                103
              ],
              [
                18.45,
                -61.5,
                103
              ]
            ],
            "periodic": false,
            "tolerance": 1e-7,
            "startTangent": [
              0,
              -1,
              0
            ],
            "endTangent": [
              1,
              0,
              0
            ]
          }
        },
        {
          "id": "hose",
          "type": "operation",
          "operation": "occt.operations.pipeWireCylindrical",
          "params": {
            "shape": {
              "body": "path"
            },
            "radius": 3.6,
            "makeSolid": true
          }
        }
      ],
      "parts": [
        {
          "id": "fuelHose",
          "name": "Fuel hose",
          "body": "hose",
          "material": "rubber",
          "properties": {
            "partNumber": "ENG-198"
          },
          "connectors": [
            {
              "id": "tap",
              "on": {
                "of": "hose",
                "role": "start"
              },
              "origin": [
                -70,
                0,
                99
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000002b",
      "up": "z",
      "meta": {
        "name": "Hose ends",
        "generator": "engine-app"
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "tapSleeveProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -29.3,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "tapSleeveProfileOuter",
                  "centre": [
                    -70,
                    99
                  ],
                  "radius": 3.9
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "tapSleeveProfileInner",
                  "centre": [
                    -70,
                    99
                  ],
                  "radius": 2.45
                }
              ]
            }
          ]
        },
        {
          "id": "tapSleeve",
          "type": "extrude",
          "profile": "tapSleeveProfile",
          "distance": 5.2
        },
        {
          "id": "tapClampProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                0,
                -30.5,
                0
              ],
              "normal": [
                0,
                -1,
                0
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "tapClampProfileOuter",
                  "centre": [
                    -70,
                    99
                  ],
                  "radius": 4.6
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "tapClampProfileInner",
                  "centre": [
                    -70,
                    99
                  ],
                  "radius": 3.7
                }
              ]
            }
          ]
        },
        {
          "id": "tapClamp",
          "type": "extrude",
          "profile": "tapClampProfile",
          "distance": 1.6
        },
        {
          "id": "carbSleeveProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                18.5,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "carbSleeveProfileOuter",
                  "centre": [
                    -61.5,
                    103
                  ],
                  "radius": 3.9
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "carbSleeveProfileInner",
                  "centre": [
                    -61.5,
                    103
                  ],
                  "radius": 2.45
                }
              ]
            }
          ]
        },
        {
          "id": "carbSleeve",
          "type": "extrude",
          "profile": "carbSleeveProfile",
          "distance": 3.4
        },
        {
          "id": "carbClampProfile",
          "type": "sketch",
          "on": {
            "frame": {
              "origin": [
                19.1,
                0,
                0
              ],
              "normal": [
                1,
                0,
                0
              ],
              "direction": [
                0,
                1,
                0
              ]
            }
          },
          "loops": [
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "carbClampProfileOuter",
                  "centre": [
                    -61.5,
                    103
                  ],
                  "radius": 4.6
                }
              ]
            },
            {
              "pen": [
                {
                  "type": "circle",
                  "id": "carbClampProfileInner",
                  "centre": [
                    -61.5,
                    103
                  ],
                  "radius": 3.7
                }
              ]
            }
          ]
        },
        {
          "id": "carbClamp",
          "type": "extrude",
          "profile": "carbClampProfile",
          "distance": 1.6
        },
        {
          "id": "joined",
          "type": "boolean",
          "operation": "union",
          "body": "tapSleeve",
          "tools": [
            "tapClamp",
            "carbSleeve",
            "carbClamp"
          ]
        }
      ],
      "parts": [
        {
          "id": "hoseEnds",
          "name": "Hose ends",
          "body": "tapSleeve",
          "material": "rubber",
          "appearance": {
            "faces": [
              {
                "faces": {
                  "of": "tapClamp",
                  "role": "side"
                },
                "color": "#9aa0a6",
                "metallic": 0.9,
                "roughness": 0.3
              },
              {
                "faces": {
                  "of": "tapClamp",
                  "role": "start"
                },
                "color": "#9aa0a6",
                "metallic": 0.9,
                "roughness": 0.3
              },
              {
                "faces": {
                  "of": "tapClamp",
                  "role": "end"
                },
                "color": "#9aa0a6",
                "metallic": 0.9,
                "roughness": 0.3
              },
              {
                "faces": {
                  "of": "carbClamp",
                  "role": "side"
                },
                "color": "#9aa0a6",
                "metallic": 0.9,
                "roughness": 0.3
              },
              {
                "faces": {
                  "of": "carbClamp",
                  "role": "start"
                },
                "color": "#9aa0a6",
                "metallic": 0.9,
                "roughness": 0.3
              },
              {
                "faces": {
                  "of": "carbClamp",
                  "role": "end"
                },
                "color": "#9aa0a6",
                "metallic": 0.9,
                "roughness": 0.3
              }
            ]
          },
          "properties": {
            "partNumber": "ENG-199"
          },
          "connectors": [
            {
              "id": "tap",
              "on": {
                "of": "tapSleeve",
                "role": "start"
              },
              "origin": [
                -70,
                0,
                99
              ]
            },
            {
              "id": "hose",
              "on": {
                "of": "tapSleeve",
                "role": "end"
              },
              "origin": [
                -70,
                0,
                99
              ]
            }
          ]
        }
      ]
    },
    {
      "schemaVersion": 1,
      "id": "e9a1c0de-0000-4000-8000-00000000002c",
      "up": "z",
      "meta": {
        "name": "Retaining ring",
        "generator": "engine-app"
      },
      "parameters": {
        "kind": {
          "type": "choice",
          "value": "bore",
          "options": [
            {
              "value": "shaft"
            },
            {
              "value": "bore"
            }
          ],
          "description": "Whether it sits in a shaft's groove or a bore's"
        },
        "diameter": {
          "value": 12,
          "unit": "mm",
          "min": 8,
          "step": 1,
          "description": "The diameter of the shaft or the bore it fits"
        }
      },
      "materials": [
        {
          "id": "aluminium",
          "name": "Cast aluminium",
          "density": 2680,
          "appearance": {
            "color": "#b9bdc1",
            "metallic": 0.7,
            "roughness": 0.45
          }
        },
        {
          "id": "steel",
          "name": "Forged steel",
          "density": 7850,
          "appearance": {
            "color": "#8e9399",
            "metallic": 0.9,
            "roughness": 0.3
          }
        },
        {
          "id": "pressed",
          "name": "Pressed steel, black",
          "density": 7850,
          "appearance": {
            "color": "#2b2d30",
            "metallic": 0.6,
            "roughness": 0.5
          }
        },
        {
          "id": "resin",
          "name": "Epoxy resin",
          "density": 1200,
          "appearance": {
            "color": "#1c1d1f",
            "metallic": 0,
            "roughness": 0.6
          }
        },
        {
          "id": "rubber",
          "name": "Rubber",
          "density": 1100,
          "appearance": {
            "color": "#26282b",
            "metallic": 0,
            "roughness": 0.85
          }
        },
        {
          "id": "exhaust",
          "name": "Heat-tinted steel",
          "density": 7850,
          "appearance": {
            "color": "#5d5a57",
            "metallic": 0.85,
            "roughness": 0.42
          }
        },
        {
          "id": "brass",
          "name": "Brass",
          "density": 8500,
          "appearance": {
            "color": "#b59a5a",
            "metallic": 0.9,
            "roughness": 0.32
          }
        },
        {
          "id": "gasket",
          "name": "Compressed fibre",
          "density": 1700,
          "appearance": {
            "color": "#6f6a60",
            "metallic": 0,
            "roughness": 0.9
          }
        },
        {
          "id": "copper",
          "name": "Copper",
          "density": 8960,
          "appearance": {
            "color": "#b87333",
            "metallic": 1,
            "roughness": 0.35
          }
        }
      ],
      "features": [
        {
          "id": "part",
          "type": "operation",
          "operation": "occt.parts.mechanical.retainingRings.din.retainingRing",
          "params": {
            "kind": {
              "expr": "kind"
            },
            "diameter": {
              "expr": "diameter"
            },
            "frame": {
              "origin": [
                0,
                0,
                0
              ],
              "normal": [
                0,
                0,
                1
              ],
              "direction": [
                1,
                0,
                0
              ]
            }
          }
        }
      ],
      "parts": [
        {
          "id": "circlip",
          "name": "Retaining ring",
          "body": "part",
          "material": "steel",
          "properties": {
            "partNumber": "Retaining ring {kind} {diameter}"
          },
          "connectors": [
            {
              "id": "side",
              "on": {
                "of": "part",
                "role": "start"
              }
            }
          ]
        }
      ]
    }
  ]
}
